After repair or construction work, a lot of materials remain. Fans of handmade items will no doubt find their use. After repair work in the bathroom, you can easily make furniture from pvc pipes with your own hands, using leftover materials for this.

Depending on the type of furniture that is planned to be made, the set of materials and tools may vary. But basically, you will need the following tools to work:

• perforator;
• screwdriver;
• hacksaw;
• scissors or knife.

Materials needed for work:

• pipe cutting;
• glue;
• connecting elements different shapes;
• plugs.

To make the furniture look more beautiful, paint is useful. Beds, tables, shelving can be painted in the color you like. For beds in the children's room, a delicate pink, blue, bright orange, yellow shade is selected.

PVC materials

Soldering iron for welding plastic pipes

Variety of types of plastic pipes

Types of plastic pipe connections

Stages of the plastic pipe welding process

Manufacturing and assembly process

Below are the diagrams, drawings necessary for the manufacture of furniture from pipes. With their help, you can make armchairs, chairs, beds, racks, tables, a huge number of decorative elements. Products are interesting, durable and safe.

Armchair

The original way to use plastic pipes is to make a chair out of them. There are many options for its manufacture. It all depends on the desire, capabilities and imagination of the master. Plastic pipelines can become a material for the manufacture of a chair. You can make it with pvc pipes, a knife and glue.

To get an unusual chair, you need to do the following:

• First, cut pieces of different lengths. The main thing is that the longest segments should be the same length. They will act as supports;
• long will be needed for the back, armrests;
• then the segments are glued together so that the surface of the armrests and the backrest is on the same level. To the bottom, the length of the segments changes.

Thus, it turns out an interesting chair that will decorate any room in the house. To make it even more comfortable, pillows are placed on it or sheathed with foam rubber. In such an armchair it is pleasant to spend time, read a book, watch TV.

Details under the letter "A" determine the width and depth of the seat. The length of the pipes "B" determines the height of the seat from the ground. Details under the number "C" are the height of the armrests, and under the number "D" are the height of the backrest.

The above method makes a table, a bed. Different segments are glued together - it turns out the base of the bed. On top of it you need to put a comfortable mattress, pillows, blanket. This is a perfect place to sleep and rest.

In addition, cribs are made from this material. To do this, you need to study the diagrams and drawings. Then prepare the desired size segments. They are connected with fittings. If you fasten the parts together with glue, they will be very strong and durable. Without the use of glue, the structure will turn out to be collapsible and can be removed at any time. The bed for the kid will be unusual, reliable and strong. If there is more than one child in the family, several beds can be made.

Another option bed for two children from pvc pipes - a bunk bed made of polyvinyl chloride, photo. It is not difficult to make it, you only need a drawing, a diagram. Following the instructions, you can create variety of options beds: single or double, bunk beds.

Table

It is possible to make such furniture from polypropylene pipes with your own hands, like a table. Its frame will be made of pipes, and the countertop will be made of any other material. At the same time, it must be remembered that PVC pipes are not suitable for heavy loads. The lighter the table top, the better.

The size of the countertop in this case will be 91.5 x 203 cm. The following materials and tools will be needed:

• door leaf as a tabletop;
• fasteners for connecting parts;
• drill;
• saw.

You will also need segments of the size:

• 30 cm - 10 pcs;
• 7.5 cm - 5 pcs;
• 50 cm - 4 pcs;
• 75 cm - 4 pcs.

To assemble the frame, prepare:

• t-shaped fittings - 4 pcs;
• plugs for pipes, fittings - 10 pcs;
• 4-way fitting - 4 pcs;
• cross fitting - 2 pcs.

According to the scheme, first assemble the side elements. Then proceed to the back of the table. Pay attention to the stability of the structure. All details must be the same.

The last step is to collect all the elements in one design. Inspect the product for irregularities, sharp parts. Carefully process everything, glue the connections. A table is made in such a simple way.

Tool

materials

Preparing parts of the right size

Connecting Fragments

Rack

Armchairs, beds, tables - not the whole list of products that can be made from this material. Another useful piece of furniture is a shelving unit. Design parameters can be very different. It all depends on the size of the room where it will be installed, and the desire of the master.

First of all, it is recommended to make a drawing, a diagram of the future product. Next, prepare the required amount of a certain size of parts for them. Connect everything together. Plywood or other material can act as the base of the shelves. The only thing to keep in mind is that the materials are not suitable for heavy loads.

Such racks are used for flowers, toys in the children's room. Shelving can be installed in the garage. There products will be a great place to store tools and other things. Can be placed on shelves garden tools: pots, tools. PVC products look unusual, neat, do not require additional decoration. Plastic shelves, racks do not harm the health of others, they are durable and environmentally friendly.

The nuances of working with the material

Models from water pipes are unusual, original. They decorate the room, garden plot. plastic furniture, made with your own hands, will bring zest to the interior, attract the attention of guests.

Furniture is made from plastic pipes. Two types of material are used in production: polypropylene (PP) and polyvinyl chloride (PVC). Each of them has its own characteristics and is suitable for the production of different products. Polyvinyl chloride is a cheaper material. It is more commonly used for sewer pipes. Its advantages include:

• strength and durability;
• ease of installation;
• low cost.

The disadvantage of PVC is that when exposed to high temperatures, the pipes begin to deform. Unlike them, products made of polypropylene are not subject to change in shape at high water temperatures. They are able to withstand liquid heating up to 60 degrees, and if the pipe is reinforced, even more.

Both materials are equally suitable for making furniture. In addition, there are a huge variety of items that are made from scraps. These are shelves, coasters, a frame for a mirror and more. Furniture is easy to assemble. The design consists of pipes and fittings, the elements are also glued together. Even a beginner can make pieces of furniture from pvc pipes with his own hands.

How to bend a pipe

Products made from this material look unusual. They will look even more interesting if they consist of curved parts. For example, a table with curved legs. In addition, various decorative elements are made from pipes, which come in different shapes. In such cases, bending the pipe is simply necessary.

For this you will need:

• funnel;
• sand;
• scotch;
• plate;
• metal containers;
• gloves;
• saw (hacksaw);
• knife (scissors);
• sandpaper;
• a device for bending pipes (it can be different, mostly improvised materials are used).

The process looks like this:

• cut a piece of the required length;
• seal one end with tape;
• using a funnel, pour in as much sand as will go in;
• heat the measured amount of sand in a metal container;
• put on protective gloves for safety, carefully pour sand into the pipe through a funnel;
• seal the other end with adhesive tape, then the sand will not spill out during the bending process;
• leave for a while, it will warm up from the inside;
• when it warms up, start bending;
• give the pipe the desired shape;
• at the end of the work, tear off the adhesive tape, pour out the sand;
• when the pipe cools down, it will be the required shape.

One end of the pipe is sealed with tape

Using a funnel, pour sand into the pipe

Having measured the required amount of sand, pour it into a metal bowl and warm it up well

Using the same funnel, pour the prepared sand back into the pipe.

Cover the other end of the pipe with tape. This is necessary so that the sand does not spill out during work.

Leave the pipe like this for a couple of minutes. During this time, it will warm up from the inside. The material will become soft and pliable.

While the sand is still hot, you can shape the cut piece of pipe into the desired curve or shape. After that, remove the tape and pour the sand back.

decoration

One of the options for decorating furniture made of pipes is to use different colors of the material. Table with legs of blue color will become a bright element in the room. Products are different colors: white, black, blue, blue, yellow. Connecting elements also come in different shades. Thus, the pipes will be one color, and the fasteners will be another. Combinations of white with blue or black with red look beautiful.

If we are talking about armchairs, chairs, they are decorated with decorative pillows. The foam lining on the back and seat is sheathed with a beautiful bright fabric. Decorative pillows decorate the product, make it cozy, comfortable, original. They come with embroidery, buttons or tassels. The color range of pillows is varied. When choosing it, it is necessary to take into account the overall design of the entire room.

Children's furniture should be interesting, colorful. It is recommended to cover the chair, high chair with a durable fabric with a bright pattern. It can be a cartoon character, toy cars, dolls, stars and much more. Pay special attention to furniture made of pvc pipes for children, it must be safe, without sharp elements. Otherwise, babies may get hurt.

It is not difficult to make furniture from pvc pipes. It will become a highlight in the room, will attract the attention of guests. Plastic pipes are inexpensive, so you can save a lot cash, because New furniture it costs expensive.

AT modern world, with its developed industry, there is room for a creative solution to any household problem. Crafts made from plastic pipes have become a tool for embodying fantasies in decorative art and engineering structures up to carports, greenhouses, swings and much more.

What can be made from plastic pipes

Products made of plastic pipes, due to their lightness, flexibility, strength and ease of assembly, have become a real storehouse of ideas for the creativity of many modern "Kulibins" and "left-handers". With the help of pipes, you can make furniture, garden and garden accessories, interior elements, entertainment for children, and even weapons with your hands. And it's not just the low price and availability of materials. The fantasy of people is constantly being embodied in new forms. The following is a selection of the 50 most interesting projects.

How to shape plastic pipes

Pipes can be given almost any shape, because they are interconnected and bent. For example, if you need to make a vault for a canopy, they may well be bent to a given radius, it depends on the diameter and thickness of the walls.

Homemade plastic pipes require the material to be given certain shapes. This is achieved by heating the material. For heating, a building hair dryer or a gas burner is used. It is necessary to warm up the plastic surface and while it is hot give it the desired shape. If there is no burner, you can heat the material over the fire of a gas stove. For not strong heating, it is enough just to fill the pipe with hot water.

The heated plastic is very soft, so special attention should be paid to creases in the bends. Cut plastic with a hacksaw or jigsaw.

Connection options

There are several ways to connect pipes for homemade products:

1. Socket connections. In order for the inner pipe to fit tightly and not dangle, a rubber sealing ring is installed inside it. Also, chamfer the smooth end and grease its tip with silicone. Such a connection is considered not very strong, but it is easy to disassemble. With its help, collapsible home-made structures are made, for example, garden furniture that is removed from the yard for the winter.
2. The second type of connection practically does not differ from the first, except that glue is used for the connection. In order for the segments to adhere better, it is necessary to thoroughly degrease the parts to be joined before applying the glue.
3. Fitting. may be detachable or non-detachable. With the help of couplings, it is possible to fasten sections of pipes of different diameters and even materials. Most often, inexpensive plastic compression couplings are used for homemade products. For fastening in places of bending of the structure, you can use another type of shaped elements - bends, tees and crosses.
4. Heating device ("palnik" or "iron"). It has little in common with well-known household appliances. This is a special machine for welding plastic pipes. The products to be joined are placed in the clamp of such a heater and stick to each other in a few seconds. This is the fastest and most reliable method, all joints are neat and tight. The only bad thing is that this heater is quite expensive and it is unprofitable to buy it for the sake of one craft.
5. Use of flanges. One flange is put on the connected ends, which is a sleeve, slightly larger in diameter than the pipe itself, with a thick washer with holes located at one end. After the flange is fixed on each segment, they are connected using bolts passing through the holes in the washer. For waterproofing, wide rubber gaskets are used. Not the most popular type of connection for homemade products. Flanges make the appearance of crafts more rough, not neat. But if brutality is inherent in the design of a homemade product, such connections will reveal the master’s intention in the best possible way.

To enlarge images, click on the photo.

garden arch

Arches are used to decorate the yard or garden plot. Very often they are used as an element of decoration of festive events. The upper part of the arch is assembled from curved pipes. To facilitate bending, you can heat them with a gas burner flame, but it is best to fill them with boiling water and bend them slowly. The upper part of the craft can be made using collapsible fittings. In this case, we get a folding arch, which is convenient to store and transport.

Privacy corner in kindergarten

According to the recommendations of the Federal State Educational Institution, the Center for Solitude and Relaxation is becoming a mandatory attribute for kindergartens and other preschool educational institutions. The frame of a privacy corner made of plastic pipes can be in the form of a house, a tent or a mink. Inside you need to put pillows, soft objects, plasticine, pencils and paper, toys that develop and distract attention. Outside, the craft is covered with a fabric of calm, not flashy shades. it is preferable to use materials of pastel colors. All this will allow the baby to relax a little, wait out the stress, distract from troubles and soon return to the group with his comrades.

Scuba for beach search

A beach scooter is used to search for small objects in the sand - coins, watches, chains, shells, and so on. It resembles a scoop with small holes in the bottom. To make a scuba, you need a piece of plastic pipe with a diameter of at least 100 mm, in the lower part of which you need to drill holes for the exit of sand, and make a handle in the upper part. The photo shows a homemade scooter for the manufacture of which a tap to a smaller diameter, a plug and a thin piece as a handle were successfully used.

Embroidery machine

Another interesting craft made of PVC pipes. In fact, this is a frame on a stand, designed to stretch the fabric on it. It is made of pipes connected by bends of 90 degrees. This allows you to make a geometrically correct square or rectangle. The angle of inclination is adjusted by means of a loose socket connection of the tee in the frame and the outlet in the stand.

Well from a pipe of large diameter

A plastic well is the easiest use or PVC. First, a hole is dug that reaches the level of groundwater. Then PVC of the appropriate diameter and length is placed in it to prevent the earth from shedding. Can be placed in a well submersible pump and arrange water supply to the house directly from the tank.

Swing for children

A swing made of plastic pipes is unlikely to withstand an adult. But for children not exceeding 20 kg, this is a completely feasible undertaking, and most importantly, it is safe. Swings can be installed in the yard and in the country, disassembling them into their component parts with the advent of winter. The photographs show two swing options - for the street and for the house. Compact home swings do not require any additional materials - only PVC pipes remaining after repair were used in the homemade product.

Child chair

A light chair made of plastic pipes and a cut of bright dense fabric will surely appeal to children. It can become a piece of furniture in a children's house or be used as country furniture. Remnants of PVC pipes, 90 degree bends and tees were used for the manufacture. The frame is fixed with glue.

Drilling machine

An electric drill or a screwdriver is a tool that is always found in a locker. home master. Of these, you can make a home drilling machine. You just need to fix it on a movable bracket. This will make the holes even, at a given distance from each other. Such a homemade product can replace a heavy and serious drilling unit. But it will require hard work. Without precise fitting and reliable fastening of the knots, one cannot do here.

Bed for strawberries in plastic pipes

The craft is a thick plastic tube with holes for plants located on top. This method of planting strawberries allows the ripening berries to lie on the plastic, and not on the ground, which makes harvesting easier. In the photo, a plastic pipe is used as the basis for a hydroponic system. Pots are inserted into the holes, to which a nutrient solution for plants is supplied.

vertical beds

This method of planting resembles the Hanging Gardens of Babylon. Pipes with plants sticking out of the holes in the upper part can be placed in several rows. Foliage covers the skeleton, giving the impression of plants hanging in the air. In addition to the original appearance, this placement of plants allows you to get good harvests even from small spaces. Vertical beds made of plastic pipes can be placed in narrow passages suburban area and even on the loggia or balcony of a city apartment.

Fence - fence for the site

This use of pipes is more decorative than applied. Such a fence will not stop intruders, but will household plot or the palisade is neater and more elegant. Moreover, the craft can be painted in different colors, which will give an additional decorating effect. All that is required for this is all the same trimmings, tees, 90 degree angles and plugs.

Rod-pod - stand for a fishing rod

Any fisherman knows what this device is for, and the ability to assemble it from pipes and carry it with you on a fishing trip makes it also convenient. A rod pod involves several rod supports, which can be easily achieved using short lengths of pipe and fittings. The main focus is to create a durable, easy to assemble and disassemble craft. For the fisherman, you can provide a light chair made of the same material. In the photo - a stand for two fishing rods.

Plant trellis

These are ordinary racks made of thick pipes with thin ones fixed to them horizontally. When building a vineyard, you need to rely on the fact that the load on the racks and crossbars will constantly increase, so you need to take into account the margin of safety for such a homemade product. Don't stop at simple rectangular coasters. The plasticity of the material will allow you to achieve the most bizarre shapes to decorate your garden!

Eaves for curtains from a plastic pipe

A stylish cornice made of plastic pipes can be made from the materials remaining after the repair. Flanges put on plastic brackets will help to tightly fasten homemade products to the wall. The curtains themselves are attached to the rings put on the pipe. Such crafts are recommended for light types of curtains. They will not hold heavy curtain fabrics. Cornices can be painted with metallic paints or left "as is".

Wine rack

A shelf or rack is used to store collection wines. For them, PVC pipe segments fixed in the form of a honeycomb are suitable. At the same time, each bottle will have its own “honeycomb”. The construction is a sawn 35-40 cm straight sections. They can be stacked in any order, fastened together, for example, with glue and filled with collection wine.

Dog pen

It is a frame of pipes of the required diameter, built in the form of a cube. The side walls are also assembled from pipes or partially covered with fabric or netting. This kind of homemade products is also suitable for arranging rabbitries, only a cube of pipes will already have sides of no more than 1 meter.

House made of plastic pipes for children

It can be done with gable roof, using for fastening on the roof ridge bends with a bend of 90 degrees. The walls of the house can be hung with matter, with windows cut into it. It is not necessary to use a classic-shaped house. Your kids will surely enjoy building in the shape of a pirate ship or a space rocket.

Partition of plastic pipes (screen)

The partition in the photo consists of 3 frames with an opaque material stretched over them. The frames are connected to each other by a movable hinge, which allows you to fold and remove the screen when not needed.

Support for bushes

This design resembles a support for a vineyard, only on a smaller scale. It supports plants and directs their branches in the right direction. With a little imagination, you can make, for example, Chinese rose grow in the form of an arch around the gate.

Barrier for doorway

Such a fence will be useful in homes where there are small children or pets. On both sides of the opening, tubes of a slightly larger diameter are attached, into which the frame is inserted, as shown in the photo.

Polyethylene pipe bow

We use the elasticity property of a plastic pipe to create a children's bow for shooting. We wrap the neck (handle) with a piece of pipe insulation and fix it with adhesive tape. A string of fishing line is fixed in a groove at the ends of the pipes, which end with plugs. Do not get carried away and give the craft too large a bending radius. Leave some headroom for the limbs of the bow when drawing and shooting.

Fixtures

Homemade pipe lamps amaze with the number of shapes and sizes. It all depends on the imagination of the person. In the photo there are only a few homemade products different types. The main thing when assembling a lamp from plastic pipes is to thread electrical wire so as not to suffer with this later, because the design can be quite complicated.

Clothes dryer

Of course, such a simple thing is usually bought at a hardware store. But it is much more pleasant and cheaper to use a homemade dryer. The assembly diagram in the photo does not require explanation.

flower pots

The simple design of the planter allows you to arrange flower pots not corny - on the windowsill, but in beautiful coasters throughout the house. Now you can not be afraid of puddles on the floor and walls resulting from the overflow.

Homemade sled

This homemade product is quite difficult to build, we do not recommend using it as your first pipe craft. But with a little experience, making strong and light sleds is not difficult. Very comfortable, fun and beautiful.

Towel dryer in the bathroom

Making a heated towel rail from a polypropylene pipe with your own hands allows you to create a non-standard design for placement in places for which it is impossible to pick up a finished model. The functionality of such a homemade product is much higher than the usual factory one.

mobile tent

It's the same children's house. But in this case, all connections are made with the expectation of easy assembly and disassembly. Very practical thing - does not take up much space, light and comfortable. Attention to tight-fitting fabric - it must be strong enough and waterproof to resist the vagaries of the weather. The craft can be used to organize a camp kitchen or protect from the sun.

Football goal

To play ball or field hockey, it is not necessary to have large iron goals. A fairly light construction made of PVC pipes, which is also easily disassembled with the advent of winter. Although small gates can be used in winter for playing ice hockey. The craft usually consists of 3 frames, but you can simplify it to 2 or even to one frame with a fabric stretched over it.

Clothes hanger

It is a vertical pipe with small "outgrowths" on top for clothes or a full-fledged structure for dressing room with horizontal pipes to accommodate a large number of things on the coat hanger. The photo shows a homemade hanger for children. For adults, the craft should be more durable and use pipes with a slightly larger diameter.

solar collector

Device for heating water. You need to place it on the roof and the longer the pipe, the more efficient the heating. Therefore, usually the "snakes" of the collector from plastic pipes are laid over the entire roof area.

Flower pots and vases

These crafts can be made from pipes and fittings of various diameters by simply sawing off a piece of the desired height. It is customary to decorate finished crafts with colored paper, and you can place them on a flower shelf previously made of PVC pipes.

Stand for kitchen appliances

Knives, forks, spoons different size can be inserted into vertically installed pieces of plastic pipes. Crafts are very convenient, and most importantly practical. Look creative in the kitchen. Your guests will be pleasantly surprised.

Pencil scissor stand

Pipes of different diameters fastened together, placed vertically, are a good storage not only for scissors and pencils. For compactness, they should be fastened into one block. It can be quite a functional desk organizer.

Holder for curling iron or hair dryer

Pieces of PVC pipes fixed in the bathroom will securely hold curling irons and hair dryers, and they will not melt when in contact with hot elements of appliances.

Watering hose holder

So that the hose does not lie in the form of an untidy, unraveling pile, it can be wound on a do-it-yourself PVC pipe holder. Practical and convenient homemade for the backyard.

Picture frames and mirrors

An original and even brutal device for storing photos, edging paintings or mirrors. Looks very impressive and unusual.

Bench made of PVC pipes

Pretty simple, but you need to use to connect good glue, because the shop should be not only beautiful, but also durable. A shop made of plastic pipes for a summer residence is cheap and tasteful.

garden bench

By complicating the design of the bench, you can additionally make the back - it turns out a very beautiful bench. You can use tubes of different diameters, for example, 50 mm for the side supports and 25 mm for the back and seat.

seedling containers

In fact, these are small flower pots or simply sawn 5-7 cm pieces of the desired diameter. Perfect solution problems for those who have plastic trim left after repair.

drip irrigation system

The practical direct purpose of a plastic pipe is water supply. Drip irrigation occurs through small holes that are drilled at predetermined distances. Now you can not worry about watering the site in between visits to the cottage. And flooding the roots with large volumes of water also no longer threatens you.

Desk Organizer

The device consists of segments of PVC pipes of different diameters and heights glued together. Looks creative on the table, suitable for home and office.

Bathroom Organizer

Convenient storage for toothbrushes, shaving accessories and other small items. And for each device will have its own separate cell. Looks great in the bathroom with other PVC crafts like towel warmer and mirror frame.

Shoe rack

Convenient storage, made of fragments with a diameter of at least 100 mm. The shoes are no longer standing under the door, but neatly folded on the shelf. Moreover, you can make as many levels as you like.

Glass holder

Installed above the bar. A large-diameter pipe is mounted horizontally and a cutout is made wide enough to pass through the thin stem of the glass. A great addition to a loft-style interior.

Place for bicycles

Homemade for holding the front wheel of one bike, and for 5, 10 or more. The number of cells corresponds to the number of bikes in the family. Do not forget about possible guests on two-wheeled vehicles. The craft is easy to disassemble for the winter and hide in the pantry for the next season.

Drill stand

The stand represents a cut in which the tool is placed so that it does not have to be looked for or it does not interfere during repair work, lying underfoot. Comfortable and most importantly practical.

Outdoor cinema screen frame

The frame of the screen is created by a frame made of PVC pipes with a white sheet stretched over it. Just think about the legs of the tripod. Ready-made factory options are not cheap, and a do-it-yourself screen will cost a penny.

Homemade catamaran made of plastic pipes

Pretty big and intricate piece. All fasteners must be carefully glued so that the catamaran does not fall apart. As floats, it is possible to use hermetically closing segments of large diameter.

Notebook Stand

It is a frame to support the laptop. Such a stand not only allows you to comfortably sit on a table, bed or sofa for work, but also ensures the removal of hot air from the lower and side planes, protecting the laptop from overheating.

Decorative interior elements and gifts

A creative approach will help create truly original things. When making, do not forget to decorate crafts with colored paper or paints.

Working with plastic pipes is not just a pleasure to create. This is the embodiment of the most daring ideas and fantasies. In addition, you do not need a special tool for work, sometimes a simple hacksaw, ruler and felt-tip pen are enough. Crafts can be done by the whole family, involving children in this. It strengthens family relationships and develops creative thinking.

What can be made from plastic pipes

For most, the question immediately arises: “is it possible to replace PVC pipes with polypropylene?” . You can use polypropylene pipes, only in this case we still need a soldering iron.

Advantages of PVC pipes:
- snow-white color;
- you can connect pipes with fittings with glue, or without it at all;
- if you do not use glue, then the structure will turn out to be collapsible, and like a LEGO constructor, you can use fittings and pipes to assemble other structures.
Of course, polypropylene pipes are deprived of these advantages.

And now, let's see what crafts you can make from plastic pipes with your own hands:

From plastic pipes you can make:

Highchair made of 1″ pipe

Camping folding chair from 1″ pipe

Country tables and chairs from 1″ pipe, for outdoor use

Greenhouses, greenhouses and light frames on the beds for sheltering plants, assembled from polypropylene pipes and connecting elements, are a very budget option that combines low cost and ease of assembly. If necessary, they can also be easily dismantled.

Strong and stable racks for growing and working with seedlings.

PVC pipes of a larger diameter, neatly sawn from above with a jigsaw and filled with soil, are a compact and aesthetic option for planting greenery.

Children's bunk bed (3/4″, 1″ and 1 1/4″ pipes were used)

Bed for dogs, the diameter of the pipe in this case is selected based on the size and weight of the dog.

Suspended swing for giving

Sledge for household work in the winter in the country

From the rest of the pipes of large diameter, you can make a small organizer in the garage

Clothes dryer made of PVC pipes.

Having attached, wheels we will receive rather convenient carts.

A greenhouse made of PVC pipes will serve you for many years, it does not need to be painted, and it will not rot or rust, as is usually the case with greenhouses made of wood and metal.

You can assemble hydroponics from plastic pipes, but in this case I want to note that you can use any pipes (including sewer pipes)

Children's car made of plastic pipes

Or make a pen for chickens

Racks that can be easily assembled to any size

Collapsible outdoor tents and tents made of plastic pipes

Grating grate made of plastic pipes that will always have a pleasant appearance.

Canopies for cars from plastic pipes

Fences and barriers made of plastic pipes

PVC pipes are an easily accessible material for useful ideas and household appliances. What do you need for this? Hacksaw, tape measure, glue, in some cases sandpaper.

1. Rack for drying clothes.

2. Drinker system in the chicken coop.

3. Little boy.

4. Shelves.

5. Rack for bicycles.

6. Rack for containers with vegetables.

7. Summer velomobile.

8. Various tool holders.

10. To store shoes.

11. Summer shower for kids.

Simple designs garden furniture, assembled from polypropylene pipes, will help you relax and unwind in a shady corner of the garden.

How do you, for example, comfortable models of chairs?

A comfortable sun lounger, an impromptu canopy for a morning meal in the fresh air, or such a “life hack” stand model that allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

Children in the country are a separate burning topic. The ubiquitous children must be given the opportunity to play and misbehave in such conditions that parents are calm.

For kids in the country, you can assemble such a comfortable playpen or a cozy toy house. These designs are easily transferred to the garden or to the veranda, and your child will always be in your field of vision.

Either from a desire to save money, or from an overabundance of imagination, our people have learned to benefit from those objects and things that a pedantic European would have sent to a landfill long ago. From plastic bottles they build greenhouses and make palm trees, cute garden figures from old tires, and any garden furniture can be assembled from wooden pallets. Scraps of plastic pipes left after repair can also be used to good use. They make the simplest decorative things, beds, chairs and even greenhouses - the scope for imagination is huge, and we have collected only the most interesting ideas crafts made from plastic pipes that can serve as a guide to action or a source of inspiration.

Pipe connection methods

Plastic pipes are like designer parts. By combining segments of different lengths and connecting them at different angles, you can get anything: a beginner will be glad that he built the simplest hanger, and a professional will easily assemble bunk bed. The main thing is to be able to connect the pipes correctly, and then it will be possible to do any thing necessary in the household.

Plastic pipes are the collective name for water, sewer and heating pipes that are made from polymers. PVC and polypropylene pipes are in the greatest demand. Segments of different lengths and diameters remain after the repair of engineering networks in an apartment or in a country house, and, as a rule, they are cluttered in pantries, or rather cluttered, until enterprising craftsmen began to use them for other than their intended purpose. Plastic pipes are characterized by low weight, high strength and durability, they are easy to maintain and safe.

Polypropylene pipes are connected using a special welding machine. It is expensive - it is more profitable to rent it, and it will take a little time to learn how to work with it. You can use compression fittings to connect. In any case, the assembled product will be non-separable.

When it comes to plastic pipe crafts, usually refers to PVC pipes, which can connect with each other in the following ways:

• socket connection with rubber seal. Manufacturers supply socket pipes with a rubber seal located at the end, thanks to which pipe connection work is carried out simply and quickly, and the joint is sealed. At the first stage, the socket of one pipe and the smooth part of the other are cleaned of dust and dirt. A chamfer is removed from the smooth end of the pipe (an angle of 15 degrees, chamfering cutters can be used) and a mark is applied indicating the depth to which the pipe will enter the socket. The sealing ring of the socket and the smooth part of the pipe are lubricated with a silicone compound and inserted one part into the other, focusing on the mark. For plumbing and sewerage, this is a good connection, but if you are assembling shelves or furniture, then it is not rigid enough. The main advantages: simplicity and the possibility of dismantling, therefore, such a connection is used for the construction of temporary buildings and things;
  
• adhesive connection. The ends of the pipes to be connected are chamfered (some just sand the surface), then marks are made indicating the depth of the fitting. The ends of the pipes are degreased with methylene chloride, then the adhesive is applied with a brush to the pipe and inside the chamfer or socket. The pipe is inserted into the fitting (or socket), rotated ¼ turn for better distribution of the adhesive, then the elements can be pressed for 30-60 seconds. It is desirable to carry out all work quickly. The remaining glue is immediately removed, and the connection is allowed to dry for several hours. The process is more laborious, but the joint is more reliable;
  
• flange connection. Separate sections are connected using special fittings. Before performing work, the ends of the pipes are cleaned. A flange is put on the cut, then a rubber gasket, onto which the flange is pushed. The elements are connected by means of bolts with a counter flange. Then the bolts are evenly tightened, due to which the alignment of the flanges is achieved. The connection is reliable, the design is collapsible.
  

When the technology for connecting plastic pipes has been mastered, we can assume that almost any craft can be done. It is only important to draw a sketch in advance or make a drawing, and correctly calculate the length of all segments. You can build anything from such parts - we will list only some ideas for crafts from plastic pipes with our own hands.

No. 1. Organizer

The most unpretentious way to use the remains of plastic pipes. You can take pipes of small and medium diameter, even segments of small length will fit. The first option is a mobile organizer. It is enough to cut segments of different heights and glue them together in an arbitrary order or following some pattern (for example, one higher segment in the center, the rest around it). Such a stand is suitable for storing stationery near the desktop or for organizing all kinds of carnations, bolts and other fasteners in the workshop.

The second option is stationary. On the one hand, the pipe must be cut at an angle (the most popular option is 45 degrees, but it can be less if small elements are stored). Then the cut elements are attached to a vertical surface using self-tapping screws. You can mount the organizer elements on a wall or a specially installed board.

No. 2. Decorative frame or partition

Thin rings, which are easy to obtain when cutting plastic pipes, are a versatile material for creating decor. You can use pipes of different diameters - it's even more interesting. Plastic rings make a wonderful frame. It is enough to draw a layout of the future product on paper in advance and glue individual rings directly on it. From them you can get both a strict symmetrical pattern, and something chaotic. If you then paint it, then such a frame for a mirror or a picture can hardly be called a simple craft - it will be a cool designer thing.

Similarly, you can get a decorative partition. Gluing, of course, will take a little longer, but the effort is worth it. The partition will look very interesting, weigh a little and come in handy, for example, to delimit zones in the bathroom.

Number 3. Shoe rack and wine bottle holder

It is not necessary to go to a furniture store for a shoe rack for the hallway if there are pieces of a large-diameter plastic pipe lying around on the farm. They must be cut into elements about 25-30 cm long (so that shoes of any size are guaranteed to fit) and connected to each other with glue or self-tapping screws. There can be as many sections in such an impromptu shoe rack, but in any case, the shelf will not take up much space, and at the same time it will be very roomy and original. The assembled product can be attached to the wall with self-tapping screws or first glued to a plywood sheet, and then fixed to the wall.

In a similar way, you can create towel rack in the bathroom. If you reduce the scale a little, you get a wonderful bottle holder– wine lovers will appreciate it.

If there are remnants of pipes of a very large diameter, then feel free to attach several of these rings in the bathroom - you will get nice shelves for all bath towels.

No. 4. Vases and flower pots

For transplanting or propagating indoor flowers, trimmed sewer pipes of medium diameter are perfect. If you decorate them with stickers or decorate them with paints, you will get very pretty pots.

Pipes of minimum diameter can be used as long stylish vases for artificial flowers and dried flowers. For decoration, you can use stickers or decoupage technique. On a plywood stand with pre-prepared recesses, you can install a whole composition of such vases, and elements of different heights look better.

No. 5. Shelves and stands

It is not difficult to make a small shelf or stand from plastic pipes, but it will be necessary to connect individual segments. First you need to decide on the size and shape of the future shelf. It is necessary to take into account not only the features of the interior, but also the amount of available material. Often bookshelves are made serpentine - they are somewhat reminiscent of traditional heated towel rails. This craft is perfect for storing books and photo albums.

Making a flower stand will require a little more time and effort, because it will be necessary to securely connect the legs together and figure out what material to make the countertop from. Usually, unnecessary pieces of plywood, chipboard or wood are used for this purpose. The material is given a certain shape and attached to a plastic base.

No. 6. Coffee table

The coffee table is made in the same way as the flower stand, only it has a larger size, so you will also need more legs and partitions between them. Think carefully about the size and design of the future piece of furniture, do not forget to depict everything on paper. On top of the plastic frame, as a rule, a glass tabletop is attached.

Turn on your imagination and look for non-trivial approaches. For example, the base for a table may not be a typical frame with legs and partitions, but a lot of pipe sections of different diameters glued together. Even better if the pipes are of different heights. In this case, even master the nuances correct connection PVC pipes are not required.

No. 7. Clothes hanger

From pipe sections, you can assemble several options for hangers:

There are a lot of options to organize the storage of clothes using plastic pipes, and all these crafts are quite simple to implement.

No. 8. Rack for living room, hallway, pantry

By connecting several pipe sections in the required order, you can get a practical and inexpensive rack that will fully satisfy your needs in terms of size, shape and configuration. It can be both quite modest in size, and a real giant. If the rack is located in the living room, then the pipes can be painted, and glass or plywood can be used as countertops. When it comes to a pantry or a workshop, there is no particular need for decoration.

No. 9. Football goal

If the summer cottage has a place for children's games, then you can build a small football goal. Only a few connections will need to be made, but before that, of course, everything will have to be carefully calculated and measured. When the frame is ready, a mesh is put on it, and the gate is ready. When the kids grow up, the product can be disassembled, and the pipes can be reused to create other crafts.

Similarly, you can make a small children's playhouse. We all once loved to build huts, gather there with a company and play. It was especially cozy and mysterious. The frame for the house of pipes is made elementary. Children will only have to throw a thick fabric over it and enjoy their own little castle.

No. 10. Arena for children

There is nothing complicated in the design of the playpen. However, the finished product in the store is not cheap. A budget alternative is available to those who have a decent amount of plastic pipes in stock, the time and desire to learn how to connect individual segments into a single structure. For manufacturing, you will need a lot of pipes, so home craftsmen advise you to just buy them in a store - it will still turn out cheaper than a ready-made arena, and the pipes can then be reused.

After the arena scheme has been created with an indication of its dimensions, pipes are cut. Vertical partitions are interconnected by short horizontal sections of pipes at the top and bottom. However, variations are possible in the design of the arena.

No. 11. Chairs made of plastic pipes

Here you will need already confident skills in connecting individual pipe sections. Depending on your desire and degree of preparation, you can make a simple children's stool, as well as a comfortable chair for adults, or even an armchair. After the frame is ready, the seat is made. It can be woven from thread, rope, or use a dense fabric. Then you can put soft pillows on top. Having mastered the manufacturing technique, it will be possible to build almost all the furniture for a summer residence.

No. 12. bunk bed

Yes, it is quite possible to assemble a frame for a bunk bed from ordinary plastic pipes. Not only supporting elements are made of pipes, but also a ladder, and, of course, lamellas for a mattress. The level of complexity here is increased, it is better to take up the work for those who have already tried their hand at making more simple crafts. Do not neglect drawing up a drawing and scrupulous measurements.

A bed made in this way will be a real find for country house a small area, because not everyone can afford to buy a ready-made bunk bed for a summer cottage, but somehow it is necessary to solve the placement problem.

No. 13. garden arch

How beautiful the arches entwined with plants and flowers look in the garden. The main difficulty in making a garden arch from plastic pipes is that individual segments will have to be bent. The easiest way to give the necessary shape to the pipes is with a gas burner. A separate section is heated to a state where the material will succumb to deformation, then it is given the necessary shape. Someone decides not to bother and just connect several pipe sections at an angle. Then the upper part of the arch will resemble a trapezoid or a polygon in shape. Between the two arched vaults, horizontal elements are attached so that in the future the arch will be as much as possible covered with greenery. Do not forget to securely fix the structure in the soil.

No. 14. Alcove

Constructing a gazebo out of plastic pipes is much easier than anyone can imagine. If you take long enough segments, then you don’t even have to connect anything. Two pipes of the required length are arched and fixed to the ground. The distance between the elements of the future frame should be such that a dining table or other pieces of garden furniture can fit. It remains only to stretch the dense awning fabric, and you're done.

The design of the gazebo may be slightly different, resembling a house in shape. In this case, you will have to connect individual elements.

No. 15. carport

The design itself is simple, but the difficulties can be associated with a decent size of the canopy, because it must be wide and high enough so that the car can safely hide under it. The frame is assembled with special care, fastened to the ground and to the adjacent wall, if any, covered with a dense awning fabric on top, which will protect the car from the scorching sun and rain. To call this product a handicraft, even the tongue does not turn - this is already a small architectural form.

No. 16. Greenhouse

A small greenhouse is done elementarily. You will need a few pipes, there will also not be very many connections. After the frame is assembled and fixed in the ground, all that remains is to cover it with a film or agrofibre. It will be possible to make such a greenhouse in just a couple of hours, and the benefits from it will be huge.

No. 17. Greenhouse made of plastic pipes

Building a full-fledged greenhouse, of course, is more difficult than a greenhouse. It will take a lot more material, and it will take a lot of time. The size of the greenhouse can be almost any. The procedure is as follows:

From pipes, you can make a frame for a greenhouse of almost any shape, but the arched one remains the most preferable.

No. 18. seedling containers

If everyone in the country square meter on the account, it's time to implement the idea of ​​​​vertical gardens. Thus, it is convenient to grow greens and some berries. Excellent containers will come out of scraps of plastic sewer pipes if you cut holes in them in advance with a jigsaw for seedlings and outflow of excess water. It remains only to fill the soil containers and place the vertical beds one above the other. You can attach them again to the stand of plastic pipes. Some connect the beds with ropes and hang them from the wall - there are many options.

Long lengths of sewer pipes are useful for growing garden strawberries. They will stand upright like columns. Holes for plants are prepared in advance in them, and pipes of smaller diameter are laid inside. Thanks to the small holes in the latter, water will freely flow to the seedlings.

No. 19. Feeder for chickens

Anyone who builds a chicken coop in a barn in the country is well aware of the problem when birds scatter food from the feeder. If several sewer pipes with a characteristic bend at the end are vertically fixed in the chicken coop, then it will be possible to add grain to the birds without going into the barn. Moreover, they will no longer be able to sprinkle chicken feed, which means that it will be cleaner in the chicken coop, and there is a decent saving on grain.

No. 20. drip irrigation system

Such a craft will greatly simplify lawn care, and everything is very simple to do. Several pipe sections must be connected in the form of a square, lattice, or in any other way. In the finished design, it is important to make a sufficient number of small holes, connect to the resulting system watering hose- and the mobile drip irrigation system is ready.

An open shower is done in the same way. A cube or parallelepiped of sufficient height is assembled from pipe segments, many small holes are made in the upper part and water is supplied through a hose. The result is a great place for a summer holiday.

No. 21. Fencing for the site

We note right away that a lot of pipes will be needed, but in the end a rather nice and durable fence will come out, which will not need to be painted every year, because plastic does not rot and does not rust. You will have to work on numerous connections, and a pre-prepared sketch will greatly simplify the process. Of course, such a fence will only perform a delimiting function - it will not provide protection from intruders and uninvited guests.

No. 22. Fixtures

If hands grow from the right place, then pipes can be made designer lamp in techno style. The product can resemble a man, an animal, be floor or desktop - there are a lot of options, and they are limited only by your imagination. The difficulty in this case lies not only in the huge number of connections, but also the need to attach a bulb holder and connect power, so you can take on the job if you have minimal skills in working with electrical and lighting equipment.

However, it is not at all necessary to make a lot of pipe connections. You can take segments of different lengths and diameters, make a nice system of holes in them, install a lamp (or even garlands) inside, and as a result you will get a very stylish piece of furniture.

Other ideas

Enumerate all the possible options for crafts from plastic pipes can be infinitely long. Here are some more ideas for inspiration:

• rod stand;
• woodcutter;
• cart;
• parking space for bicycles;
• bar counter;
• cornice;
• children's swing.

Unless the car can not be made from a plastic pipe - everything else is quite possible. The main thing is that fantasy works and there is a desire to achieve results.

Interesting coffee table made of plastic pipes

Plastic pipes, as a material for making furniture, are good for their availability and low cost. For those who live outside the city or have a summer cottage, the situation is familiar when, after construction, laying communications or organizing drip irrigation, pieces of pipes of different lengths remain. At first glance, they can only be thrown away. This is a very erroneous opinion, because it is from such pieces of different diameters and lengths that many original and useful interior items can be made. It is only necessary to apply a little skill and desire to work with your own hands, imagination.

Do-it-yourself bunk bed made of plastic pipes

Convenient and roomy rack made of pipes for a pantry or hallway

The list of such crafts is limited only by human imagination. From this material you can make items that are necessary every day: clothes dryers, shelves, racks. A laptop stand, various glasses for pens and pencils can decorate life and make it more convenient. Original beds made of polypropylene pipes, armchairs will become the main accent in the interior of the bedroom, without burdening the family budget. If you bring your creative imagination, you can create cabinets, a huge number of options for storing various items. Moreover, they can be placed in the house, garage, on the loggia, veranda, in the yard. Everywhere they will look appropriate and original. A table and chairs made of plastic pipes can be placed on the veranda, in the kitchen, in the nursery. In the yard or in nature, collapsible canopies from the sun and rain, various portable structures will be useful. Owners of summer cottages and household plots make comfortable greenhouses, install gazebos, benches that can be left outside in any weather. Folding chairs made of PVC pipes are necessary for fishing, during barbecue trips.

DIY folding picnic chairs for children

The advantages of creating products from plastic pipes with your own hands

Convenient and roomy whatnot made of plastic pipes

Making furniture from PVC pipes with your own hands brings satisfaction and joy, helps the development of creative inclinations, decorates everyday life makes it easier and more comfortable.

Comfortable chaise lounge with a table for a relaxing holiday in the country

Do-it-yourself furniture made of plastic pipes has a number of advantages.

1. Such production takes a little time and effort. It does not require years of practiced skills. Both a teenager and a woman can easily cope with the task.
2. Products have a rigid, stable design that can withstand heavy loads.
3. The furniture is mobile and light. It is easy to move, rearrange, simply assemble or disassemble and put away for a while in the pantry. It takes up little space this way.
4. PVC pipes are resistant to moisture and corrosive environments, do not rust. Furniture from them perfectly tolerates adverse weather conditions. It does not lose its performance, retains its original appearance after a long stay on the street. It is easy to care for it, tolerates washing, cleaning.
5. From this material you can make a huge number of useful things. The only limitation is the fantasy and imagination of the master.
6. Low material cost.
7. The ability to create items with an original author's design that cannot be bought in a store.

Children's bed made of PVC pipes for babies, made by hand

Choice of construction and design

Glamorous pink plastic tube laptop stand

The manufacture of furniture begins with the choice of design and the variant of its design implementation. It is necessary to build on the function that the furniture will perform. Then select the design parameters:

• collapsible or solid;
• dimensions of the entire product;
• the number of elements and their sizes;
• method of connecting parts of the structure.

Convenient bar counter for giving from plastic pipes

When thinking about design, you can be inspired by browsing magazines and furniture catalogs, websites about furniture on the Internet. Optionally, it will be furniture made of polypropylene pipes. Original ideas may arise when viewing furniture options made of rattan, wood, metal.

Stand for storing things from plastic pipes for the boiler room

This stage of work ends with sketching, defining necessary materials preparing cost estimates. At the same time, it is necessary to take into account how you can use those materials that are already available, as well as availability, if materials need to be purchased in addition.

Large and beautiful table with PVC pipe legs

What materials are needed

Necessary materials for creating furniture from PVC pipes

After the design is selected, it is necessary to draw up a list of materials and tools needed to create crafts. For this you may need:

• plastic pipes;
• fasteners: glue, screws, self-tapping screws;
• fitting.

Stages of the plastic pipe welding process

Plastic pipes are easy to cut. After that, a sharp edge with burrs remains, which must be cleaned. Just cut the thread. When heated, polymer pipes bend well, retaining a new shape after cooling. Sometimes the frame is easier to bend than to assemble with pieces of pipes and fittings.

Plastic pipes of various shapes and fittings for them

There are several types of plastic pipes. All of them differ in price and ability to withstand various loads and temperature conditions. Knowing the properties of each type of pipe, you can make the best choice and save.

They are divided by purpose:

• plumbing
• sewer.

Variety of types of plastic pipes

In terms of furniture manufacturing and useful gadgets for everyday life, sewer pipes, unlike water pipes, benefit from a lower price. They are made in large diameters.

According to the type of polymer from which the pipes are made, they are divided into:

• polyvinyl chloride (PVC);

PVC pipes of different diameters and colors

• polyethylene (PE);

Polyethylene pipes of large diameter, straight and corrugated

• polypropylene (PP).

Polypropylene pipes and fittings

They differ slightly from each other in properties. Polyethylene behaves worse at elevated temperatures and under the influence of sunlight, it is elastic. Polypropylene pipes are more durable and rigid. The positive quality of PVC pipes is increased resistance to chemical attack and reduced flammability. They tolerate ultraviolet exposure very well. Difference in performance characteristics polymers in most cases will not be critical for the manufacture of furniture. But the difference in price is a factor that should be taken into account. The most expensive are polypropylene. PVC pipes have the best price-quality ratio for creating furniture structures.

In addition, pipes are reinforced and non-reinforced. Polymer pipes are most often reinforced with fiberglass or aluminum. The reinforcing layer is soldered between two polymer layers. This is done to increase strength, rigidity, and reduce linear expansion when heated. Reinforced polypropylene pipes are used for hot water supply. The letters RC are added to the designation of the reinforced pipe. By appearance they can also be distinguished. In addition, some manufacturers apply a colored strip along the pipe, informing about the scope of the product. Pipes with a blue stripe are used for cold water supply, with a red stripe for hot water or pipelines with a heat carrier. The presence of both bands indicates the versatility of the pipe. It should be borne in mind that reinforced pipes, although stronger, are much more expensive. Make a decision on the advisability of additional costs to the master.

Trolley with fastening made of plastic pipes

What tools to use

In order to update your interior with crafts from plastic pipes with your own hands, you need a minimum amount of tools:

• hacksaw or special scissors for plastic pipes;
• pencil or marker;
• roulette;
• file;
• special soldering iron for plastic pipes;
• drill.

Do not interfere with gloves and protective glasses. Despite the fact that working with PVC pipes is not dangerous, shavings fly when sawing, sharp edges remain. In order not to damage your hands and eyes, it is better to use protection.

Basic principles for the manufacture of objects from polypropylene pipes

Beautiful and useful things made by hand from polypropylene pipes

To make useful beautiful things from plastic pipes, desire and creative imagination are needed. You can not do without knowing the basic principles of work. When working with plastic, the following sequence of actions should be observed.

Convenient shoe rack in the hallway with your own hands

1. Structural study.
2. Drawing up the scheme of installation of the product, the choice of fasteners.
3. Preparation of elements (cutting pipes of the required length and quantity).
4. Mounting the frame with fittings, glue or soldering.
5. Training additional elements designs.
6. Assembly of the entire product and strength control.
7. Painting or other decoration, if intended.

Beautiful canopy for a baby crib with plastic pipe construction

Finishing stage - decoration

DIY hanging garden swing for a summer cottage

Crafts from plastic pipes look spectacular and extraordinary, but additional decoration enhances this impression.

1. Painting the finished product or its individual parts with acrylic paint. There are many different colors and shades on the market. She looks bright, tolerates cleaning well.
2. Decorative self-adhesive film a good option for decorating furniture and interior items from polypropylene pipes. If you choose the right picture, it is not always possible to determine that the furniture is made from pipe waste. Coated with varnish, such items acquire moisture resistance, and the service life increases.
3. Adds originality by drilling round or curly slots. This decoration method is suitable for glasses, lamps, mirror frames.
4. Painting or carving on the surface will decorate many items made of plastic pipes.
5. Unique crafts are obtained by combining plastic with elements made of tin or plexiglass.

Examples of exclusive coffee tables with a base made of plastic pipes

With a little effort and imagination, you can inexpensively and quickly create new interior in a country house or yard, organize a comfortable comfortable space around you. Polymer pipes are suitable as a material due to their lightness, plasticity, resistance to corrosion and moisture. it modern material allowing you to create unique designs. Furniture made of plastic pipes has a wide scope. Beautiful objects made from pipes with their own hands cause satisfaction and fill with pride. The reward for the invested efforts is an unusual atmosphere, a comfortable life.

Safe kindergarten chairs for toddlers made of plastic pipes

Video: do-it-yourself comfortable folding chair made of PVC pipes