Installation of double leaf sliding doors

PRICE LIST

Installation of sliding doors COUPE

PRICE LIST

PRICE LIST FOR ADDITIONAL WORKS

Do you live in a small apartment? Then the question of saving space is probably relevant for you.

In this case, it is worth abandoning the usual swing doors. When open, they take up quite a lot of space. The most successful solution in this situation is the installation of sliding interior doors.

How it works?

This type of door structures consists of the following elements:

• door leaf;
• sliding mechanism;
• rails.

The mechanism allows the door leaf to slide freely when opening and closing. Rails are installed at the bottom and top of the door jamb.

In the open position, the canvas is completely adjacent to the wall.

The main task of installation specialists is to correctly install the mechanism and rails. In order for the door leaf to open and close freely, it is necessary to make accurate measurements. Installation technology must be observed as carefully as possible.

Turn to real professionals - to the company "Nevis Doors". We carry out installation of interior sliding doors at reasonable prices. For several years of work, we have completed hundreds of orders. All our clients are satisfied with the work we have done.

Our specialists are ready to go to any district of Moscow and the Moscow region.

sliding door installation cost

Our base rates are shown in the price list. To find out the exact individual price, call us at:

If your doors do not please you with their appearance: the door is cracked, sagged and dried out, the lock has become very sticky. Have you thought about replacing it more often? Do not hurry! Try to fix everything with your own hands. Most of these problems can be "cured" on their own, saving a lot of money.

• Overview of typical faults;
• How to strengthen the door frame if it loosened;
• Sagging and scratching the flooring, what to do;
• How to correct the geometry;
• Large gaps, what to do;
• How can you strengthen the panels yourself;
• What to do with cracks;
• How to replace a broken lock with your own hands;
• The handle broke, how to replace it with a new one;
• How to replace broken glass yourself;
• Do-it-yourself repair of sliding structures.

Overview of typical malfunctions of interior doors

Often, when a door looks respectable, we forget to "take care" of it. And yet, no matter how expensive and high-quality it may be, time takes its toll and it needs cleaning, lubrication or adjustment, in short, preventive measures. When they are not done on time, the door begins to create a lot of problems for the household:

• sag, scratching the flooring;
• a nasty creak appears;
• door hinges are loose;
• hard to enter the door frame;
• just chill and so on.

One of the most basic causes of all shortcomings is considered improper operation or quality.

We strengthen the loosened door frame, the repair sequence

The step-by-step instructions for repairing the mount are as follows:

Sagging and scratching the flooring, what to do, how to repair

An easy solution is to re-hook the hinges or replace them:

Adjustment with a washer attached to the hinge.

How to correct the geometry of the interior door

Sometimes it happens that not a single piece of repair advice helps to eliminate the problem of sunken doors. Most often this happens due to the fact that it cracks or, on the contrary, swells. The way out is to correct the edges around the perimeter.

What needs to be done, what repairs are required.

Important! Before planing the door, make sure once again that the problem is not in the deformation of the box.

Large gaps, how to repair interior wooden doors

When door products are made from wet wood, the door will definitely dry out during operation, which creates a lot of inconvenience and problems during use: the tongue cannot reach the latch, large hinges between the frame and the door, as a result - the door sags a lot.

What to do in this situation?

How to independently strengthen the panels on interior wooden doors

When they dry up interior doors, problems can arise not only in the form of gaps that appear, but also in the panels. They lose their tightness. What should be done in such cases?

The only correct solution in the repair will be plywood.

• It is required to remove it from the hinges;
• Disassemble completely;
• Thoroughly clean from old glue and dirt;
• Reassemble the bars and connect (glue);
• The panels are put in place, then the door is fixed in the clamping device.

What to do with cracks on wooden interior doors

The repair process is laborious and painstaking, however, the result is worth it. The algorithm of actions for restoration is as follows:

For clarity, watch the video:

Advice! You can, as an alternative to the entire restoration process, use special decorative overlays. Moreover, after that, it will be difficult to distinguish it from the new one.

How to replace a broken door lock with your own hands if it cannot be repaired

This device has the main load, so they very often fail. Signs that it is time to repair or change it: it closes very poorly, the handles scroll. This suggests that the larva of the locking device is unusable and it's time to change it.

• The first thing to do is to take out the larva, for this, screws are unscrewed on the end plate, after which it is removed quite simply;
• decorative strips are dismantled along with handles;
• carefully unscrew the remaining fasteners, remove the device case;
• after which a new locking device is bought, suitable in size (so as not to drill new holes) or a similar model, and mounted in the lock opening.

The repair process is shown in more detail in the video:

The handle in a wooden door broke, how to replace it with a new one

In order to change the handle on the door panel, you need to carefully read its design

follow further instructions:

• unscrew the fasteners on both sides with a screwdriver;
• pull the handle out of the canvas;
• using a wrench, unscrew the rotary mechanism in the handle and remove it.

If the handle is equipped with mechanical locks (latches), then proceed as follows:

• the process of unscrewing the fasteners is similar to the above;
• then carefully inspect due to what it is held. Typically, such models are equipped with mechanisms for the movement of the tongue and the rod, inside which there is another rod. When it is removed, the handle is easily removed.

How to replace broken glass in interior doors

Designs with glass inserts in apartments look, no doubt, beautiful and stylish, but unlike wood, glass tends to break. If such a nuisance happens, then you should not call the master, and even more so change the design of interior wooden doors. Let's get started with the repair.

Removing the rest of the glass:

• this requires loosening the glazing beads (wooden strips that hold the glass);
• carefully remove all residues and fragments;
• some modern models have a rubber gasket. It must be pulled out and carefully examined. If it's damaged, change it too.

Preparatory work before repair:

• if the broken glass has a regular rectangular shape, then it is quite simple to repair - the dimensions are taken and a new one is ordered in the workshop. If the door is with figured glass, then you can draw the shape with a pencil and cardboard;
• if the broken insert was painted over or all kinds of putties, putties were used, they must be carefully removed;
• before inserting a new one, it is best to remove the door so that the glass does not break if it accidentally falls, and it is very difficult to work on weight;
• before laying on the bed, apply a layer of silicone;
• a rubber gasket is inserted and only then it is laid, fixed with a glazing bead.

Do-it-yourself repair of sliding structures

This type of interior paintings in residential apartments is not uncommon, especially at the present time. If earlier they were used for attractiveness and beauty, now it is caused by saving space. Such structures are equipped with a sliding mechanism, which tends to fail over time.

Main faults:

• hard to open or vice versa;
• the top rollers can pop out of the guides;
• loosening of the upper mounting plate.

Repair sequence:

In the first case (heaviness when closing) - the repair consists in cleaning the accumulated dirt. In the second case, if you are sure that the rollers need to be replaced, then you just need to repair them:

• remove it from the guides;
• remove old and worn ones, insert new ones;
• the door panel is installed in its original place.

How to do this is described step by step in the instructions or watch the video tutorial:

We really hope that the above tips and instructions will help you repair interior doors with your own hands and postpone the purchase of new ones for an indefinite period.

5.00/5 (1 ratings)

How to deal with the problem of a small space in an apartment or room that you absolutely do not want to clutter up? There are several ways to increase the usable area, and one of them is sliding interior doors.

They consist of a base, which is several canvases or one solid one, and guides that provide soft and silent opening and closing of sliding doors.

Thanks to a lucky constructive solution a small room will accommodate more furniture, and the entrance to the room will be free. In addition, the original design of such doors will decorate the interior, making it fashionable and elegant. Pay attention to .

There are two types of sliding canvases - doors and partitions. Their main difference is in the location: partitions - directly in the room, zoning its space, and doors - in the openings between the rooms.

Advantages of sliding-sliding interior doors

Different types of doors have their pros and cons. Sliding models have many advantages:

• Aesthetics. Due to the unique design, the door leafs are attractive in appearance, elegant and unique in their appearance. design solution. The owners of the house, who prefer sliding doors in the interior, undoubtedly know how to equip their home with taste.
• Versatility. With interior compartment doors, you can decorate the interior in a wide variety of styles - from hi-tech to ethnic, and the materials used in the manufacture of canvases (wood, plastic, glass) help create the right impression. Versatility also lies in the fact that for such doors the size of the opening does not matter: a larger number of leaf elements will successfully close the opening of a non-standard wide size.
• Space saving. Unlike swing doors, sliding models allow you to slightly increase the usable area near the adjacent wall.
• Convenience and safety. Doors provide protection against accidental injury to hands and fingers, so you do not have to worry about the safety of young children. In addition, such an interior door will not open from a draft, and the efforts of pets when trying to get into a closed room will be in vain.
• Ease of installation. Simple rules for installing sliding entrance doors will be mastered even by a novice home repair master.

Flaws

• Special locks. Sliding interior doors require locks specially made for them, which, moreover, are not too cheap.
• Low level of thermal insulation. A door that is not made of a solid sheet allows air to pass through almost freely, so installing sliding doors at the entrance to the house is impossible.
• Bad soundproofing. Due to the fact that sliding doors easily let in noise from nearby rooms, they are not recommended to be installed in rooms where silence is the main condition for comfort.
• Difficulty in maintaining cleanliness. The niche in which the door hides when folding is a rather inconvenient place for cleaning. Cleaning the dust that accumulates inside is a difficult process, since access to the place is limited. If you do not take care of timely cleaning, the rollers will not be able to roll freely along the guides - they may warp or jam. Models that have removable “pocket” elements will help to avoid cleaning problems.

Types of sliding interior doors

The division into types of doors with a sliding structure depends on:

• the number of valves;
• fabric material;
• opening-closing method;
• mounting mechanism.

By the number of leaves, single-leaf and double-leaf sliding doors are distinguished. The first option is suitable for rooms with small dimensions, since the door leaf moves to the side when opened (like a compartment). For single-leaf models, a door frame is not needed, but special attention should be paid to the design of the opening. Doors with one leaf are attached to the wall or to the ceiling.

Sliding doors with two wings are more often used for non-standard, wide openings. Along with excellent functionality, bi-leaf doors have a pleasant appearance. They are best used in large areas. Typically, in such models, one of the wings can be fixed in the closed state, and the other half can be used.

Despite the apparent fragility of glass sliding doors, they are considered quite popular among consumers. Transparent and beautiful, the doors transmit light well. At the same time, they are safe to use. strained glass protected from impact. Glass doors are mounted on an aluminum frame, under the bar of which a retractable system is hidden. At the bottom, a stopper-limiter of the glass sheet is installed. Sliding glass doors can consist of one, two or more canvases, and the leaves are folded either independently of each other, or according to the principle of a telescope. As decorative finishes glasses are used that have different color shades or a matte surface.

Interior sliding doors of "accordion" type

Accordion-folding doors are a relatively new model that owners of small apartments prefer to use in the interior. Their compactness and functionality are undoubted advantages, thanks to which accordion doors are popular on the market.

They are a design that operates on the principle of window blinds: several small-sized door leaves are shifted to the side, moving along the rail on rollers. The lamella segments fold to hold the door in the open position.

The materials for the manufacture of accordion doors are varied: wood, MDF, plastic, glass, bamboo, aluminum, and their combinations. Outwardly, they resemble a screen or a book door, but the number of elements (wide or narrow) they always have is more than two. By placing them in a niche, you can highlight the zones in the room. Perfectly fit into the interior of hi-tech, techno, minimalism.

Features of doors-books

The best option for narrow corridors, walk-through and adjacent rooms would be a book-door, similar in principle to folding with an accordion. A variety of design design of doors-books, regardless of style, fills the house with comfort and beauty.

The interior door-book consists of two elements of canvases, one of which is attached to the door frame, and the other moves freely on a roller along the guide.

Tilt-sliding interior doors provide maximum space savings due to the possibility of opening them in any direction. The rotation system, on which the door leaf is fixed, rotates it around the circumference within the frame of the door.

Roto doors look very unusual, so they can become a real highlight of the interior. In addition, their soundproofing properties are much better than those of other types of sliding models - a closed canvas adjoins the box, and the lock does not allow the door to swing open on its own. AT open form half of the door leaf is in one room, and the other in the next.

Most often, rotary-sliding models are preferred when installing doors to the bathroom, corridor, dressing room.

Owners who decide to completely transform the interior spaces should pay special attention to the doors hidden in the wall. They are more compact than all previous options, but require much great effort and serious calculations during installation.

Doors-pencil case consist of two parts: visible (canvas moving along guides on rollers) and hidden (the so-called "pencil case" located in the wall). When opening the door leaf deepens into a special niche, and the opening remains completely free.

Types by mechanism used

Each of the types of interior sliding doors has its own mechanism. The fittings differ in the method of fastening, the shape of the guides, the number of gutters and rollers, depending on the size, type of construction, and the weight of the door panels.

Roll-out systems are:

• with two guides on the top and bottom of the box;
• with one guide located at the top.

The first option is the movement of the canvas with the help of rollers fixed at the top of the opening and on the floor. At the same time, the door is stable, and the absence of free space between the leaf and the frame retains heat and protects against the penetration of extraneous sounds when closed.

It is important to keep the guide troughs clean at all times to allow the rollers to move freely.

The second option is just one track above the door, held by an aluminum frame that is fixed to the wall. To install a door with one guide, you need: a frame installation kit, rollers, locking devices.

The number of roller mechanisms depends on the weight of the door leaf: one roller will completely cope with the movement of a 70-kilogram door, but if the weight is greater, then more rollers will be needed.
So that the door does not come out of the grooves of the gutter, reliable locking devices are used, and the flags protect the doors from possible play.

The advantages of roll-out mechanisms are obvious:

• the doors move along the guides almost silently - the silicone surface of the rollers and the lubrication of the bearings are responsible for this;
• sturdy top rail provides long term operation and safety of the sliding door.

Folding door mechanism

For doors folding like an accordion or a book, the mechanism is somewhat different. So, a profile is attached to the wall adjacent to the doorway, to which one side of the canvas is attached. A guide is installed on top, along which carriages with rollers move, opening and closing accordion doors and books.

Features of mechanical and automatic sliding doors

The most common sliding interior doors in homes have manual principle opening and closing, that is, it is enough to press the door handle with your hand. Automatic sliding doors have a more complex design and, accordingly, require more financial costs. Door leafs in this case, they are controlled by an infrared sensor that is triggered by movement.

The ease of use of such models is undeniable, but the cost of equipment and installation of the system can surprise even a well-to-do person - about $ 700. It is the price that is the decisive factor when choosing the installation of manual or automatic sliding doors, so automation is rarely found in residential buildings.

Installation conditions

It is better to entrust to specialists who are able to make all the calculations and introduce the door into place so that there are no bevels, inconsistencies between the guides, rollers and frame.

Installation technology is available, but requires accurate measurements and accuracy in the performance of work. Particular attention should be paid to canister doors, since the arrangement of a niche for hiding a door can only be done in a wall that does not have sockets, switches and internal wiring.

• have a lot of experience;
• will come with their own equipment and tools;
• do the job well and cheaply.

In order not to run into amateurs, ask the master a couple of questions about repair technology and ask how long he has been repairing interior doors.
When might an interior door need to be repaired?

1. From the difference in humidity and temperature, the structure was deformed or sagged.
2. There were chips, cracks, scratches on the canvas.
3. Finishing material peeled off.
4. Loose loops.
5. There was an annoying creak.
6. Broken latch or hardware.

Repair of interior wooden doors

Most often, repair of locks, replacement of broken glass or other decorative elements, restoration normal operation door handles. Usually, breakdowns do not occur because the manufacturer has released a low-quality door, but because the owner uses the design inaccurately.
Modern market building materials allows you to restore interior doors or radically change them appearance. The professional will:

• special putty;
• soft or hard wax;
• varnish on the floor with a matte, matte or glossy base;
• color using unique paints that are resistant to abrasion and moisture.

The master from the EtoDom catalog will repair sliding, swinging and any other wooden structures even after a fire.

$ Repair of interior doors. Price in Moscow

The cost depends on the volume and complexity necessary work. But I must say that repairing an old door, in any case, will cost less than buying a new one.

Every day sliding interroom doors, interroom doors Profile dors and also partitions become more and more popular. Many people prefer them, as they do not take up as much space as ordinary doors, or rather, they do not take it at all. Installing such doors with your own hands is not difficult, and it will not be difficult to repair such doors.

If you're having trouble getting your sliding doors to work, it's worth checking the top and bottom rails first, as a lot of dust can simply accumulate there, causing them to malfunction. In this case, you just need to remove dust with a vacuum cleaner from the guide rail. Among sliding doors, it is quite common to encounter such a problem as the upper or lower rollers jumping out of the guide rail. In this regard, there is also a need to periodically check whether they are in place.

If they still popped out and it is in your power to put them back in place, do it. In another case, this may lead to a change in the shape of the guides. The rollers must be placed in the grooves of the upper or lower guides. It is also worth paying attention to the stoppers: if they open, and this happens often, they should be closed. Since rollers deteriorate over time, they need to be replaced periodically. First of all, you need to remove the doors for this. In the event that stoppers are present in the guide rails, they should be opened first, and then carefully remove the door. Then, using a screwdriver, you need to remove the old rollers and install new ones of the same type in their place.

Sliding doors also often have such a nuisance as loosening over time of the upper bar, on which the guide rail is fixed. If this happens, this bar should be fixed again or replaced with a new one. To do this, you need to drive the dowels into the already prepared holes or move them slightly away from the latter. Next, you need to attach the bar, after which you can start screwing the screws. Please note that the guide rails should be attached as evenly as possible, even if they are distorted. Otherwise, such doors will not work for long and will soon break.

The door system has special carriages for fixing and installing fixing parts. This system can also break down over time. It is also possible that such a mechanism was initially poorly adjusted and eventually failed. In this case, you should first adjust the sliding doors, and then reinstall the locknuts from below under the adjusting bolts.