Front panels are one of actual types of facing of country houses, cottages and dachas. They have important functional purpose- prevention of heat loss and creation of natural ventilation. A wide variety of textures and shades allows you to create a unique style and unique look of the house. Among the most popular facade materials are basement siding, thermal panels, vinyl siding, fiber cement panels, WPC siding, porcelain stoneware, and glass panels.

Vinyl siding: the main advantage

The bevelled edges and the hidden lock connection allow you to create a single solid canvas on the facade without visible seams. This is attractive from an aesthetic point of view and is a guarantee of good sealing to protect against moisture and moisten the walls. The panels are made of polyvinyl chloride, which is resistant to temperature extremes -50 to +50°C and non-combustible. A choice of 100 shades of color palette and 50 relief structure options allows you to create any exterior design.

Facade panels "under the stone"

Facing in the form of natural stone attracts with its respectable appearance and the creation of an image of an aristocratic format. But not everyone can afford to buy such building materials. This is where vinyl siding comes to the rescue in imitation of malachite, marble and granite.

An important advantage over analogue

Vinyl siding can be mounted on any type of base - concrete surface, brick wall, wooden crate. Facing with natural stone cannot boast of such versatility.

Facade panels under the "tree"

Facade siding, imitating a wooden texture, is one of the most diverse in texture. This is a recreation in PVC: shipboard, wood chips, block house, logs, lining.

Facade panels "under the brick"

PVC brick cladding material perfectly imitates not only appearance but also the texture. This is expressed in the creation of a smooth, rough or chipped surface, which is difficult to distinguish from an analogue even by touch.

Disadvantages of vinyl siding

Vinyl panels do not withstand impacts applied purposefully with very high force - cracks and scratches appear. Products react to changes in temperature, especially to its sharp jumps. This is expressed in the appearance of wave-like deformation on the facades with improper installation. Professional craftsmen know these features and take them into account during installation, reliably adjusting the lock connection. That is why it is so important to find the right specialists for facade works.

Plinth PVC siding - protection of weak points of the facade

The lower part of the house, adjacent to the foundation, is always difficult to clad. Far from facade materials are suitable for this. Close proximity to groundwater and the blind area suggests that the lining should be as resistant to moisture as possible. Otherwise, the owners will have to make repairs every year. Avoiding such problems allows the use of plinth siding made of PVC.

The importance of purchasing basement siding

Even if you use other facing materials for the main part of the facade, it is advisable to buy special ones to decorate the basement. This will protect the building from freezing, prevent the walls from getting wet and the formation of ugly white stains on them.

Basement siding is made in the form of panels of small length for ease of installation. A possible difficulty during installation may be the adjustment of the lock connection. It is necessary to take into account the expansion or contraction of PVC panels with temperature differences within 5 mm.

Flaws

Facing material melts quickly during a fire, so it is recommended to use it only for low-rise construction. For decoration of buildings of a large area, it is contraindicated. The choice of siding in shades is limited - a very small palette of shades. Selection is required for the main view either according to the contrast principle, or according to the distant tone of the main palette.

WPC siding - eco-friendly finish

Wood-polymer composite siding is one of the new modern cladding materials. It is an imitation of timber or lining with original embossing. Production is based on: sawdust and other woodworking waste, thermoplastic polymers and modifying additives. Products are presented in the texture of a board, panel or terrace board.

Distinguishing properties

The wood-polymer composite has absorbed all the best features - an attractive look of wood texture and the strength of modern polymers. This means that the facade cladding will not delaminate, deform, become saturated with moisture and swell during operation.

Installation advantage

Compared to other facing materials, the installation of WPC siding is waste-free. Any parts can be cut and used.

Weaknesses of the KDP

The disadvantages of the facade material most often appear under certain weather conditions. Strong wind, raising streams of dust and small pebbles can cause harm in the form of small scratches on the surface.

Facade thermal panels - "warm" cladding

Warm panels - a warm house. It is on this principle that facade thermal panels are produced. This facing material is combined and simultaneously connects facing clinker tiles and insulation based on polyurethane or expanded polystyrene. His distinctive feature is waterproof. No moist environment is formed on the surface, which is a breeding ground for fungal plaque and vegetation on the facades.

Used for production the best varieties clay, which is fired at a temperature of +1200°C. Thus complete sintering is achieved. raw material, which gives thermal panels high characteristics of strength and resistance to mechanical stress. The use of insulation allows you to create good level thermal insulation of the house, without spending extra money on it.

Flaws can only appear after poor-quality installation.

Before installation, it is necessary to carefully align the walls, otherwise the thermal panels are deformed during operation.

Fiber cement panels

The production of fiber cement panels is carried out from cement, cellulose, quartz sand and mica by autoclave at a temperature of +175 ° C. Thus, a uniform, homogeneous, durable structure of the facade material is achieved. Paint or varnish is applied to the surface, visually displaying a smooth or rough texture brickwork.

Benefits of using

Fiber cement panels are one of the most durable types of facade cladding, which is confirmed by frost resistance of 100 cycles. The density of the material is 1.5 kg / cm3, resistance to mechanical stress, and the characteristics of the bending strength of 24 MPa create resistance to strong gusts of wind.

Flaws

Among the inconveniences of installation can be considered the mandatory use of power tools. Otherwise, the panels simply do not cut. Their weight up to 30 kg requires the work of a team of 5-6 people. The most important problem of use can be a water absorption rate of up to 10%. That is, the material tends to absorb moisture.

Porcelain stoneware - facing for centuries

Porcelain stoneware is identical to natural stone in its properties and characteristics. Its use is extensive - it is both low-rise construction and high-rise buildings. Porcelain stoneware cladding emphasizes status especially favorably, which is why it is often used for commercial real estate. An important factor in the choice is the possibility of installation at any time of the year, at sub-zero temperatures.

Most winning traits

Porcelain stoneware is chosen not only for the respectable appearance of houses, but also for the distinctive characteristics of wear resistance and lack of abrasion. The material stands out for its special resistance to the formation of cracks, scratches and chips on the surface. Even stains will appear on it is difficult. The original appearance and shade is preserved for decades thanks to UV resistance and absolute waterproofness.

Cons of application in price

Porcelain stoneware belongs to the premium class facing materials and has a high cost. Again, the large weight of the products requires strengthening the foundation, and this is again an additional cost.

Glass panels as an original type of facade glazing

Glass panels are used in facade glazing when filling structures made of aluminum or PVC. Products are relevant for both high-rise and low-rise buildings. The following types of glass are used as filling: thick, impact-resistant "mono" glass, laminated structures with a special film. It creates a darkening effect and reduces the visibility for passers-by. Double glass "triplex" is internally filled with inert argon gas to prevent breakage.

Advantages of purchasing glass panels

A large area of ​​glazing is an original type of facade cladding. Glass panels allow the sun's rays to penetrate as long as possible into the room. This contributes to energy savings.

Application features

Possible operating difficulties

When using glass panels, it is necessary to install blinds, blackout curtains or other window accessories to avoid scorching sunlight in the summer. Otherwise, overheating occurs and stuffiness is felt in the room. Maintenance also causes a lot of problems, since industrial climbers will have to be involved in washing the glasses.

What to look for when choosing facade panels

The variety of facade panels allows you to choose a facing material according to your taste, quality and price, create a unique home decoration by combining products, experimenting with shapes and color palettes. In order not to make a mistake and not buy a fake or defective products, pay attention to the following important components of the purchase of any material: a certificate of compliance with quality and safety standards, a manufacturer's warranty, an accompanying album of technical solutions or detailed instructions for installation. It is desirable that all facade panels can be purchased from one company along with accessories.

On our website.

As for the dimensions of this manufactured product for facing works, they are very diverse. These can be both small individual segments and large-sized panels with a height of three meters. The production of elongated narrow typesetting panels, sheet profiles and sandwich panels consisting of several layers is successfully practiced.

Benefits of using facade panels

It is natural that mass popularity has come to this decorative facing material due to its quality indicators and numerous advantages. Having decided to purchase facade panels, the developer simultaneously solves several problems, such as:

• protection of the outer walls of the building from weather, precipitation, sudden changes in temperature and the harmful effects of direct sunlight;
• resistance to corrosion, fungal infections and harmful insects;
• the possibility of carrying out installation work in any weather, high and low air temperatures. This allows you not to delay the construction schedule;
• facing buildings of old construction, and not just new buildings;
• imitation of expensive decorative building materials for a moderate price. The difference with stone, timber and brick is visible only when you are in close proximity to the facade.

To get to know the differences and advantages of the most popular facade panels, we suggest that you study the information about each of them separately by reading the article below.

Cladding facade panels: brand overview

Alta-profil

Alta-profil panels attract a huge number of customers due to the optimal combination of quality and price. At an affordable cost, the manufacturer has provided a wide range of panels with different colors. In addition, this lining corresponds to all quality indicators inherent in similar exterior finishing materials:

• she is not afraid of the aggressive effects of the environment and frequent changes in high and low temperatures, characteristic of our latitudes;
• it is able to withstand various chemicals deposited on the foundation;
• in the production of products, only non-toxic raw materials with an anti-flammable effect are used;
• delamination and fragility of panels caused by high humidity and heat are excluded.

Docker

The Docker brand panels, called "light stone", are an example of a combination of beauty and economy for facade finishing materials. For all their simplicity, they transform the facade of the building, making it visually similar to stone cladding. They are made of a special composition, the basis of which is polyvinyl chloride. This material is lightweight, which simplifies the process of mounting the cladding on the facade.

The full similarity of the textures of the Docker panels with brick and stone was achieved only thanks to a high-tech production process. The color scheme of the panels of this brand is identical to the shades of ceramic bricks, natural sandstone and other natural minerals. These panels can be successfully combined with each other and combined with other finishing materials, both artificial and made on the basis of natural components.

Fineber

Among the most famous and proven panels is the Fineber brand. Their range makes it possible to realize any design projects. The standard dimensions of such material correspond to the size of 1100x500mm. The texture of its front surface completely repeats the three main claddings: stone, brick or slate. Small segments of Fineber panels allow you to visually imitate classic brickwork. Traditionally, the facade, finished "under slate", looks airy and light. As for the imitation of stone, the similarity with a natural mineral allows you to endow the external walls of the house with nobility and grandeur.

If we talk about the technical and operational characteristics of Fineber facade panels, then the first place here is the high quality and long service life of the cladding. Even after two decades, they will not lose their appearance. All this became possible thanks to the use of unique technology in the production. In the process of creating the panels acquire a matte front surface that does not glare in the sunniest weather. In addition to standard panels, manufacturers offer various decorative inserts and accessories to accentuate individual facade elements.

wandestein

It is known that the plinth is subject to various risks, such as freezing, excessive moisture, loss of an attractive appearance due to fading in the sun. Poor-quality basement cladding during operation can crack due to temperature changes. In order not to encounter the above troubles, you need to carefully choose finishing material for the exterior finish of the plinth.

In addition to reliability and quality, Wandstein panels » will help to highlight and ennoble the base of the house, imitating masonry cladding. The main series of such materials are represented by the Tuf and Skol collections. In their production, the technique of automated staining is used. There are several parameters that distinguish such a cladding from steel analogues. in:

• the size of Wandstein products corresponds to the height of standard basement floors (59.5 cm);
• the use of a new locking joint, which rigidly and reliably fixes the elements of the cladding. Thanks to this innovation, installation work is carried out easier and faster;
• modernized horizontal connection of panels eliminates even the slightest deformation of the material;
• product design matches the appearance of natural stone;
• facade panels are made of components that meet the parameters environmental cleanliness and security. They are non-toxic and are accompanied by hygiene and fire certificates.

Vinylit

Vinylit panels are the most suitable facing material for the harsh climate of domestic latitudes. Their multilayer thermal insulation structure is based on polyvinyl chloride. Vinylit thermal panels perfectly cope with the function of thermal insulation: they guarantee optimal temperature regime and soundproofing inside the building. The popularity of this product is also facilitated by the variety of decorative coating options (texture, color, shades), providing the widest field for a riot of design fantasy.

Nichiha

This product consists of wood fiber, quartz components, mica cement and inorganic additives. It is produced in the form of a flat embossed tile, presented in different color and texture solutions, which allows it to imitate various finishing materials.

In the production of Nichiha trademark panels, no artificial components are used. The organic origin of the products allows the use of such material for interior cladding of the house, while guaranteeing long term service and environmental friendliness.

Acrylic coating is applied to the outer side of the panels in six layers. Inner side covered with facade paint with a water-repellent effect. The standard width of the material is 45.5 cm, length - 181.8 or 303 cm. Its thickness varies from 14 to 35 mm, and, depending on this indicator, an individual fastening is selected.

Nichiha fiber panels are characterized by a minimal tendency to expand and contract under the influence of high and low temperatures. The acrylic coating of the panels does not contribute to the retention of dust and dirt on the facade - during rain, dust and dirt are easily washed off with water in a natural way. With a high strength of the material, nails easily pass through it. In finished form, the facade has no visible joints and seams.

HPL

Facade composite material, of which the HPL panels are composed, has several layers. The thickness of the product is 1.5 cm, length - 40 cm, width - 13 cm. This cladding is ideal for finishing public buildings and structures due to its special strength and resistance to mechanical and thermal stress. Caring for it will not be difficult and will not require the use of special tools. Panels of this brand serve for a long time without the need to replace them.

Terracotta panels

This cladding material is an example of modern sustainable outdoor decors. It is completely non-flammable and can be used for mounting at any height. Terracotta panels have increased thermal and noise insulation performance, as well as very low thermal conductivity.

They are based on high quality clay, pressed under high pressure. The firing temperature reaches 1200 degrees. Such panels look most successful in combination with facades made of glass, stained-glass windows and decorative aluminum profiles. Production equipment for the production of terracotta panels is located in a number of European countries, in particular, in Portugal and Spain. Recently, Chinese manufacturers have also used such equipment.

PF panels

The flat surface of metal facade panels PF 1a does not contain decorative details. The walls of buildings lined with such material are distinguished by rigor and conciseness. The direction of their installation can be either horizontal or vertical. Most often, metal panels are used for facing bay windows, rounded ledges and openings.. This is what distinguishes them from straight metal siding.

Cement based panels

The main components of asbestos-cement panels are Portland cement and chrysotile asbestos. This material for finishing facades has a number of virtues, such as.

Modern facade panels are high-quality cladding, with which you can easily decorate the facade of any building. These products are presented on the market in the widest range, for example, KMEW facade panels, Konoshima facade panels, and other types of facade panels from domestic manufacturers, from Europe, Japan and China are very popular with owners.

Panels for facades can have different colors and various textures, thanks to which they can be used to implement various design projects in practice. In most cases, such products are used as an external facing layer of modern ventilated facade systems, necessary for protection against external negative impacts building structures of various objects and insulation layers.

Material features

Such facing materials can be made from the most different materials, for example, cement and metal products, polymer facade panels, polyurethane foam facade panels, molded facade panels, perforated facade panels and WPC facade panels have gained considerable popularity.

Between themselves, the cladding differs not only in the materials used in the production, but also in the dimensions of the finished sheets. For small private buildings, Nichiha facade panels of standard sizes are best suited.

Advantages of facing

Facing cement products from various manufacturers have unique sets of technical characteristics and advantages, however, for all modern products from Europe, Japan, China and from domestic manufacturers (Nailite facade panels, Dolomite facade panels), approximately the same positive qualities are characteristic. The table below lists the universal advantages for all panels on the market.

Advantages	Description
Wall protection.	All modern products made of metal, cement, wood fibers and other materials are produced using technologies and special additives that provide reliable protection of the walls of houses from any negative environmental influences - precipitation, sunlight, as evidenced by user reviews.
Persistence.	Methods of production and subsequent processing of Nylight panels and others provide products with high strength, protection against corrosion, temperature changes and long service life while maintaining all technical characteristics and visual features.
Easy installation.	To install a ventilated facade, no preparation of the walls of the house is required. Chania facade panels, Vox facade panels, Nichiha facade panels and others can be installed even on facades with minor irregularities and defects that will not affect the appearance and performance characteristics lining.
Versatility.	To choose high-quality products from China or Europe means to get the opportunity to install on any object, whether it is a new house or an old building. It is possible to install the front panels of Nailite and other manufacturers under various weather conditions and at any time of the year.
visual options.	VOX facade panels, Dolomite facade panels and others are made in a wide range of colors and textures, in recent years, according to reviews on the network, facing materials made as an imitation of the surface of natural materials - stone and wood - are in special demand.

Facade finishing Alta-profil

Alta-profile - products that are fairly cheap facade panels, which are widely used due to their cost. To choose such products means to improve the appearance of your own home. In addition, the owners appreciate technical features Alta profile products, as evidenced by numerous positive reviews.

Cement panels Alta-profile are resistant to any negative influences and have a long service life, they retain their specifications and visual appeal at any temperature.

In the manufacture of Alta profile cladding, only environmentally friendly, reliable materials are used. At the last stages of production, all Alta-profile products undergo additional processing with various protective compounds that provide resistance to corrosion and fire. Even with serious temperature differences, such a lining will not exfoliate and crack.

Finishing the house with Alta-profil slabs

Among other things, Alta-profile panels are equipped with special small bends next to the mounting holes. This is a simple but extremely effective lock that ensures that the Alta Profile finish is stable even in the strongest, gale-force winds.

In general, the use of Alta-profile panels is a great opportunity for all owners to finish the facade of their own house inexpensively and with high quality. Reviews on the network indicate that the popularity of Alta Profile is constantly increasing. This is due, of course, to the fact that this manufacturer creates facing materials that are ideally adapted to Russian climatic conditions. It is rather difficult to choose a more suitable cladding than Alta profile for use in Russia.

Dock r cladding

Docke R facade panels are a modern, reliable, cost-effective and durable option for facing the facade of a private house, with the help of which any object can be made visually attractive, distinguishing it from other buildings.

After analyzing customer reviews on the Internet, we can conclude that the most popular finish imitating the surface of natural stone. Facade panels Docke R under natural materials are made not from cement mortar, but from polyvinyl chloride.

Currently, Decker facade panels are presented on the market in the widest range. Such cladding can imitate the surface of various types of stone, and due to the possibility of combining different brands of finishes, the owner can create a truly unique design for his home.

Fineber finish

Facade panels Fineber are considered one of the leaders modern market finishing materials. Fine Bear is famous brand widely used in many European countries. Thanks to a huge selection of colors and textures, Fine Beer finishes can make your home truly unique and attractive.

Finishing the house with FineBer slabs

The most common product of the Fine Beer brand is the Fineber facade panel, which imitates the visual characteristics of brickwork, slates and natural stone.

Key Features

Fine Beer is a finish that has many positive qualities. It is quite difficult to single out the most significant among them. If we consider online customer reviews as an indicator of the importance of a particular characteristic, it becomes clear what features home owners value Fine Beer for.

First of all, Fine Beer is a great opportunity to create an attractive and unpretentious facade for your home. Facade panels Fineber are inexpensive, especially considering that they retain all their parameters for at least more than 20 years.

In the manufacture of Fine Beer, the most modern, advanced technologies are used, thanks to which the panels have a unique matte surface. Because of this, Fine Beer products will not shine in the sun, which could interfere with the attractiveness of the masonry design.

Fine Beer is perfect choice for economical owners who care about the style and attractiveness of their home. If you need to carry out stone cladding inexpensively and efficiently, then the best option than Fine Beer is simply not to be found.

Wandstein cladding

Wandstein facade panels from the well-known company Holzplast are high-quality facing materials that can maintain their technical characteristics over a long service life. The durability of Holzplast products is largely due to the excellent water-repellent properties of materials, because it is moisture that often causes premature failure of the cladding.

Finishing the house with Wandstein tiles

Wandstein facade panels from Holzplast are distinguished by a large selection of color and texture solutions. Holzplast products imitating the surface of stone and other natural materials are very popular with users.

Holzplast products have optimal dimensions for facing plinths and facades with your own hands. A height of 59.5 cm makes it possible to carry out such work without the participation of professional installation organizations. The simplicity and accessibility of Holzplast installation, as well as the weather resistance of the cladding, are largely ensured by modern interlocks that securely and simply fix the installed Holzplast plates.

Installed Holzplast brand cladding not only creates an attractive design for any home, it is completely environmentally friendly and safe for residents. Holzplast is perfect for those owners who care about environment and are interested in environmental issues. Holzplast manufactures finishing materials in accordance with all applicable European fire safety standards.

HPL finish

Facade cladding HPL is made on the basis of modern composite materials that provide the main characteristics of HPL panels and their visual and operational features.

HPL is a multilayer, reliable material that can reliably protect building structures from any negative external influences. Currently, HPL is used for cladding various buildings and structures. The most common HPL in the decoration of large public facilities - restaurants, offices, cafes.

Facade panels are today a very fashionable and already widely used method for renovating building facades. This material, due to its variety of shapes, colors and textures, is very successful in the construction of new, as well as the reconstruction of old buildings and structures.

The production of facade panels in terms of investment is quite an attractive direction, since high-quality products are quite expensive. However, the manufacturing process of such structures consists of several technological processes, which provide for the presence of a staff of workers with preliminary qualification training.

Advantage

Using facade panels for building cladding, the consumer receives:

• high level of sound and heat insulation;
• ease and simplicity of installation;
• the possibility of self-cleaning;
• resistance to moisture and low temperatures;
• environmental friendliness of all materials used;
• high level of seismic resistance;
• panel color quality;
• immunity to UV rays;
• long service life;
• relatively small weight of one facade sheet.

Types and forms

A variety of materials can be used in the production of facade panels: steel, aluminum, copper, wood fibers, zinc, glass, natural stone, etc.

These structures are available in various sizes: small-sized (sandwich panels, corrugated sheet, narrow typesetting panel, multilayer panels) and large-sized (height can reach 4 m). Depending on the material used, facade panels are classified into:

• plastic(do not corrode, resistant to ultraviolet radiation, able to imitate brick, wood, marble and other materials);

• vinyl(made of PVC (polyvinyl chloride polymers), have durability (up to 40 years of service); moisture-proof, fire-resistant, but do not withstand low temperatures and strong wind)

• stone effect panels(stone imitation is much cheaper than real masonry);

• wood fiber panels(these are wood fibers pressed at high temperature and pressure; the material is environmentally friendly, frost-resistant, bending resistant, not subject to deformation, easy to install);

• glass panels(there is a classification of glasses according to strength: class A, B and C; they have good sound and heat insulation, reduce the level of exposure to ultraviolet radiation, create an original facade);

• sandwich panels(the design consists of a layer of metal and a plastic plate; durable (more than 30 years), environmentally friendly, protect against heat loss);

• fiber cement panels(consist of cellulose and plastic (10%/90%), have a self-cleaning coating, withstand significant temperature changes; frost-resistant, non-flammable).

The production of facade panels can be manual and professional. In manual work, there is only manual equipment (mixer, tables, scales, drying racks), it can be organized in any small room (for example, in a garage).

Professional production is a whole range of equipment:

• mixers;
• pulp processing equipment;
• drying machines;
• molding equipment;
• pulp preparation equipment;
• various dispensers;
• equipment for the production of the panels themselves.

First, the cellulose goes through several stages of purification and preparation, after which it is mixed with cement, sand and synthetic additives. All this mass is fed into the mixer-extruder, where it is given shape and texture. After that, under the influence of thermal action, calcium silicate hydrate is formed, which provides strength and wear resistance to the product. At the very end, the panels are treated with antistatic and moisture-proof solutions.

Holzplast (Wandstien)

With the production of the Wandstien series, the developers of Holzplast were able to combine the design elegance of classic materials with the main advantages of modern polymer materials. Designs are made from frost-resistant, not cracking, water-repellent material.

Wandstien panels are represented by the Skol, Tuf, Brick, Parfir and Booth models, which are developed on the basis of natural raw materials:

• "Skol" combines a wide color scheme;
• "Tuff" is designed for lovers of majestic architecture;
• "Brick" repeats the texture of natural material;
• "Parfir" combines garnet and brown colors in an exquisite relief;
• "But" is a universal solution, both for individual architectural forms and for facing the entire facade.

Docke-R (Decke)

Cladding facade panels Deke (Germany) are excellent for decoration of entertainment and retail
complexes, baths and saunas, large buildings and structures. The plant where the panels are manufactured is equipped with the most modern equipment and the products are subject to high quality control.

There are three main models in the Döcke-R product collection:

• "Berg" under a brick (imitation of a natural brick);
• "Burg" under the stone (imitation of stone, processed by hand);
• "Stein" under sandstone (imitation of layered sandstone).

Read what is valued in basement deck siding.

FineBer panels are PVC products designed for finishing almost any facade. They are widely used for decorating the basement. In addition, it is very beneficial to emphasize doors, columns, windows, portals and other small structures with this material.

The FineBer product range includes several series that are most in demand among buyers:

• "Rock";
• "Brick", "Facing brick";
• "Stone", "Natural Stone", "Large Stone", "Wild Stone";
• "Slate".

You will find out what attracts FineBer facade panels under brick.

Alta Profile

Decorative facade panels made of PVC by Alfa-Profil are perfect solution for finishing the basement of the building. They do an excellent job with the snow that settles at the base of the building every winter.

Assortment of facade panels Alfa-Profile:

• "Clinker brick";
• "Rocky Stone";
• "Brick";
• "Canyon";
• "Granite";
• "Facade tiles";
• "Bassoon";
• "Bubble Stone".

The reasons why Alta Profile breaks sales records will be found in the article.

Nailite International, which was founded in Florida (USA) in 1978, is still one of the leaders in the production of facade panels. Her products can replicate natural materials with extraordinary realism, ranging from delicate pastels to amazingly vibrant tones.

Facing facade panels Nailite have the following classification:

• "Chopped cedar";
• "Stacked Stone Premium";
• "Cedar shingle";
• "Masonry";
• "Brickwork".

When choosing, you will find features of Nailite facade panels.

Installation of facade panels

The order of installation of facade panels is as follows:

1. Installing the crate.
2. Setting the initial profile.
3. Cut out the material.
4. Installation of facing panels.
5. Installation of external / internal corners and trim board.

Read detailed installation instructions.

Modern building technologies provide for the use of facade slabs as finishing materials for facing the outer surfaces of buildings and structures. Facade boards are widely used in new construction and renovation projects. The versatility of the design makes it possible to veneer high-rise buildings and one-story cottages with the same quality.

Facade slabs are made of different materials, have a wide range of colors, shape and method of fastening. For them, unique fasteners and parts are produced that provide the creation of a supporting frame, overlapping joints, adaptation to complex elements of the external structure of the building.

How do facade facing plates differ from facade panels or cassettes, according to the author, by the method of fastening. We attribute the front plate to the sheet fastening method. The sheet fastening method involves the use of flat sheets of a simple shape. There are two ways of fastening facing plates for the facade: hidden and visible. The visible method is intuitive, it is fastening the plate to the base with a rivet or self-tapping screw. The hidden method is much more complex and technologically advanced, but it does not leave a visible fastening from the outside. It is carried out using special anchor bolts of hidden fastening, sometimes they are called a collet-type anchor.

Benefits of using facade slabs:

• non-combustible sheet material;
• work can be carried out at any time of the year, regardless of the weather, and no special preparation of the walls is required;
• facade slabs can;
• fast and technological way of installation;
• reliable protection of the walls from atmospheric precipitation is provided;
• long service life and the possibility of replacing individual elements;
• a large selection of products, including those imitating natural materials.

The main types of plates for the facade of the house

Facade cladding can be carried out with large-sized panels comparable to the floor height, and small-sized ones, which are a set of typesetting parts of various shapes, fixed on the walls using a leveling frame and fasteners.

Finishing plates are classified according to the type of material from which they are made. There are several types of slabs for facade work: fiber cement, wood-plastic HPL-panel, metal, pressed slabs.

All finishing plates are suitable for, but some have a restriction on use in high-rise buildings. Not all types of plates have the necessary permits for use in high-rise construction. In the article, we will consider all the options and separately analyze each slab for the possibility of using it on the facades of public buildings.

Fiber cement cladding slabs

Fiber cement boards are made from a mixture of cellulose, cement, sand and synthetic additives. Heat treatment under high pressure gives the material high strength. . The back side is protected by a hydrophobic primer.

This finishing material can look like brick, natural stone or wood. The coating can be made of mineral chips. Does not absorb moisture, does not get dirty and does not burn. He has high strength. Most of the panels in this class have a low price, which contributes to their popularity.

Sheet panels are mounted in a visible and hidden way on the system. The visible method involves fastening the panel directly to the profile with a rivet or self-tapping screw. In this case, it is recommended to paint the visible fasteners in the color of the panel.

But not all front plates can be fixed with a rivet. For example, thin porcelain stoneware is not allowed, so it is mounted on a special aluminum frame assembled in advance, and the panel is pressed with planks until the adhesive composition adheres.

Often it is required to fix fiber cement, Rock-panel, HPL-panel in a hidden way so that there is no visible fastener. And in this case there is a solution. Facing plates are assembled on horizontal profiles. Previously, special hooks (agraphs) are attached to the plates on the reverse side with the help of hidden fastening anchors. For anchors, a non-through hole is drilled. The anchors themselves are untwisted like a “butterfly” furniture mount inside the hole. Thus, bursting its edges. Thus, the plate is securely held on the structure. Such a method is called hidden way fastening of front plates.

This article was an overview of the main facing materials for sheet fastening. More details on each type can be found in separate articles. Mounting methods will be discussed in detail with photographs in the next publications.