Ceiling tiles diagonally. How to glue ceiling tiles: different ways

There are many ways to install tiles on various surfaces. Most often, the standard direct method is used, when each element is installed behind the other, forming a straight line. But there are other ways that are slightly different in the process of work, but the result becomes radically different. Today we will tell you about the method by which you can make a completely different coating pattern on the surface of the ceiling. There is specifically, then we will tell you how to glue ceiling tiles diagonally so that you can diversify your knowledge in the field of repair and installation of tiles, and the room had a ceiling beautifully covered with tiles of your choice.

What is this article about

How is this method different?

Many will ask themselves the question, why learn a new installation method, if you can lay the tiles in the same way as before. Unless you are a master who has been working with this material for a long time, then you are unlikely to be able to answer this question, but the answer is very simple. There are a lot of laying methods that simply allow you to diversify the pattern of the coating, and somewhere it is even more appropriate to use a certain way of laying tiles.

Sticking a ceiling tile diagonally will allow you to make a very beautiful ceiling covering. It is worth noting that this way great for use on the surface of the ceiling, as it makes it possible to make a beautiful coating that will be easy to perform even complete newbie. On the ceiling, light types of materials are most often used, since they can very easily fall off from there. To mount heavy ceramics on the ceiling, you need to use additional glue, which results in quite high costs.

A sufficient number of people working with this material know how to glue ceiling tiles. But not everyone knows what the difference is between these installation options. If in the standard way each tile is installed directly behind the next one, then this changes the angle of installation of each element. For a typical element of a square shape, the corners are directed towards the corner of the room, if it is also square or rectangular, in this case they are directed towards the walls of the room.

Do not worry that you will have to perform a lot of new actions and incomprehensible instructions. This is a very easy option to make an unusual coating - to glue the tiles on the ceiling diagonally. You will only need to slightly rotate each element of the coating in order to complete the required geometric pattern. But also do not think that everything is so simple here. There are some nuances that need to be taken into account when working, otherwise you can end up with very crooked lines that can spoil the impression of all the work done.

The changes that this method gives

Of course, this is a completely different geometry of the arrangement of elements, which allows you to achieve new impressions from creating a ceiling covering. For this installation option, you need to know how to glue the tiles on the ceiling correctly, while not deviating from the intended pattern. It is necessary to completely change the angle of work in the literal sense.

In most rooms where tiles are used as ceiling tiles, the elements are laid out in straight lines that look very dull and uninteresting. We want to teach our readers such a simple, but very original way to stick tiles.

The most important change, as you already understood, is the change in the angle of placement of the covering elements. but the technology, quite interestingly, remains virtually the same as in standard mounting methods. Sticking will still take place directly, but the pattern on the surface of the ceiling as a result will be completely different. In addition, this method requires very accurate marking, since the result and quality of the work performed to create the coating will depend on it. If you are not good at doing markup or you don’t like to do it at all, then it’s better to try other installation options that will be less demanding for this stage of work.

Where to start?

You, of course, need to prepare all the materials and tools that will be needed in order to perform a diagonal tile installation. From the tools you need a standard set:

One or more spatulas, for all procedures for applying glue and other compounds to the work surface.
Sponge, rag, so that you can immediately wipe off the parts of the mixture that have fallen on the coating elements or a clean surface.
All the necessary measuring devices so that you can make an accurate and high-quality marking of the surface where the coating will be created. Of the standard ones, this is a tape measure, a ruler, a level (preferably a laser one).
To securely glue the material, you need to use a suitable quality adhesive and additional compounds, such as an antifungal agent, water-repellent impregnations and, of course, a deep penetration primer.
You will also need to use a knife with which you will adjust the elements to the required size for each room. It is usually used in the very final stage of work, when all the elements that can be used intact are installed.

When you have all this set of tools and materials, you can begin to prepare the surface of the ceiling. Anyone who knows how to properly glue ceiling tiles will start by cleaning the work surface of all dirt and stains that are on it. If this is a new surface, that is, nothing has been applied to it before, then you can simply remove the dust and treat it with the necessary impregnating agents. Otherwise, it will be necessary to remove the old coating if it interferes with the creation quality coverage their tiles. Remove layers of plaster if they have already begun to crack or even fall off. Then clean the surface of all stains using special products.

Then you need to clean it from all the rest of the debris and what could interfere with the work. When the ceiling is clean, antifungal agents can be applied to it. Wait for them to dry. Then apply a primer, which will create a layer on the surface that does not allow moisture to pass into the deeper layers of the ceiling. In addition, the primer will increase the adhesion of the adhesive to the base, which will have a positive effect on the reliability of the coating.

It happens that the ceiling is very curved, in this case it will be necessary to apply putty or glue-putty. It will be possible to immediately install a coating on the latter, but you need to do this very quickly, since it dries faster than a simple putty. You can also use a drywall frame, which will allow you not only to level the surface, but also to hide some communications in yourself. But it will only be effective if you install it correctly, so it is better for beginners not to use drywall.

Mounting

If you are wondering how to stick tiles so that they stay there for a very long time, then just read about it below. You will need, when you have carefully prepared the surface of the base, dilute adhesive composition in such a way that it is enough for 25-35 minutes of work, since it is after such a period of time that it will become weathered and harden, due to which it will lose its previous adhesive properties.

The mixture must first be applied with an even spatula, pressing strongly against the ceiling so that it does not fall. Then you need to go over the layer of glue with a notched trowel, creating grooves. The glue must be applied in a thin layer on the surface of the ceiling, and then, in a thicker layer, on the back of the element.

It may also be useful for you to know that there is a diagram on how to glue the ceiling tiles diagonally, thanks to which you can create this coating very simply and in a short period of time.

First you will need to determine the middle of the ceiling, mark it. Then you need to install the first tile element there so that its corners are directed towards the walls of the room (we assume that it will be square or rectangular). Next, it is necessary, focusing on the glued element, to draw perpendicular lines from the tiles to the walls from the middle. Then we fill in the gaps with whole elements in a similar way, and fill the rest of the space with elements fitted with a knife. The main thing is to correctly place the first element.

It is most appropriate to stick the ceiling tiles diagonally in a spacious room. In small rooms, such as bathrooms, kitchens, corridors, it is more convenient to glue the tiles in a standard way - parallel to the walls. In both cases, the main difference between editing is in the markup.

How to properly prepare the base for finishing

Any ceiling finish begins with the preparation of the base. In the case of installing tiles in a diagonal way, the preparation scheme includes two main stages. At the first, the surface is cleaned of a layer of old finish with a spatula or grinder. On the second - the ceiling is primed in two layers with a break for drying between them for several hours.

The cleaned ceiling with layers of soil mixture applied to it is marked out in accordance with the chosen method of tile installation.

Correct marking for diagonal mounting

It is important to understand that the ceiling will be aesthetic only if the tiles are not glued from corner to corner, but at an angle of 45 degrees relative to the surface of the walls. Start marking from the central part of the base, at each stage, the results are verified for accuracy.

The marking of the corner can be carried out in several ways.

The first option is to draw four lines from the central point towards the corners of the room. Each of the resulting angles is divided into two, thus achieving the formation of sharp corners of 45 degrees. The resulting lines will become a guideline for the correct pasting of tiles on the ceiling during installation.
Option two - after determining the center of the ceiling, two transverse lines are drawn that unite the centers of opposite walls. To maintain accuracy in marking, the masters recommend using a paint cord.

Installation of ceiling tiles - stages and subtleties

Correctly glue the tiles on the ceiling from the center of the base or from the chandelier. Each tile is smeared with glue around the perimeter, adding a drop in the center. Mount the products in the following order:

The first plate is fixed in the center so that the corners are in contact with the markings.
Mount three more plates according to the same principle.
The glued plates are pressed tightly to the surface and held for 15 seconds.
Moving along the center lines, the rest of the tiles are attached towards the edges of the base.
Near the walls, solid tiles are cut in such a way as to mount a complete canvas.

In order for the ceiling tiles to be laid correctly, it is necessary to separately calculate the number of elements, taking into account the area of \u200b\u200bthe ceiling and its geometry. Corner tiles are best cut with a sharp knife. So that the aesthetics of the coating is not disturbed by the remnants of the glue, it is removed, preventing it from solidifying with a clean napkin. To fill the voids between the walls and the finishing cloth, you can use one tile several times, cutting out parts of the desired size from it.

Confirmation of the correct markup, made diagonally with the start of work from the center, will be absolutely identical parts on opposite sides of the ceiling near the walls.

Diagonal layout from a chandelier: how to do it right

As an option, it is worth considering the markings from the chandelier on the ceiling, even when it is not clearly located in the center. It is most convenient to perform work according to the video scheme, strictly following the instructions.

The algorithm for performing work will look like this:

A rectangle is drawn on the base, designating its center with the help of intersecting diagonals. It is important that the center of the outlined rectangle coincides with the center of the chandelier on the ceiling.
From the central point of the indicated rectangle, work begins, planning the placement of the first four plates so that the edges are parallel to the diagonals of the rectangle, and the upper parts are shifted to the fixation zone of the chandelier.
To achieve perfect symmetry, the corners of the first four plates fixed in the central part are cut with a sharp knife. The more complex the configuration of the chandelier, the more likely it is that the elements will need to be adjusted.
The cut edges of the products are masked by a chandelier or decorative elements.
The rest of the tiles are glued, fitting each subsequent one along the side of the previous one.

In conclusion, it remains to be noted that in order to give a finished look to the canvas of ceiling tiles laid in a diagonal way, a ceiling plinth is necessarily used. Mount it by analogy with the main products - on glue. The wider the plinth, the easier it will be to mask flaws in the process of work with it.

The final stage is the removal of adhesive residues and traces of markings from the surface of the finished tiled ceiling. It does not hurt to make sure that each element is firmly fastened in order to quickly correct the situation if necessary.

If we talk about the repair of ceilings in general, then at the moment you can find a large number of materials that will make the ceiling beautiful and unusual. All you need to do is to approach this process in the right way. And ceiling tiles were able to gain particular popularity among the list of those materials that can be purchased today.

This is really one of the best finishing materials of our time, which was able to gain particular popularity among consumers in the modern world. After all, it is often used to decorate the interior of certain premises, this includes not only living quarters, as many people think, but also bathrooms.

Such a tile is not only attractive, it is also famous for its simple installation, which means only one thing, that each owner of his premises will be able to install it, thereby doing the job efficiently and competently. You can glue such a product from the center of ceilings or walls.

Varieties

Today, the industry uses three methods for the production of such a product. These include: pressing method, high temperature method and stamping method.

Pressed tiles

This tile is popular, its color is white. She is able to decorate the interior of any room, making it elegant and attractive.

Many owners of their apartments and houses actively prefer it, so if you decide to use it for your home, then perhaps you are making the right decision.

Injection tiles

This type of tile is no less popular, it is famous for its simple processing, regular geometric shapes, etc. Extruded This tile is no less popular in modern world. And this has a number of advantages.

First of all, I would like to note that such a tile is quite durable, which is one of its important advantages.

It is famous for its long service life, which is also considered to be a special advantage.

In order to be able to make colored tiles, it is customary to use a colored film.

It all comes down to the fact that you have the right to create, for example, an imitation of wood, or marble, and the interior of a particular room immediately changes in better side. How to choose ceiling tiles

If you decide to significantly save on the repair process, and want to purchase a budget version of the tile, then you should give preference to pressed tiles, since its price is much lower than all analogues. Therefore, this option will be a good solution for you, but it is made using a different technology.

If you have a desire to paint the plates, then you can do it without any problems.

To do this, you can use either acrylic or water-based paint.

But at the same time, you need to understand that such tiles are not suitable for finishing in the bathroom. Therefore, you need to do everything necessary to make the right choice.

In order to create a seamless ceiling, you need to use injection tiles, which have a deep pattern. On such a tile, you can just as easily apply paint. Speaking about the disadvantage, I would like to note that the high cost is considered to be the only drawback of the material, so it's up to you to decide whether to give preference to it.
Many people use extruded tiles as they are just as unique and popular in today's world. At the same time, I would like to note that such tiles can be safely used in the kitchen and in the bathroom. The surface of such products is famous for the fact that it can be easily washed with warm water, adding ordinary detergents.

So you will definitely not encounter any difficulties, so it all depends on you.

Advantages and disadvantages of ceiling tiles - The cost of the material of such products is much lower than other modern types of finishes, which is why they are in demand.

It is impossible not to note the small weight, the size of the ceiling tiles, and this is one of the main advantages during transportation.
In addition to all this, I would like to note that the tiles are also famous for their unique sound insulation, which is impossible not to appreciate.
Using such a finishing material, you will be convinced that they can not only favorably and beautifully affect the interior of the room as a whole, but also hide all existing ceiling defects, so that the preparation of the base ceiling is greatly simplified.
The most interesting thing is that you can install such tiles on certain types of ceilings, there are no restrictions here, so this advantage cannot be underestimated.

But there are also disadvantages that you also need to be aware of.

In the event that the tile is not painted, then as soon as you begin to take care of it, then some difficulties begin to arise, you will not be able to easily remove the dust.
When choosing styrofoam tiles, you need to be prepared for the fact that it can be easily damaged, and this usually happens when it is installed. New furniture or undergoing cosmetic repairs.
Always pay attention to the geometric shapes of the products so that they are correct, as this point is the most important.
The corners must be straight, the product must also have smooth edges that do not have rounding.

Tip: The quality of the product can be easily checked, to do this, take the tile by the corner and lightly shake it off. If you hold a product of poor quality in your hands, it will begin to break, and this leads to the fact that there are violations of production technology.

You must understand that such a product cannot be given preference, they are trying to sell you a fake.

Installation of tiles on the ceiling

First of all, you need to buy everything necessary tools to carry out this work. This is not difficult to do, because there are a large number of hardware stores today.

Having prepared all the tools, you can begin to perform this work without any difficulties and problems.

You need to start with the fact that you need to carefully prepare the surface.

The most interesting thing is that to carry out this work, you do not need to purchase expensive tools, although many do not think so, so they immediately abandon the idea of gluing ceiling tiles in their apartment.

In the event that you are sure that the surface of your ceiling does not have any defects, then surface preparation will generally be quick and high-quality, because all you need to do is clean the worn finish and the problem will be solved.

Any paint that has begun to flake off should be removed so that you do not run into problems in the future.

In this case, cracks and seams must be repaired with putty.
You can level the ceiling using reinforcing tape, just as great solution gypsum mortar will also become.

As soon as the ceiling is cleaned of dust, it must be thoroughly degreased, and then carefully coated with a primer. Next, I would like to tell you about how to properly glue the tiles on the ceiling, and what you need to know for this.

Ceiling markings

In order for your tile to lay flat, you need to apply markings from the center of the ceiling, from where, as you know, it is customary to draw four lines to the corners of the room. it important point, so try to do everything correctly and competently.

Now each sector will need to be divided in half, thereby observing an angle of 45 degrees.

And as soon as you begin to lay the material, then know that your markup can become the main guideline, so be guided by it.

Tip: When starting to choose tiles, you must first of all proceed from the size of the rooms, and also, do not forget about the laying technology. Only in this way will you be able to pick up a great tile option that can amaze you.

How to properly tile?

Speaking about the non-standard installation method, then, as practice shows, in the modern world, it is customary to use it not as often as it seems.

You can learn from professionals about how to properly glue tiles on the ceiling, as they are highly qualified and experienced in this work, which means they will definitely help you solve this problem.

You need to start installing the tiles from the center of the room, and as for the tiles of the extreme row, they must be cut.
First of all, as experts advise, you must stick four tiles, glue must be applied at the same time, along the edges, as well as in the center of the plate. We must not forget about the three-minute exposure when you begin to press the product to the ceiling. And after a few seconds, you can enjoy how the tile has stuck to the base.
Speaking of the rest of the tiles, you should know that they are usually glued end-to-end with the first four products. In order to start cutting the extreme products, you will need to use a sharp knife and a cutter, probably every man has these tools in his assortment.

If we talk about the ideal option, then know that here you will need to cut each tile diagonally, as a result, you can get two halves, they, in turn, are tightly attached to the wall by the cut point.

Now you yourself have noticed that you can lay a product of this type diagonally with particular ease if you follow our recommendations and advice, which means that after a while you will be amazed by the beautiful and unique interior.

All this means that now the atmosphere of each room will be perfect, cozy and unique, which will positively affect every person who knows what beauty and sophistication are. Such a tile is able to create a special atmosphere in the room, and it will positively influence the mood of each person.

If you follow the recommendations and tips that we have described in this article, then you can safely say that very soon you will be waiting for that very unique and attractive room design that you have been dreaming about for so long.

To fix the plates on their surface, you will need to apply a small layer of glue, which means only one thing, that they can be easily dismantled if you ever have such a desire.

Everything is easy and simple, so you do not need to spend money on paying specialists, because you can achieve success on your own.

Many people of the modern world independently carry out such work, while they reach significant heights, which means only one thing, that if you wish, you will succeed.

And very soon, the interior of your premises will be changed beyond recognition, and you will enjoy the result.

If suddenly you have a desire to dismantle this type of tile, then know that you can do this work without much difficulty if you use a metal spatula, with it you just need to start scraping glue from the ceiling.

If assistants help you in this work, then installation can be done in a short time, it all depends on the area of \u200b\u200byour room.

This is what ceiling tiles are famous for, because they amaze more and more people with their unique characteristics.

Since such products are presented quite widely today, you should understand that you can also find such samples of ceiling tiles that have rounded edges, which means only one thing that you can lay without joints.

Now it is not difficult to guess what kind of atmosphere will be created if you do this, so everything is in your hands, so try to do everything correctly and correctly, especially since you now have all the necessary installation instructions.

There is no need to think that you cannot do such a job, in fact, there really is nothing complicated here.

And as soon as you read the necessary information about it and watch educational thematic videos, then positive effect your work is guaranteed.

In the event that you started doing this work and noticed how small gaps began to appear on the surface, which often happens, then they can be repaired without much difficulty using acrylic sealant for this.

You can buy it at any hardware store, it will help to carry out this stage work efficiently and efficiently. In general, we can safely say that the installation of such products diagonally can be exactly the same way as tiles are glued in any other way.

So, if you wish, you will definitely succeed, you will be able to achieve a unique and effective result, and he will definitely be able to please you. And to complete the design touch in this work, you must definitely purchase a ceiling plinth.

After all, this accessory is able to give the room a special atmosphere of beauty, sophistication and originality.

But remember that choosing the right ceiling plinth is not so easy, since today they are presented quite widely.

Therefore, try to choose for those rooms where you laid the ceiling tiles, that version of the ceiling cornice, which in any case will be able to satisfy your desires and ideas in the field of design.

In order to choose the right ceiling baguette, always try to consult with sales assistants who must help.

And then it will be possible to pick up a really original, attractive and reliable plinth, which can competently fit into the interior of the room, making it unique.

Now you know how to properly glue products diagonally.

If something is not clear to you, then do not forget to watch thematic video clips that will definitely help you solve all the problems you have, and after a while you will be able to get the desired result.

In addition to video clips, on the Internet you can also find a large number of photos on this topic, so you can definitely make sure that really gluing ceiling tiles can change the interior of even a gray room beyond recognition, making it more unique and original.

It turns out that each person will be able to master the technology of mounting such material as ceiling tiles, and carry out the work efficiently, efficiently and correctly, allowing you to enjoy the result.

All the subtleties of this topic have been revealed, now you should understand that everything depends only on you. The right approach to this work will allow you to achieve the desired result.

As a result, I would like to say that the experts themselves say that in the modern world, where everything necessary for carrying out such work has been created, everyone can do it efficiently, competently and efficiently.

After all, now you know about all the subtleties and nuances of this work, it remains only to competently and responsibly approach its implementation and enjoy the effect.

Today, when repairing the ceiling, all kinds of Construction Materials, which differ in design, installation method, price. Ceiling tiles can be considered one of the most versatile ones, as they are easy to install with your own hands, and they fit perfectly into the interiors of different styles.

Several technologies are used to produce the material. The resulting plates differ in characteristics and have certain advantages and disadvantages.

Pressed products

Styrofoam blocks serve as raw material for the production of white plates with a thickness of 5-8 mm. This finishing material is the cheapest and most popular. The main advantage of the product is its price.
Among the shortcomings, one can single out: fragility, complexity of processing (it is difficult to get a smooth edge when cutting). Due to the porous structure, dirt is easily absorbed and the surface is practically impossible to wash.

injection technology

Thanks to high-temperature processing, tiles with a thickness of 9-14 mm are obtained, having the correct geometric shape and a deep, clear pattern. Advantages: excellent strength, environmental friendliness, does not burn, good thermal insulation properties.
If, during installation, a tight joint of the elements is ensured, then a visual effect of a “seamless” decorative surface is created. The tile is produced only in white color, but it can be painted.
A significant disadvantage is the high price.

Extruded tiles

In the manufacture of products, the pressing method is used, followed by coloring of the elements or coating with a special film. Distinctive feature material - a dense structure, due to which the effect of a smooth surface appears.
Advantages of products: wet cleaning can be used, excellent dust and water repellency, recoverability after deformation, in case of cutting, a smooth edge is obtained.
Since the tile is slightly bent around the perimeter, small surface defects can be masked when gluing. Products are patterned and multi-colored. It is not recommended to repaint them yourself. The high price can be considered the only negative. According to the type of surface, several types of plates are distinguished:
laminated products are presented in a wide range of colors.
Thanks to lamination, the material has moisture resistance, strength, resistance to fading;
mirror tiles are more of a design option. It is made of plastic coated with a mirror layer and can be square or rectangular. Looks great in small rooms, as it visually expands the space;

seamless products due to smooth edges without edging allow you to create inconspicuous joints during installation. Differs in an acceptable price, heat and moisture resistance, good insulating qualities, practicality (coloring is possible).

The shape of the plate is square, rectangular, polygonal and wavy. Standard product sizes: 50x50 cm, 30x30 cm, 100x16.5 cm.

Materials and tools

To buy the right amount of tiles, you need to know the area of \u200b\u200bthe ceiling, the size of the product and their number in the package. It should be borne in mind that ordinary pressed tiles are hygroscopic, so it is not recommended to use them to decorate the ceiling in the bathroom.

Extruded plates are quite suitable for finishing the kitchen and bathroom, as their surface has the desired characteristics and is easy to clean with water with a little detergent. To fix the tiles, you can use different types glue: "Titan" is of a universal type, has a viscous consistency, does not seize immediately, and therefore for some time the plates will have to be pressed tightly against the ceiling. Advantage - low price;
"Moment" - quickly grabs, but for comfortable use you need a construction pistol. It costs a little more than analogues, but it is well deserved.
No special construction equipment is required for installation work. To make a quality repair, the following set of tools is enough: a sharp knife, a stepladder, a paint cord, a corner, nails (self-tapping screws) for fixing the cord, tiles, glue.

Ceiling preparation

In order for the finish to look flawless, maximum attention must be paid to the quality of the surface. Naturally, some defects can be masked, but serious flaws or an old coating can greatly spoil the finished result.
First of all, the old finish is removed: they clean off the paint, wash off the whitewash or tear off the wallpaper. Serious imperfections in the form of depressions or cracks are sealed with plaster or reinforcing tape.
The entire surface must be primed with a deep penetration compound. This will prevent the occurrence of dampness and the development of microorganisms. If the ceiling has a non-uniform shade (dark spots are present), then it is advisable to cover it with a layer of white water-based paint before gluing the ceiling tiles.

Pasting stages

Tiling is a simple process if the surface is well leveled and properly marked. Such repairs do not require significant moral and physical costs.

Stream Markup

This stage determines the quality of the entire repair, so you need to take it very carefully. For work you will need: fasteners (nails, screws), paint cord.
Before gluing the ceiling tiles diagonally, the surface is marked.
Cords are fixed in the corners of the room and beat off. The intersection point of the diagonals defines the center of the ceiling. From the center are perpendicular to the sides. It is these perpendicular lines that will serve as guidelines when sticking the material.

tile sticker

It is necessary to start the process of laying the plates from the center, since individual elements will have to be cut along the edges of the ceiling.
Glue is applied along the perimeter of the tile in the form of separate drops and one glue point is put in the center. Smearing the composition is not required. The square is placed on the ceiling so that its corners lie on perpendicular lines. The element is pressed tightly against the surface and kept under slight pressure for about 15 seconds. This time is enough for the tile to stick firmly to the ceiling.
The next four elements are located on the axes in such a way that one corner touches the corner of the central tile, and the diametrically opposite lies on the intended line. Thus, the squares are first attached along the perpendicular lines.
The chandelier is removed for the duration of the work and the wires are de-energized. On the plate, which is glued at the location of the chandelier, a place is planned for the ceiling. A hole of a slightly smaller diameter is carefully cut out. The wires are pulled into the hole and then the tiles are tightly glued.

If the chandelier cannot be removed, then the plate must be cut. To do this, a shallow incision is made on its back side, and the tile is carefully broken. A hole is cut out for the ceiling and pieces of material are glued to the ceiling. It is noteworthy that the fault line will be invisible.

The rest of the ceiling surface is sequentially glued with tiles, and you must always move from the center of the surface to the walls. Along the borders of the ceiling, you will have to glue individual elements, specially cut. If you use a ruler and a knife, you can make several parts from one plate.

Ceiling tiles are a great solution for those who don't want to deal with complex and time-consuming repairs as they are easy to use, functional and have a good maintenance factor. It is very valuable to know some practical advice, which you will inevitably encounter when decorating the ceiling with tiles with your own hands.

Ceiling tiles serve well finishing material and is appropriate in almost any room - living rooms, kitchens, corridors and even bathrooms. You have chosen the right color and size of the product, and the question is how to glue the ceiling tiles diagonally?

What tools and glue to choose? Below you will read detailed guide for finishing work with tiles.

Choosing glue

We start, as usual, with the purchase of the necessary materials, so that later at the last moment you don’t realize that something was missing, something was missed and we will create conditions in which it will be easy and fast to work.

Mounting adhesive is represented on the market by many companies that specialize in the manufacture of adhesive masses for specific purposes. We need ceiling tile adhesive, so it's better to buy the most popular type - "TITAN Wild".

Choosing a tile

The adhesive has good performance and does not pose a threat to humans, made from natural high-tech raw materials. Affordable cost, fast sticking and quality of work are significant qualities when choosing an adhesive.

Ceiling tiles - a high-quality and inexpensive solution

Before we start gluing the tiles on the ceiling diagonally, first of all we will choose the right one depending on the type of our room and its design solution. The cheapest option is polystyrene tiles.

By purchasing a tile from this material, you get:

Safety;
Versatility;
Ease of installation and weight;
The minimum thickness is no more than 10 mm.

Such tiles are durable and easy to use, but the coating is difficult to wash and accumulates dust..

Polystyrene tiles are available in three types:

Pressed;
Injection;
extruded.

Pressed tile is the most affordable material today, but the least durable. Injection tiles easily create the impression of a seamless ceiling, and also cope with sound and heat insulation.

Extruded tiles are the most durable and are covered with a special film that can be washed, vacuumed or wet cleaned. The range of colors among polystyrene boards is very rich - how to choose the right color?

Depending on the space, hardware stores offer a wide range of textures and patterns.

Tiles are produced white color, but:

You can draw a picture on it;
Paint with special paint;
Pick up an imitation of wood, fabric or wood.

The decorative properties of the tiles are rich and suitable for any kind of premises.

Before you glue the tiles diagonally, you can watch a short video clip about the installation process.

Finishing work

Agree, not everyone is satisfied with pasting with plates exactly, parallel to the walls, and I want something new.

To do this, people resort to various design solutions, for example:

Tiles laid diagonally;
Non-standard masonry;
Combination of types;
Combination different colors plates, etc.

We will look at how to stick tiles on the ceiling diagonally and thereby kill two birds with one stone - the room will noticeably change, and you will practice on your own.

Keep in mind that ceiling tiles are rarely glued to whitewash!

Ceiling markings

In both cases of masonry, the ceiling tiles are glued in the same way, but the markings are of particular importance - even luggage will depend on this condition. In order for the tile to lay flat, we start marking from the middle of the ceiling. Usually there is a chandelier hanging there, but you may not have it:

We draw four lines from the midpoint to the corners of the room
Divide the four corners in half and get 450.

Thus, these lines will become the main reference point in pasting the ceiling with tiles, and the installation will shift by 450 relative to the walls.

Advice! It should be taken into account that when choosing a tile, it is better to be guided by the size of the room where the repair is supposed to be. It is not always wise to use non-standard masonry, but in any case, you need to know how to glue tiles diagonally in a large room.

Work process

The ceiling is marked, the glue is bought, the time is right for the installation of tiles. The most important thing is to start, and then things will go pretty quickly. We always start work from the center, since we will have to cut the tiles along the edges of the room and dock them relative to the walls.

For this :

We apply glue in a thin layer along the edges and a drop in the center, you don’t need to smear anything!
Glue four ceiling tiles exactly in the center of the ceiling;
After 3 minutes, gently fix in place and press;
Hold for 15 seconds until the tile is firmly attached to the ceiling;
In the same way we glue the second tile, etc.

Tiles that are on the edge can be carefully cut with a knife or cutter and docked with the wall, choosing the right size. Try to save money by cutting out the right pieces from one tile, and remember to remove the adhesive from the surface of the tile so that it does not dry out and spoil the surface.

Surprised at how quickly you can get the job done? We did not reinvent the wheel and did not recommend anything extra, simplifying the process.

How to glue tiles diagonally without joints? This usually depends on the choice of tiles, most of them have slightly rounded edges. Large gaps should be sealed with an acrylic based sealant.

You can give the room a finished look and make a border ceiling plinth. After simple manipulations, your ceiling will turn into a neat whole canvas. We successfully hid the irregularities and imperfections of the surface of the main ceiling and significantly saved both money and time on finishing work.

By the way, the tile can be easily dismantled. How? Due to the fact that we applied the glue in a thin layer.

You will need:

Spatula with a hard blade;
Ladder.

Dismantling occurs according to the principle of scraping the tiles from the ceiling and the places where the adhesive mass is applied. If you are preparing the ceiling for pasting or painting, then the whitewash itself should also be removed.

After that, the ceiling is covered with a reinforcing primer using a roller or brush. What if the tile was not glued by you?

Attention! Beware of careless dismantling, not all installers use mastics and high-quality glue, so the edges can simply break off and even cut you! Cheap glue solidifies and becomes hard.

The question of how to glue the ceiling tiles diagonally can be considered permitted! In conclusion, I would like to note that for perfectly glued tiles, you should wash your hands more often in order to avoid gray prints and excess glue on the surface of the tiles.

You may even decide to paint it some color or install a baseboard - it's up to you!