The most favorite place for children to play is a children's slide. Probably, only this entertainment helps to throw out all the extra energy, jump from the heart, and also give the baby an unforgettable vivid experience. The children's slide is a complex structure that resembles a whole play complex. Such structures can be found on city playgrounds. On the one hand, the slide has steps, on the other - a small descent. For safety reasons, slides are equipped with handrails and railings for lifting and lowering. As a rule, such structures are small in height and may have one or more slopes. If you have Vacation home, then you can buy a children's slide not only under the order, but also do it yourself.

It is important that the slide fits all safety standards. You can not install a slide near decorative electric lamps and trees, greenhouses, outbuildings etc. A shadow should fall on some part of the slide. It is not good for babies to stay in the sun for a long time. What is needed in order to create a children's slide? First, decide on place for construction, sketch out a drawing and diagram of both the slide as a whole and its individual parts.

The structure must be well secured. metal support or concrete. The details of the slide must be well sanded and varnished.

Supports, handrails and railings should be well fortified.

The size of the building should also be taken into account. It must be appropriate for the age of the child. For younger students, the height of the slide should reach no more than 3.5 meters.

Necessary tools and materials

To build a wooden children's slide with your own hands, you need the following: materials:

Tools to build a slide:

• A hammer
• Electric drill
• electric planer
• Electric saw or wood saw
• Roulette
• Angle cutting machine
• Drill

Work order

The children's slide is almost ready, it remains only to remove the protruding corners, screw and nail heads, carefully sand the boards and cover special protective varnish.

In addition to the slide, you can also install swings, horizontal bars, rings and other elements for children. Over time, it can be complicated by building a house, sports sectors, etc.

Do-it-yourself secrets of installing a children's slide

1. Grooves and slats when screeding parts form a strong and stable construction.
2. In order for the baluster to be firmly installed, the stairs can be additionally reinforced with planks.
3. Best for painting acrylic. These paints perfectly protect against negative influences.

Thanks to on one's own made design, the child, together with his peers and friends, will have fun and usefully spend time. Children's slide will give a lot of positive emotions.

In the yard country house or at personal plot giving the best entertainment for children will be a playground with a slide. You can make a children's slide with your own hands. The main thing is to know what materials, tools will be needed, to draw up a competent project plan. After all, there are many combinations: with a steep and sloping descent, with carved decorations, additional play areas, etc. This entertainment will appeal to children aged two to eight years.

Varieties of children's slides

Construction and children's stores offer a wide range of ready-made outdoor and indoor slides for children. Small structures are suitable for installation inside the house, if the height of the ceilings of the dwelling allows it. But bulky slopes are more suitable for the street. Each model has its own design features, as well as different materials of manufacture:

The last option is best for self-manufacturing and installations on suburban area or in the courtyard of a private house, due to the availability of material, the possibility of quick repair or replacement of broken parts. In order to repair or mount a wooden slide with your own hands, you do not need to call specialists, use welding, etc.

A set of necessary tools

To make a wooden slide for children in the country with your own hands, you will need a fairly large set of professional tools. Some tool is sure to be found in the garage or in the attic of every man, something will have to be bought or borrowed, for example, from a friend or neighbor. In order to make a children's slide out of wood you will need the following tools:

armed essential tool, you can start designing a future entertainment site and buying materials for making a ramp.

Create a project

Now on the Internet you can find a lot of ready-made drawings, diagrams, 3D projects, so you don’t have to “reinvent the wheel” on your own. Volumetric models with detailed instruction installation and a list of necessary materials will help create designs for children of all ages. They may differ in the material for the descent, the type of stairs, supporting structures, height, etc. When developing a project for a children's slide made of wood the following factors should be taken into account:

In addition, the dimensions of the structure are taken into account, which will help to correctly calculate the width of the slope, the angle of inclination of the trigger element. When making a wooden slide in the country with your own hands, you should take into account the opinion of the baby and his wishes.

Materials required for building

Of course, the size and quantity of materials that will be used to create supports, stiffeners, railings, upper railings, steps and other elements directly depends on the dimensions of a homemade wooden slide for children. These details are specified when choosing a project. play area. To understand what materials may be needed, as well as what the installation and construction process will be like, a children's slide project with a long slope of 3 meters and an upper platform of 50 * 50 cm is taken as an example.

List of building materials:

Additional building elements for fastening are galvanized self-tapping screws and anchors. If you need to ennoble the string of the stairs, then you should stock up on additional lumber.

Construction stages

The process of building a solid slide for children can be conditionally divided into several stages. This is preparation (of materials and installation sites), installation of playground supports, floors, manufacturing of ramps, stairs and safety structures. All these stages are important, poor-quality installation work can reduce the operational life of the entire structure, as well as reduce the safety of use.

Preparation of materials and place downhill

First of all, you need to take care of the quality of the wood. It must be well dried, this will help to avoid deformation of the bars during the operation of the slide.

This is followed by the stage of processing lumber with an electric planer, which will quickly get rid of wood knots and notches. After that, you need to sand the wood and round the chamfers. The lower part of the beams is treated with a moisture-resistant material that prevents the wood from rotting, for example, resin or waterproofing mastic.

After that, you can begin to prepare a place for a children's wooden slide. Land plot needs to be well levelled., and then mark the zones where the support elements will be installed. The depth of the holes in the corners of the square should be at least half a meter. The lower part of the recesses is covered with rubble and sand.

Installation of supports and floor

The support beams are securely installed in the prepared place, after which they are concreted. You can strengthen the structure with the help of a "bundle". To do this, small notches-grooves of 2 cm are made in the racks, a planed board is inserted into them, connecting the supporting elements to each other. Large screws or self-tapping screws are used as fasteners.

After the supports are installed, it's time to start installing the floor of the top deck of the slide. Wooden blocks of stiffening ribs are laid parallel to each other, followed by laying floor boards. It is worth taking care in advance that rainwater does not accumulate on the site; for this, a small gap (5-7 millimeters) is left between the boards.

Escapement manufacturing

If a factory-made plastic slope is used in the construction of a slide for children, then its installation will not take much time, just screw it to the finished structure. When using lumber, floorboards are fastened together, and wooden railings are mounted along them.

The floor of the upper platform is attached to the slope in several ways: by forming an acute angle (the optimal slope is 45 °) or cutting grooves. Important point , this is a stripping of wood that forms a slope, it must be perfectly smooth. After grinding, the surface of the slope is coated with varnish or special paint.

Other materials can be chosen for the manufacture of the slope, for example, a slippery plastic sheet, galvanized steel, durable plywood, thick linoleum. Any of this material is superimposed on the tree slope, which improves the sliding process during the child's slide down the hill. To reduce the risk of injury for a children's slide, any irregularities, attachment points for self-tapping screws are ground and coated with special paints.

Installation of stairs and railings

The landing of a wooden slide, built by one's own hands, should consist of at least a few steps. The type of construction is selected individually, the ladder can be installed on a kosour or bowstring. How younger child, for which yard entertainment is being made, the smaller the march of steps should be. After that, you can proceed to fixing the fences, the dimensions and height of which directly depend on the dimensions of the structure and the age of the children.

After installing a children's wooden slide, it is recommended to take care of the safety of children who will ride on it. It is necessary to equip the landing zone, ennobling this place with a sand embankment or a soft sports mat. In advance, you need to take care of cleaning the space from thorny bushes, stones, pipes, etc. Periodic checks of the structure for dried out boards, especially after winter, will help to avoid unwanted childhood injuries. Such a slide goes well with other game elements made by with my own hands such as benches and sandboxes.

Winters in Russia are getting warmer every year, and therefore the question is very relevant - how to ensure the sliding of tubings, cheesecakes, snowboards or skis in a thaw or even in warm weather in summer? For athletes, it's a matter of staying in shape, and for ordinary people question of holding active rest in sports mode and, of course, entertainment for children.

brush slide cover for slides SnowPlast (SnowPlast) art. 150243, made of synthetic modules, will undoubtedly be the ideal solution here. In winter, the brush cover retains snow on the slope, reduces the thickness of the snow cover required for skiing, saves money on snowing the slopes, allows you to open the winter season early, and protects sports equipment from damage during the thaw period. In summer, brush coatings do not spoil appearance green lawn and allow you to fully engage in winter sports and outdoor activities in summer conditions.

The use of a special silicone-based slip fluid improves the sliding properties of the coating, as well as its service life. For slides and tubing tracks, the recommended volumes of such a liquid are, on average, about 10 liters per hundred square meters coverage area per year. The brush cells fit together easily and can be used to cover wooden slides, tubing slopes and ski slopes. Sections can be joined together to form any geometric shape. Therefore, the shape of the slope of the slide, skating rink or ground cover does not matter.

In application, the coating is very convenient, as it is easy to mount and dismantle. The coating array is made up of small, similar, easily interchangeable plastic modules, size 150x300 mm. and with a bristle height of 40 mm. By connecting the modules together, you can pave a path or slope surface of any complexity. The coating does not violate the ecology of the slope and its design, does not spoil the fertile soil layer. Can be laid on any substrate, such as earth, concrete or wooden decking.

During the entire service life, the brush coating allows the management of entertainment centers, sports clubs and even resorts to extend the skiing season as much as they want, in fact, to offer their customers year-round winter sports. The Pleten company uses SnowPlast to be able to ride down a wooden slide or ramp all 365 days a year, regardless of the weather and temperature indoors or outdoors. Moreover, SnowPlast makes it possible to arrange slides in the warm rooms of entertainment game centers and children's parks.

Price synthetic turf for slopes and slides SnowPlast, art. 150243 = 3900 rubles/m2

Installation supervision for the installation of the coating = from 600 rubles / m2
(depending on the total coverage area and the location of the object).
A mixture to improve slip = 1400 rubles / l.
Special tubings for SnowPlast coating = from 5300 rubles/pc.

To entertain and entertain the kids in the backyard, while the parents are busy with their "adult" affairs, you can install a swing, a sandbox and a slide. Construction of a wooden slide for home or giving is quite simple and does not require expensive materials. Today we'll talk about how to make a slide for children with your own hands.

Do-it-yourself slide for children: drawing

To calculate the amount required material First of all, prepare a design plan. You can draw a layout yourself or take a ready-made drawing from any source as a basis, adjusting the dimensions to your requirements.

When designing your own layout take into account the following points:

• age of the child: for children from 1.5 to 4 years old, the height of the slide should be no more than 1.5 m; from 4 to 11 years - from 2 to 4 m;
• the optimal length of the slide can be calculated by the formula: “height of the slide x 2”;
• the slope of the slide should be within 40-55 degrees;
• the height of the steps and handrails is calculated depending on the height of the children;
• it is necessary to provide protective bumpers, the height of which on the launch pad should be at least 60 cm, on the descent - about 20 cm.

How to draw yourself scheme? You can create your drawing based on these a photo:

Do-it-yourself wooden slide for children: manufacturing steps

Preparatory stage

First of all, based on the drawing, the required amount of basic material is purchased - boards, bars; auxiliary material - self-tapping screws, varnish for woodworking, paint. It is also necessary to prepare tools - a saw, a hammer, a screwdriver, a drill, a tape measure, a level, a planer.

IMPORTANT! Particular attention must be paid to wood - it must be dry, without visible defects. It is preferable to use wood coniferous trees. As fasteners, it is advisable to use not nails, but self-tapping screws, bolts, screws, since nails can come out during operation and cause injury .

Preparation of materials

• First thing, sawing all parts of wood, according to the drawing.
• Then everything wooden parts must be freed from knots and chipping and carefully sand to remove all defects.
• To avoid decay, the bottom of the supporting pillars is processed resin, mastic for waterproofing, shale or anthracene oil, oily antiseptic.

Site and foundation preparation

The place where the slide will be installed must be carefully leveled, and the positions of the support posts should be marked with a tape measure.

If you decide to put a slide not at home, but in a summer cottage, follow the following instructions. With a garden drill dig holes, about 60 cm deep, which will make the entire structure more resistant to weather conditions - freezing of the soil during severe frosts and soaking it during periods of rain.

In the resulting wells insert poles, leveling them with a level and pouring concrete.

IMPORTANT! Z the descent must be soft enough - covered with sand, or artificial grass, rubber mat, to avoid injury at the end of the descent.

Assembling a wooden structure

• in installed supports cut grooves. Their width should correspond to the width of the board that the frame will consist of, and the depth should be about 2-3 cm;
• a board is inserted into the grooves and the rack is pulled together with self-tapping screws;
• at the upper ends of the support pillars, transverse bars are screwed on both sides, which will serve as the railing of the launch pad;
• two bars are screwed to the supports, to which the ladder and descent will be attached;
• on top of these bars the floor of the descent platform is being laid. Small gaps (2-3 mm) should be left between the boards to ensure the flow of rainwater and melted snow;
• mounted ladder: the edges of two boards are cut at an angle of 45 degrees, screwed to the transverse beam of the launch pad. Between themselves, these boards are fixed with the help of steps. The optimal step between the steps is 25-35 cm. Next, balusters are installed, to which the railings are attached;
• mounted descent: the edges of two boards are sawn off at an angle of 45 degrees, screwed to the transverse bar of the descent platform opposite the ladder. Between themselves, these boards are fixed with the help of several transverse bars, fixed with self-tapping screws. Plywood or long boards are laid on top of the transverse bars, which will be the descent.

Final stage

After assembling the slide, it is necessary to carefully examine all the places of the fasteners, check that all the hats are recessed into the wood.

Nothing gives a child as much joy as skiing. So why not put this play structure in your summer cottage so that the children can climb it when they want? Of course, it is easier to buy than to make. But there is no guarantee that manufacturers use high-quality materials for the manufacture of slides and do not violate technology. Parents who think about the safety of their children take on the construction themselves.

Which slide to choose - metal or wood?

The production of slides mainly takes wood and metal. The selected material affects the manufacturing technology, because any building material has its own characteristics.

Wooden slides in the classic version are built with an upper platform in the form of a house and comfortable steps. All parts of such slides are connected using fasteners. Every detail must be polished so that the child does not get hurt. It is important that all boards used in the construction are even and dry.

Metal slides usually look simpler: a small platform, a ladder made of pipes and a ramp. Supports for these elements of the structure are usually poured with concrete. Metal slides are most often painted.

Only those who know how to handle a welding machine can undertake the creation of a metal slide. Alloy metal parts it is impossible without welding skills - in inexperienced hands, the material heated by welding will bend and become unsuitable for construction.

A table indicating the pros and cons of using metal and wood in the construction of a slide will help you make a choice in favor of one or another material:

With the listed disadvantages of wooden slides, you can fight if you periodically cover the wooden parts of the slide with special protective equipment and varnish.

The choice is yours. But manufacturers offer to purchase slides, some parts of which are made of metal, while others are made of wood. Thanks to the combination different materials, the game design seems more interesting.

Ideas for creating slides

creative design wooden slide Wooden slide under the roof Wooden slide with metal ramp
Wooden slide with a large platform and stairs on both sides Metal slide under the roof Low metal slide for younger children
Simple metal slide This building has a simple wooden slope Thanks to the curved bars, this slide looks unusual

Step-by-step production of a wooden slide

Any construction begins with the execution of drawings. They will tell you what materials, in what size, will be required, and most importantly, they will give a clear idea of ​​the scale of the work. These drawings should reflect the dimensions of the base, descent and stairs of the structure.

A simple wooden slide with a long slope

The height of this structure is 3 meters, the length of the slope is 6 meters. The site is located at a distance of 2 meters from the ground. The length of the handrails, which are attached to the structure on the sides of the descent, depends on these figures.

But if a wooden slide is being built for a child under 4 years old, then you need to sketch on paper a drawing of a small structure with a short slope and a ladder of a couple of steps.

From the tools you will need to arm yourself with a drill, saw, screwdriver and shovel. At the very beginning of the work, you will need a skin, and upon completion, a stain and a coloring emulsion. Instead of paint, you can use wood varnish.

Necessary materials

To build a wooden slide, you need to purchase the following materials:

• 8 boards;
• 4 thick beams with a length of 0.6 meters and one 2 times thinner with a length of 0.8 m;
• Several sheets of plywood;
• 2 round profiles made of wood.

Instruction

1. The process of building a slide should be started by cutting all the wooden elements, while being guided by the drawing. Bars and boards need to be sanded with sandpaper, and then round the sharp corners;
2. Now it's time to make markings on the ground and drill holes in the ground to hoist the bases of the bars into them. The bars will not budge during the operation of the slide, if their foot is poured with concrete;
3. Taking the saw, you need to create notches at the top of the racks. They are needed to fix planed boards. Supports must be attached to each other with self-tapping screws. The design will become reliable after transverse bars or, in other words, sides are attached to it, preventing the child from falling down the hill;
4. To an almost finished structure, two bars can be screwed onto self-tapping screws, to which a ladder and a slope are attached. After that, on a small platform of the slide, you can lay floorboards and fix them with self-tapping screws. It is advisable to lay floorboards at a short distance from each other. Thanks to the gaps of only a few mm, the wooden floor will dry out well if it gets wet with rain or snow;
5. Then you can make the sidewalls for the stairs. To do this, the edges of the two boards must be cut down, placing the saw at an angle of 45 degrees. These boards are attached to the racks, and then smaller boards - steps - are fixed to them;
6. The gap between the steps must be calculated in advance. Due to the large or too small distance, it will be difficult for children to climb up. Comfortable step for climbing stairs - 35 cm +/- 5 cm;
7. The ramp is initially created in the same way as a staircase, but instead of boards, sheets of plywood are placed on the sidewalls tightly pushed against each other. On the reverse side they are fixed wooden slats with screws;
8. Lastly, the structure is varnished or painted with emulsion. Wood and plywood must be processed, otherwise they will deteriorate under the influence of moisture, thereby reducing the life of the slide.

Step-by-step instructions for creating a children's metal slide

Preparation: drawings and tools

One of the main tasks is to make a drawing of the future building for children's games.

This slide is for older kids.

To work with metal you will need welding machine and pipe bender. The parts bent by him are needed to create a railing on the top platform of the slide. Although for the manufacture of a simple metal slide, you can do without them.

List of materials

To make a simple metal slide, you will need:

1. Galvanized sheets or stainless iron;
2. metal square profile pipes;
3. Metal round pipes;
4. Special corners.

For the manufacture of slides, metal with a thickness of 3 mm should be chosen. A suitable size for square profiles is 3x50x50 mm and 2x25x50 mm.

Stages of work

• First you need to put four metal profile pipes into the holes dug in the ground. Then you need to weld a smaller pipe to their tops, which will serve as a support for the base of the site. Following it, handrails and stiffeners must be attached to the structure by welding;

Railings are an indispensable element of a metal slide that insures children from accidental falls. There should be no jumper racks on them.

• The next step is welding guides for the future ladder and ramp to the construction. Later, metal sheets are attached to the base of the platform and the sliding surface by welding;
• Now it is necessary to weld short profile pipes to the guides of the stairs, which will become steps. The second and subsequent pipes must be welded every 17.5 cm. With such a gap, the child can easily release the leg stuck between the steps during the game;
• It remains to add handrails to the stairs, closing the distance from them to the guides with metal sheets. All available corners must be rounded to avoid injury to the child. The protruding edges of the pipes can be "closed" with hemispherical plugs.

Video instruction

Thus, the main advantage of a wooden slide is ease of manufacture, and metal structures are durability. To create a wooden play structure, you will need to sand, saw and screw the boards. The installation of a metal slide is based on the use of a welding machine.