All children look forward to winter. After all, this time of the year brings with it a lot of entertainment and fun. New Year holidays are far from all that the cold season is ready to offer. Skating and skiing, throwing snowballs, perky sleigh rides - all this and much more gives us a generous winter. If you want to give joy to yourself and your loved ones, learn how to fill the hill.

You will need:

• Shovel;
• Bucket;
• Watering can;
• Warm gloves;
• Rubber gloves;
• Wooden plank.

Engineering survey

• To get started, look at the area where you plan to place a homemade attraction. Of course, the longer the track, the more fun it is to slide down it.
• In order to properly fill the ice slide, remember: the slope should not be made too steep. The ideal ratio of height and length is 1 to 4.
• In addition, it is necessary to equip the so-called "roll-out". This is a flat area that will continue to slide. It should be about one and a half times longer than the inclined surface.

Construction technology

1. Filling the hill, put on warm gloves, and on top - thick rubber ones.
2. It is best to wait for a thaw, then it will be easier to work. Roll up balls of snow and lay out the base from them according to pre-prepared sizes.
3. Before pouring the hill, you need to take care of the ladder, along which you will have to climb the hill. It can also be made from similar clods. Make and lay wide steps.
4. Thoroughly tamp the surface with a shovel.
5. It is better to fill the ice slide when it starts to freeze again. This should be done with warm water. You can use a garden watering can, evenly distributing the liquid.
6. You may notice that bumps and indentations will appear. They need to be patched up. Use the snow, divorced cold water, apply it with a regular spatula.
7. From the snow mass you need to build borders. This will make the entertainment safe.
8. After you manage to properly fill the slide, take a flat board and go over the surface with it in order to get rid of any remaining irregularities.

Now is the time to invite the neighbor's kids, who will be happy to test the device for strength. It seems that it will not be difficult for you to fill the slide yourself. Of course, you have to spend several hours at work. However, until spring you will be able to have fun and actively relax without leaving your own yard.

Sleighing, skiing, skating and other fun activities open winter for us. To give real joy to your own kids, it is worth figuring out how to properly fill a snow slide. Let's try to understand this issue.

Choosing a place to build a slide

Before answering the question of how to properly fill the hill, let's find out in which places it is better to form it. It is recommended to select safe zones. It is desirable that the slide be away from trees and shrubs, the roadway, all kinds of drains and manholes, deep ravines, and other objects that can cause injury during the descent.

It is better to choose a spacious area. The higher the hill is planned to be built, the more free territory should be available. Of course, going down from a high, massive slide, the slope of which is made with all sorts of turns, will be much more fun.

slide size

The width and height of the future structure will depend on the amount of snow available, the reserve of one's own strength and patience. If you plan to make a slide for very young kids, do not get too carried away. For the smallest, a structure of the most modest size will suffice. So what should be the dimensions of the slide? As practice shows, the ratio of the height of the structure to its length in the ratio of 1:4 is optimal.

How to fill a hill of snow with water? In addition to the descent itself, you will need to create a rollout. The latter is a flat, trampled and icy territory, along which the sliding will continue for some time until it stops.

Tilt angle

Trying to figure out how to properly fill a hill of snow, you should not make the descent too gentle or, conversely, too steep. The ideal at the top point is considered to be a slope of 30-50 °. Further, the height of the descent must be gradually reduced, trying to make the slide evenly flat until its very end.

How to build a hill?

It is convenient to build a slide using large balls of snow prepared in advance. The latter must be tightly laid to each other, and fill up all the gaps with a shovel. The resulting mass of snow must be well compacted. The result is a base on which it will be convenient to create a descent, railings, and other elements.

steps

To make it convenient to use the slide for both children and adults, you should take care of creating steps. They need to be placed on the highest side of the structure. The optimal width for the steps will be from 40 to 50 cm. This will allow people with the most different size legs. On the sides of the steps, you can make low sides, which will be handy to grab while climbing.

How to fill the hill with water?

Now let's move on to the issue of filling. Before proceeding with the procedure, it is necessary to let the slide stand for several days at rest. This will allow the frame to compress and get stronger as much as possible. Thus, the snow structure will not fall apart after the first ride.

How to fill a hill correctly? It is necessary to perform such work when severe frosts are observed on the street - from -20 ° С. Otherwise, the shape of the structure may "float". The best time for filling the slide with water is the evening, when the sun has already managed to hide behind the horizon.

People who are well versed in how to properly fill a hill with water recommend first walking on its surface, spraying small drops with a spray bottle. After a few hours, the structure will be covered with a thin ice crust, which will allow you to proceed with the main pouring.

It is convenient to water the hill with water from a watering can. This must be done slowly. Indeed, with a large flow, there is a risk of large gaps in the thickness of the snow. Oddly enough, the water should not be the coldest. Using barely warm water, you can get a perfectly smooth surface much faster. If, with this solution, voids form on the surface of the snow, they should be immediately sealed with snow slurry, leveling with a piece of cloth. If you leave such shortcomings without attention, when riding on the notches, you can scratch or tear your clothes.

How to fill the hill in the place of descent? To do this, you need to mix snow into a container with water. The resulting slurry must be laid out on the descent, leveling with a construction spatula. For safety, it is worth building curbs along the entire length of the ramp and treating their inner surfaces in the same way. Then you can leave the slide alone until the ice layer completely solidifies.

After complete freezing, the structure can be doused with water again. Then it is worth walking down the slope with a polished board. As a result, the slide will become even more slippery and smooth.

Finally

Using the above recommendations, it will not be difficult for an adult to build a slide and fill it with water. The main thing is to show imagination and do the work carefully. Naturally, the implementation of the plan may take a whole day or even more.

However, the effort spent will pay off with interest, because with the help of an ice slide, kids will be able to have fun from the beginning of the first frost until spring, without leaving their own yard. By the way, it will be possible to go down from such a makeshift structure not only in warm clothes, but also on rubber mats, cardboard and even a sleigh.

It is necessary to build and fill the slide at sub-zero temperatures

News of Tyumen and the Tyumen region - 21.12.2015

The most pleasant memory from childhood is, of course, winter fun. Games in the snow, sledding, skating, skiing and slides. We will talk about the latter in more detail and describe how from the snow and how to fill it correctly.

How to build a slide with your own hands in Tyumen

In practice, many faced a serious problem when. It either breaks up, then collapses, then pits form on it after pouring. We will teach you how to make the right slide yourself without any extra physical effort.

So, let's begin. To blind the slide yourself, you will need:

- Pure snow

- Water is cold)

- Shovel or stretcher

- Bucket, watering can

- Broom

To make a hill of snow, you need to start from a few simple rules:

Choose a safe place

1) If you build it in kindergarten or in your backyard, you don't have to beware of nearby roads. And if you are making a slide in an unfenced area, then you need to choose a safe place. Away from the roadway, away from various obstacles, bushes, trees, fences, and so on, so as not to harm the child.

You need to build a hill from pure snow

2) After the place is determined, it is necessary to drag a lot of clean snow. The average and safest slide for children is from two to four meters. You can drag snow either with a stretcher or with a large shovel. We used a shovel. Let's say in advance to build a meter slide, it took us half an hour. Most of the time was spent on bringing the necessary amount of snow to the place. Then we collected the snow in one heap and formed a base from it - a hill.

How to make steps and sides of a snow slide

3) After the base, we make steps. They are easy to make with a shovel. It is necessary to compact first with your feet, and then form with a shovel. It is important to make them comfortable and small so that the child can easily climb to the top. By the way, the safe width of the steps is from fifty centimeters. Let's not forget about the sides. They can also be made with a shovel and hands. Choose the height based on the height and weight of your child. On average, the sides are made 10-30 centimeters.

How to fill a hill of snow

4) When the base of the slide is formed, we proceed to the most difficult process: pouring. The slope is filled only with cool water from a watering can, a hose with a spray nozzle or a bucket. It should be remembered that it is necessary to fill in at a low temperature - on average from minus 10-20 degrees. Otherwise, all your efforts are down the drain. Important! It is necessary to fill in a hill in three-four stages. To make the slide smooth, without holes and bumps, you need to use an ordinary broom when pouring. Yes, yes, a broom! With a broom we level the surface of the slide, and your children can easily slide down the hill with great pleasure!

When pouring a slide, you need to slam the surface with a broom

5) A hill of snow is poured with water several times. After the first, a thin and brittle crust forms, after the second - a rough frost, and the third time can be poured for the greatest strength and smoothness of the surface. When you fill the hill for the first time, slam the surface with a broom! If you follow all these rules, then you will get a great homemade slide!

• Choose pure snow! If you neglect this rule, then when it gets significantly warmer outside, your children may get dirty!

• Try to make the hill more even, without holes, depressions and bumps. If there are sharp bumps on the slide, children may tear their clothes.

• A good and best height for children is two meters, and for older kids - three, four meters or more. For small children, it is better to make the necessary supports to avoid falls.

• You need to ride the hill on the ice. Ice can be bought in a store for an average of 100 rubles or made by yourself. You can make an ice cube from linoleum or use a simple piece of cardboard.

In winter, for most children, the best entertainment is a snow slide. Combining this activity with snowman modeling and snowball fights, you can have a great time outdoors. Moreover, during the winter holidays, options active rest must be associated with visiting the street.

In order to get the maximum pleasure from a quick descent, you need to know how to properly fill the slide. This requires the presence of certain conditions and certain means. The most important of them are snow and frosty weather. In case of their absence, the skiing venture will have to be postponed until the appropriate weather conditions arrive.

We pour a hill of snow

Initially, you need to build a hill of the required height and desired design from the snow and carefully compress all the snow elements. This will make it durable and will not let it sink during active use. In order to avoid the question of how to fill the hill correctly, you need to perform all actions in strict sequence and not neglect any of them.

We strengthen the hill with water

The next step is to fix the snow slide and give it strength. But before this, the existing structure must be allowed to settle and sit down for several days. After that, in the presence of a strong frost, it can be applied to the entire surface of the slide. cold water. To keep the snow surface intact, it is best to spray water. Otherwise, the snow will simply melt, forming grooves and bumps.

Watering a hill from a watering can

Another option for how to properly fill a hill in winter can be to use a watering can for this purpose. It, filled with water, needs to be watered over the entire surface of the snowy mountain from the base to the top. Moisture should be evenly distributed over the entire pitched area. This will keep the surface smooth after the water has completely frozen.

Let's make the surface of the slide smooth

In order to understand how to properly fill the hill, you need to take into account such a moment that in the event of the formation of pits and irregularities, clothes may be damaged when sliding over them.

To eliminate such a plan of defects, you need to use a small amount of snow mixed with water to the consistency of gruel. With this mixture, you need to close up all the recesses and smooth out all the bumps. If necessary, it can be used to apply over the entire surface of the mountain. This will even out all the protrusions and recesses and further strengthen the structure.

For a more comfortable descent, the slide can be equipped with bumpers. They can be molded from wet snow. The edges of the sides should be as smooth as possible to avoid damage to clothing or body parts.

Use a hose to strengthen the slide

Another great option on how to fill the slide correctly is to use a hose with a spray nozzle for this purpose. This method is possible only if there is a water supply or a water column in the immediate vicinity. Water should be poured carefully, avoiding melting snow. Starting to apply water is from the top, gradually sinking down. This procedure must be done several times, then the question of how to properly fill the slide will be closed completely.

After a few hours, the wet snow should freeze completely. If this does not happen, it is worth waiting for time until it completely solidifies. After that, it's time to start riding. A flat and smooth surface of the descent is the key to a high sliding speed. A properly made slide can deliver a lot of pleasure, joy and positive emotions. If you follow these tips, there will no longer be a question of how to properly fill the hill.

When descending from the ice slides, you should be extremely careful in order to avoid injuring yourself and those around you. Riding young children should be carried out under the full supervision of adults in order to prevent injury and avoid possible accidents.

Winter brings not only cold, but also new entertainment and experiences. Sleigh rides, skiing and ice skating are available. In order to give joy to your children, and to have fun yourself, it is worth pouring a snow hill in the yard. Before you figure out how to properly fill a snow slide, you need to understand where it is best to organize it. The chosen place should be safe so that you can have fun and not worry about possible dangers. The selected area should be free of trees, shrubs, manholes, and other objects that could cause injury. There should be no road nearby.

How to fill a hill of snow with water - the dimensions of the hill, the angle of inclination

The height and width of the slide will depend on the free terrain, the amount of snow available, and your margin of opportunity. If the slide is made for crumbs, then you should not build too high a structure. Convenient indicators are a ratio of height to length of 1 to 4. In addition to the descent, you will need to roll out. This is a flat plane along which movement will be carried out until the rider stops completely. When creating a structure, do not make the descent excessively gentle or steep. At the beginning, the optimal angle of inclination is -30-50. Further, as you descend, reduce the angle of inclination, you need to do this as smoothly as possible.

How to build a hill

For the convenience of performing work, prepare large snow balls in advance. Lay out a wall from them, and fill the cavities between the balls with snow, use a shovel. Compact the resulting snow mass well. As a result, you can build a descent, railings and other elements. To make your slide convenient to use, do not forget about the steps. Optimal dimensions width - 40 cm. On the sides of the steps you can build low sides, it will be convenient to hold on to them when climbing the hill.

How to fill a hill with water

Once you've built the snow structure and tamped it down well, let it sit for a couple of days. During this time, the frame will be compressed and strengthened, which will allow it to be used until spring. It is better to fill it in the evening, when the sun sets and the temperature reaches -20C. If these conditions are not adhered to, the entire structure may “float”. Do not immediately pour water out of the bucket, first walk around the entire perimeter with a spray bottle. Wait a couple of hours and proceed to the main stage of pouring, do it slowly. Use slightly warm water. If voids form, immediately fill them with snow. When the slide hardens well, walk down the slope with a sanding board - this will make it slippery and smooth.

Using the information provided, you can easily build the coolest entertainment for your children. Show your imagination, work carefully and the result of your work will certainly please not only children, but also adults. Ice fun from the snow in your yard is an opportunity to have fun for the whole family without leaving your yard.