How to clean a plastic kettle. How to efficiently and easily descale an electric kettle? Why you need to get rid of scale

There is a kettle in every kitchen. It doesn’t matter if it’s an old metal appliance or a modern electric one - any of them requires timely care, not only outside, but also inside. Here the question comes to the fore: “How to clean the kettle from scale and why do it?”

That's what we'll talk about today, and at the same time we'll figure out what measures can be taken to minimize the appearance of an unpleasant sediment.

Scale is formed due to the content of salts in water, mainly calcium and magnesium carbonate. Over time, they are deposited on surfaces that come into contact with water: in kettles, thermo pots, dishwashers and washing machines.

And no matter what good teapot you choose, sooner or later you will still encounter the problem of white hard deposits. In ordinary kettles, it covers the bottom and walls, and in electric kettles it also covers the heating element, significantly worsening thermal conductivity.

In this case, the water heats up longer, and in electric kettles, the presence of sediment can lead to breakage. To carry out its function, the spiral or disk has to heat up more and more each time. This leads not only to an increase in electricity costs, but also provokes the rapid development of the resource of the part. Eventually the heater will just burn out.

Scale is dangerous to human health, since its particles penetrate the body and provoke the development of kidney disease, osteochondrosis and gout. In addition, under the influence of salts, the taste of drinks changes, a whitish precipitate appears in the glass.

How to deal with scale and what not to do?

Fortunately, knowing the nature of the occurrence of an unpleasant sediment, it turns out to be quite easy to fight it. Plaque is afraid of organic and inorganic acids: under their influence, it becomes loose, so removing it is not difficult. Armed with this knowledge, you can get to work.

But first, let's talk about what not to do:

  • Remove scale mechanically with a knife, scrapers or a metal sponge. Thus, you will spend a lot of effort, but you still will not achieve the ideal result. In addition, there is a high risk of damage to the device.
  • Do not use harsh chemicals such as Whiteness. It will remove the plaque, but it will be very difficult to wash off the remnants and get rid of the pungent odor.
  • Powders with large granules can scratch the surface, scale will form even faster.

Special funds

The chemical industry has developed special formulas for easy softening and descaling. These are, for example, Cinderella, Antinakipin, Flat, Bosch and many others.

They are easy to use: in most cases, it is necessary to dissolve the product in water, boil and leave for a while.

Please note that some formulas have a different way of being applied. Be sure to read the instructions!

Folk methods

Why spend money on household chemicals, look for where they are sold, if there are no less effective products in every kitchen?

After using any of these methods, thoroughly rinse the kettle and boil clean water in it at least once. This is necessary to remove the remaining particles of the product and the smell.

Soda

A gentle method that is suitable for all kettles, including aluminum and enameled ones. You need to mix 500 ml of water with 1 tbsp. l. soda (preferably soda) and boil over low heat for 30 minutes. After that, wash the device inside well with a sponge or cloth, if there is a need to repeat the process.

Vinegar

A rather aggressive method that will help in the fight against old deposits in metal, glass and plastic kettles.

It is necessary to pour 500 ml of water and let it boil. Then pour about ¾ cup of table vinegar or 1 - 2 tbsp into boiling water. l. 9% vinegar essence and leave for 1 hour. Periodically, you need to check how the peeling process is going on, and as soon as all the scale has gone, wash the kettle.

Be sure to wear a mask and open a window to protect your airways from the vinegar fumes.

Lemon acid

Suitable for quick cleaning of glass, plastic and stainless steel appliances.

Bring to a boil 0.5 liters of water and dissolve 1 - 2 tbsp. l. lemons. Let it cool down completely and repeat the procedure if necessary.

You can take into service not only powder, but also fresh lemons.

To do this, cut half a citrus into pieces and put in a teapot. Otherwise, the recipe for use is the same as with citric acid. But as a bonus of this technique: a pleasant citrus aroma after processing.

Brine

The composition of the brine from cucumbers or tomatoes contains acid, which means that it can be used to remove plaque in enameled teapots and stainless steel.

To do this, filter the liquid through a sieve and boil. The brine level should be no more than ⅔ of the volume of the kettle. After that, let the liquid cool and drain it.

cleaning

At home, you can prepare a mild remedy for any teapots. It is suitable as a prevention of plaque formation or if there are few deposits. Potato peels or skins from apples and pears will do.

Remember to thoroughly wash the potato peelings off the ground.

We shift the peels into a kettle, fill with water and boil. Let cool, remove the remaining scale with a sponge.

For electric kettles, you can apply the following recipe: put the cleaning in a saucepan, boil and pour the finished broth into the device. Heat again to 100 ° C, let stand and rinse.

Carbonated drinks

Suitable for stainless steel cookware and electric kettles. In enameled and tin, use with caution.

Don't use colored sodas like Fanta or Coca-Cola on plastic devices because they can stain the surface. Better take a colorless drink: 7UP or Sprite.

To learn more about how to clean your kettle with Coca-Cola, watch this video.

In order to use the soda, first open it, let the gas come out. Then pour the drink into the kettle and let it boil. Cool down and clean the appliance.

Triple strike in advanced cases

With a very persistent draft, a three-phase system will help:

  1. Pour water and dissolve one tablespoon of baking soda in it. Boil, and then drain the liquid.
  2. We fill the kettle with water again, but now we add citric acid (1 tablespoon) there. Let it boil for about half an hour and pour out the solution.
  3. Now pour 0.5 cups of vinegar into clean water and boil again for at least half an hour.

This method will help soften and remove the most persistent plaque. But it is better not to bring the dishes and appliances to the point where they need such cleaning.

Prevention of scale formation

To prevent scale from reappearing, follow these recommendations:

  • Install a filter or buy bottled water.
  • Pour the leftovers after boiling into another container, and rinse the kettle thoroughly.
  • Do not heat the same water repeatedly.
  • Pour a solution of citric acid at least once a month. Just let it stand for about an hour and rinse. You can also use cleaning or brine.

Conclusion

Scale phenomenon, of course, unpleasant, but inevitable. If you fight it regularly and do not let it firmly settle on the walls of your kettle, then it will not cause any problems.

Rinse the kettle regularly, dedicate half an hour a week to preventive cleaning, then salt deposits will not even have a chance to settle in your kettles.

The water in the taps leaves much to be desired, so lime deposits remain on the walls of all devices that come into contact with it.

Even expensive water filters will not be able to prevent plaque. Sooner or later, it will appear on the surfaces of the appliance and the question will arise how to clean the kettle from scale.

Folk methods

Limescale can be removed quickly using special chemicals. But since they are not safe for health, many prefer folk methods that have been tested by time.

Vinegar

Vinegar is not suitable for removing lime deposits in an electric kettle. This tool is too aggressive and manufacturers do not recommend using it for such equipment.

You can clean the electric kettle with vinegar only as a last resort, when a large layer of deposits has accumulated.

During the procedure in the kitchen will be felt. Therefore, manipulation should be carried out in a room with good ventilation. Open all windows and vents.

When working with vinegar, wear a protective mask so as not to breathe in harmful fumes.

How to clean the kettle from scale:

  1. For metal devices, the following solution is prepared: 150 ml of 9% table acid is mixed with 1 tbsp. l. essences. ⅔ of water from the total volume is poured into the container, then the prepared composition is added. The mixture is heated and boiled for half an hour. After turning off the stove, leave the kettle for 5 minutes so that the water cools down a bit and repeat the procedure again. This must be done up to 3 times. With a strong limescale, the solution is left overnight. After that, you need to be good.
  2. How to descale an electric kettle: devices made of a plastic case can be damaged if acid is used in pure form, so the preparation of the solution is slightly different. Water is poured into the device to be cleaned with 5 tbsp. l. citric acid and acetic acid. The device is turned on, left to boil, then turned off. After 15 minutes, the process can be repeated. The process is repeated 3-4 times until the entire plaque is removed. Then washed with detergent.

Descaling the kettle with vinegar is quick and easy. Only such a product leaves behind an unpleasant odor, even after using a detergent.

Boiling clean water, which is carried out at least 3 times, will save you from the stench.

Lemon acid

Cleaning the kettle from scale is gentle for him and safe for humans. Citric acid is an excellent remedy for getting rid of plaque from any thermal elements.


The advantage of this product is the absence of an unpleasant odor, which is good if there are small children in the house.

How to clean the kettle with citric acid from scale:

  1. For conventional appliances: take 2 packs of product, fill the appliance with water, but not completely. Add citric acid to the liquid and boil. The solution should cool down, leave it for 10 minutes. Then cleanse and remove plaque. The procedure can be repeated if the plaque has lagged behind the walls unevenly.
  2. How to clean the kettle from scale with citric acid, if it is electric: a solution of 1–2 tsp is poured into the bowl. funds and 1 liter of water. After the liquid boils, it is drained and another one is collected. It is necessary to boil clean water several times.
  3. If the deposits are small, you can clean the kettle from scale with citric acid even easier. It is dissolved in warm water, poured into the device and left for 6 hours. After that, you need to wipe off the plaque with a sponge.

Descaling the kettle at home is easy and cheap. You can buy the product at any grocery store.

Sodium bicarbonate

Not only Coca-Cola is suitable, but also Fanta, Sprite, Lemonade, Schweppes.

How to remove scale in an electric kettle:

  1. First you need to release the gas from the drink.
  2. Pour 500 ml of Sprite into a container, close and let it boil.
  3. After boiling, the device is turned off and the liquid is allowed to cool.
  4. Wash off the remaining plaque with a soft sponge, rinse the kitchen appliance several times with clean water.

Coca-Cola and other carbonated drinks contain phosphoric acid. Thanks to her, it turns out to remove lime deposits.

This method is ancient - it was successfully used by our great-grandmothers. The method is suitable for all types of devices and is available to everyone.


The only drawback is that it will not cope with chronic growths.

How to descale an enamel kettle:

  1. Water is poured into the device and washed apple or potato peels are placed.
  2. The liquid is brought to a boil and left for 1.5 hours.
  3. Then they walk along the walls with a sponge.

You can clean the electric kettle from scale using this method if you carry out the procedure several times a week.

If the appliance has not been washed for a long time, do not waste your time. Apple peel and potato peels will not help in this case.

Brine

Plaque removal is possible with cucumber or tomato brine. This is an effective folk way.

How to remove scale in an electric kettle:

  1. Pour the brine into the appliance.
  2. Bring to a boil.
  3. Cool, pour out the brine and wash thoroughly from plaque.

This tool is not standalone. Thanks to the vinegar and salt in its composition, the purification process takes place.

Oxalic acid

Of all the cleansing folk remedies, oxalic acid is considered the most aggressive. It removes heavy limescale deposits.


How to remove scale from the kettle?

Advice of hostesses - algorithm of actions:

  1. I pour a small amount of the product into the device and fill it with water.
  2. The solution must be boiled and left for 5 minutes.
  3. I remove the remains of the product and clean it with a soft sponge.

Oxalic acid is a good remedy and many housewives recommend using it. Fresh sorrel can also be used to descale, only it contains a little acid, several manipulations may be required.

Household chemicals

The range of household chemicals is great. Products on the shelves of stores effectively remove scale in the kettle.

Before using any products, wear gloves and a protective mask.

Antinakipin and Major Domus can be used as cleaning agents. These decalcifying chemical products are effective on all types of soiling.

How to wash limescale:

  1. Antinakipin. First, water is poured into the dishes to be processed, then the contents of the bag are poured at the rate of 100 g per 2–2.5 liters of water. The solution is brought to a boil and boiled for 20 minutes. After turning off, the liquid is left for 2-3 hours so that Antinakipin works better. To clean the kettle, take a sponge and remove the remnants of plaque.
  2. Major Domus. The product is poured into a container, left for 20 minutes. You don't need to boil. After that, the device is washed with plenty of water. If necessary, the procedure can be repeated.
  3. Cillit another good industrial tool that can quickly remove plaque from the surfaces of the inner walls of coffee makers and kettles. It is necessary to fill the container with clean water, dissolve Cillit in water in a ratio of 100 ml for every 500 ml of water. The agent is left for half an hour. After that, the container must be rinsed. Cillit should be used no more than once a month.

Household chemicals can cause serious irritation of the mucous membranes. When using such tools, you must wear glasses, or do not touch your eyes with your hands during manipulation.

Removal of limescale must be carried out in a timely manner so as not to resort to the use of household chemicals.

Due to the large amount of accumulated plaque, the electrical appliance is not only a source of some diseases, but the functionality of the device suffers because of it. Before changing the device to a new device, it is worth trying one of the folk methods cleaning.

Plaque forms on the heating element of the kettle and its walls, which is ordinary salt that has settled on the surface. Before cleaning, you need to figure out what is the cause of limescale. Sometimes it's about the quality of water: then it is necessary to replace it with a better one.


In order to remove scale, you will need the most simple products, which are in the kitchen of most housewives.


1. You will need 2 tablespoons of vinegar and 50 g of citric acid: pour vinegar into the kettle and then pour lemon, boil the kettle and leave it with this mixture for 60 minutes. After the specified time, the plaque can be easily washed off with a sponge. If the first time there is a plaque, then you can repeat the procedure. Sometimes lemon is used instead of citric acid.


2. Baking soda is an excellent tool for cleaning the kettle. First, pour water into the kettle, then pour 1 tablespoon of table salt there, boil the water and leave for 30 minutes, then pour water into the kettle again, add 0.5 teaspoon of citric acid and put it on fire again. After the water has cooled, you can start washing the kettle with a kitchen sponge.


3. Vinegar also helps to clean the kettle: pour a third of vinegar and two parts of water into the kettle, then boil the water and leave it to cool. Scale in the kettle under the influence of acid will dissolve, then it can be easily washed off.


4. One of the most non-traditional methods cleansing is the use of ordinary sparkling water. Pour water into a kettle, bring to a boil, and then drain. After this manipulation, the limescale should move away.


5. Keep in mind that there are a large number of household chemicals in stores for cleaning limescale. Sometimes such funds are quite expensive, and the result is not so effective, so you can use the methods.

Consider the following points:

1. After carrying out the cleaning procedure, the electric kettle must be rinsed, otherwise the substances that you used for cleaning may enter the body along with drinks.


2. Most the best remedy in the fight against scale - this is the daily care of your electric kettle.

Scale always appears on the inner walls of the kettle, regardless of whether it is electric, metal, or coated with a special enamel. Even if you use special water filters, or use only purified water, scale still appears with inside kettle. Its presence reduces the quality of the water that boils in it.

If it's about electrical appliance, then it accumulates directly on the heating element, which leads to a quick breakdown of equipment. If the container is made of metal, not only scale, but also rust will get into the water.

Today, most of the kettles in use are powered by electricity, so it is important to know how to remove scale in an electric kettle.

Water is one of the most necessary products for a person, without it we cannot live even a week, but it can also contain many harmful substances and harmful organisms. To combat the latter, people have long begun to boil water, but this process does not allow you to remove salts and other impurities. And the water that comes from the water supply contains a lot of such substances, and the more of them, the more “hard” the liquid will be.

Salts in excess are harmful to the body, so the fact that they remain on the walls and / or the heating element can be beneficial for a person, but over time they become too much. To prevent scale formation in an electric kettle, filters can be used, but they cannot completely eliminate the salt content in the water.

Negative consequences of scale in the kettle:

  • breaking;
  • water pollution;
  • harm to the body, in particular to the organs of the urinary system.

That is why it is important to know how to descale an electric kettle and not neglect its cleanliness.

Prevention

Certain measures allow, if not completely eliminating the formation of scale on the surface of the heating element, then at least significantly reducing the rate of formation. There are several simple ways to prevent:

  • wash the kettle daily, a thin coating is easy enough to remove using an ordinary sponge, but a thick one will have to be removed with difficulty;
  • use filtered water, you can also buy pre-purified water;
  • drain excess water after each boil, leave the kettle empty at night;
  • notice the need for cleaning in time, the thicker the layer, the more effort will have to apply to clean it.

You can simplify care already at the purchase stage by opting for an electric kettle, in which the heating coil is closed from contact with water, or a disc is used for heating.


Remove limescale from an electric kettle with home remedies

Scale is susceptible to various substances, and the practice of cleaning electric kettles involves both the use of special products and folk recipes. Active substances allow you to dissolve and remove scale, some of them are quite affordable, and are sold even in ordinary grocery stores. These include:

  • vinegar;
  • lemon acid;
  • soda.

Scale can be removed different ways, and the most harmful for technology will be mechanical. You should not try to remove plaque using hard and sharp tools, as this will further damage the device. Damage to the body or heating element will be irreversible, and after their occurrence, all that remains is to get rid of your electric kettle. You should not resort to the mechanical method when the layer has become very thick, only pre-treatment of the rigid (but not metal) inner surface with a washcloth is allowed.


citric acid

Of the acceptable descaling agents for an electric kettle, citric acid is one of the mildest. When preparing the composition for processing, it is necessary to dissolve 10 grams of citric acid in a liter of water. It is sold in ordinary grocery stores, usually in 25-gram packs.

To make the calculations easier, it will be enough to pour the contents of one bag into one full kettle. After the finished solution is in the electric kettle, you need to turn it on.

Do not leave the device unattended, as soon as the liquid is brought to a boil, it must be turned off, otherwise the boiling water will start to foam and splash out over the top.

After completing this simple procedure, the hot solution should be left inside for 15 minutes. This time will be enough for the acid to dissolve the scale, or reduce its thickness.


After the procedure, the solution is poured out, it cannot be used for other purposes, and the kettle itself is washed so that the remnants of active substances do not get into tea or coffee later. If the layer was too thick, the descaling procedure with citric acid can be repeated.

Under the influence of citric acid, the scale is converted into a loose gray precipitate, in addition, the liquid will contain small pieces of lime in the form of plates. Alternatively, you can use not the powder in the store, but the lemons themselves.

For effective processing, it will be enough to place 1-2 lemons inside the device, cutting them into circles. The effectiveness of this method is no less high; at the same time, a strong lemon aroma will escape into the room along with the steam.


Vinegar

The second way to remove scale from an electric kettle involves the use of vinegar, popularly called the "grandmother's" method, if only because it has been used for a very long time.

Initially, vinegar was used against scale on copper kettles, but for modern electric kettles it may be quite enough. For the procedure, you need the usual 10% solution, which is in every kitchen.

Mode of application:

  1. An electric kettle is filled two-thirds with water, and the last third must be filled with vinegar.
  2. The resulting mixture must be boiled, and then leave the device and wait until it cools down. During this time, the scale layer should dissolve, or significantly decrease.
  3. After the procedure, it must either be repeated or the kettle thoroughly rinsed several times. hot water so that no vinegar remains on its walls, which can spoil the taste of any drink.

Acetic acid is an effective reagent for removing scale, due to the chemical reaction that it enters into with salts, the latter are decomposed into simple substances. For a conventional electric kettle with a volume of one and a half to two liters, two glasses of vinegar will be required. At this method There is also a significant drawback - the smell.

After the procedure, a persistent vinegar aroma will reign in the kitchen, which will not seem pleasant to anyone, so you should take care of ventilation in advance.

soda

In case you need to remove very serious pollution, the effect of acetic acid can be supplemented with soda. First, a concentrated soda solution is boiled in an electric kettle, and after that we immediately fill the equipment with vinegar and water (1: 2) in such a volume that the active liquid completely covers the heating element. As a result, a very stormy chemical reaction accompanied by the release of carbon dioxide. Bubbles will begin to form, which will destroy the thick layers of scale.

The method of cleaning an electric kettle with soda from scale, in fact, is not independent, it is used so that soda particles eat into plaque when boiling water, so that after reacting violently with acid, mechanical removal on the surface of the heating element by means of emerging carbon dioxide bubbles is ensured . For one liter of water, two tablespoons of soda will be enough.


Other ways

In addition to the three "kitchen" substances, other, rather unusual methods can be used for cleaning:

  • Brine. The brine left after pickled cucumbers or tomatoes can also be used for this purpose, because it contains citric acid. Having boiled the electric kettle with brine, you can also successfully clean it of plaque, the procedure is exactly the same - pour the brine, boil, wait until it cools down, pour it out, and wash the container. Cucumber pickle is also able to eliminate rust.
  • Soda. Quite an unexpected way to clean kettles from scale. Coca-Cola, Pepsi-Cola, and other similar drinks also help to cope with scale, since they contain phosphoric acid, which can cope with even a fairly thick layer of scale. It is not necessary to boil water at all, you just need to leave the electric kettle with soda for several hours. It is important to use only high-quality drinks, as they contain stable dyes that do not remain on the walls. If the teapot is white, then the drink used should not have a dye, otherwise the paint will still have to be removed.
  • Oxalic acid. This substance is not so often found on the farm, but it is no less effective than the above-mentioned remedies. If it is not available in its pure form, you can use a fresh bunch of freshly cut sorrel. The method of washing the kettle is standard, however, in the case of using a fresh plant, you need to wait longer due to the reduced acid concentration.

How to remove scale in an electric kettle with household chemicals

Naturally, one can use not only folk remedies, but also special household chemicals. Manufacturers of various compositions for household use could not ignore such a problem as the formation of scale in an electric kettle, so you can always find several products suitable for this purpose on the chemical products market. They can be in the form of liquid, powder and tablets.


The manufacturer, of course, can supplement them with their own instructions, however, on average, the method of using chemicals is reduced to 40 minutes of boiling water, in which a given dose of the agent is dissolved.

The compositions may contain different kinds acids (sulfamic, adipic), including those that can be found in your own kitchen.

As a rule, after the first use of special means, the sediment will begin to exfoliate and fall off in pieces from the inner surface. However, it is important to wash the inner container without fail and as thoroughly as possible, and the more active the substance, the more times you need to repeat the washing.

This should not be neglected, if citric and acetic acid are used in the food industry, then other acids can harm the body.

The use of strong chemicals is resorted to only if the pollution in the kettle is too great, and the scale layer is so thick that it cannot be amenable to standard methods.

Sometimes the owner of the device makes a choice in their favor, because he wants to achieve the maximum quick effect However, if the scale layer has increased over the years, and the kettle is still functioning and there is no desire to throw it away, even Antinakipin and other similar products will not cope with it on the first try.

In addition, cleaning agents are an extra harm to your health. It is much better to remember this problem in time and use the “light” types of acids that can be found in the kitchen than to poison the air in the room with chemicals later.

You can prevent the appearance of scale, even if you just regularly wash the inside of the kettle with a relatively soft washcloth and ordinary dishwashing detergent.

But if the kettle still turned out to be dirty, chemistry will be the most effective solution, only powerful active substances can quickly cope with an old and thick layer of plaque.

Scale (salt sediment) disrupts the operation of the appliance, and white and red flakes fall into the cup along with boiled water. At first this layer is just a white coating, then it turns into a stone that is difficult to remove. I will describe effective ways how to clean the kettle from scale at home.


  • Warn households that it is impossible to use the device temporarily.
  • Pour water up to the middle of the container.
  • Add active ingredient.
  • Turn on the device.
  • Wait at least half an hour.
  • Wash the interior thoroughly.

To remove old petrified plaque, use several methods at once or try again.

Traditional effective methods


Cleaning an electrical appliance at home is easiest with the help of improvised means:

  • Soda - softens salt deposits.
  • Acids - dissolve even hardened scale.
  • Brush and sponge- will not damage the surface of the kettle walls, like their metal counterparts.

So, the main sediment fighters are soda and citric acid.

Method 1: Baking Soda


Baking soda or soda ash will help restore cleanliness to any electrical appliances (plastic, metal, ceramic). There are 3 ways to descale the kettle with soda:

Image Description
Method 1 - with soda ash

Recipe for multilayer scale:

  • Fill the bowl with water.
  • Pour the powder at the rate of 1 tablespoon per 1 liter.
  • Boil and leave to cool.
  • Rinse the kettle, removing any remaining sediment.
Method 2 - with baking soda and vinegar

Recipe from a small layer of salts:


Method 3 - a powerful complex from soda ash and citric acid
  • Dissolve in a liter of water 1 tbsp. a spoonful of soda and 1 teaspoon of citric acid.
  • Pour the resulting solution into the device.
  • Next - boil and leave to cool.
  • Remove loose residues with a brush.
  • Wash the device thoroughly.

This method is not for plastic. Long-term contact with acid and alkali will destroy it. An aluminum kettle can also suffer.

Method 2: Applying Acids


Any old deposits will easily remove acids:

Acid Application

Vinegar

For cleaning metal, ceramic and glass kettles:

  1. Prepare a solution: ½ cup of vinegar to 1 liter of water.
  2. Bring the solution to a boil.
  3. Leave for an hour to loosen the sediment.
  4. Wipe the appliance with a sponge, removing the remains of the salt layer.
  5. Wash thoroughly.

The disadvantage of this method is the unpleasant smell in the kitchen from vinegar. Ventilate.


2 types of citric acid are used: powder and lemon.

Cleaning instruction:

  1. Dissolve a teaspoon of powder in 500 ml of water or cut sour fruit into 4 parts.
  2. Turn on the electric kettle.
  3. The next half hour is the time for cooling and softening the plaque.
  4. Clean up leftovers sponge.
  5. Rinse.

The bonus of the method is the refreshing lemon scent.


Cleaning the kettle from scale with oxalic acid:
  1. Pour the powder into the device, about half a cup.
  2. After 10 minutes, fill it with water.
  3. Boil.
  4. Wash thoroughly plenty of water.

With a slight coating, you can use fresh sorrel: boil a few leaves.


Lemonade contains phosphoric and citric acids, liquidating sediment:
  1. Shake it up carbonated drink.
  2. Pour into the teapot.
  3. Turn on device.
  4. Leave to cool.

Organic peel acids an electric kettle will get rid of scale from an apple:
  1. Peel an apple from the peel.
  2. Fold up cleaning into the device.
  3. Pour in the water and boil.
  4. Leave for the night.

Use this safe natural remedy once a week for prevention.

Method 3: combined (for a thick layer of scale)


After such a powerful attack, all scale will come off. This is a two-step cleanse:

  • Step 1: remove with soda and acid. Pour a little soda in a saucer, add any acid from the table. Treat the entire surface with a touch of the resulting slurry. Rinse after 10 minutes.
  • Step 2: Remove scale and odors. Cut the lemon into slices and place in the electric kettle. Boil water with lemon and leave for half an hour. Wash the device from loose residues.

A variety of household chemicals from scale


In addition to folk methods, you can clean an electric kettle using chemicals specially designed for this purpose.

Their main components:

  • Organic and mineral acids(citric, sulfamic, adipic).
  • Sodium tripolyphosphate- the main product from the processing of phosphoric acid in expensive products.
  • Soda.

These tools also solve the problem of how to descale an enamel kettle. Available in liquid, powder or tablet form. Use strictly according to the instructions so as not to damage the equipment.

The general scheme of how to get rid of scale special cleaners:

  • Prepare a solution.
  • Boil in a kettle.
  • Then pour.
  • Remove scale. Softened, it can be easily removed.
  • Boil clean water 2-3 times to flush out any remaining chemicals.

Conclusion

We found out that the choice of ways to remove scale in an electric kettle is quite large. Home remedies are not inferior in efficiency to industrial ones, verified! Check out the video in this article, and you can ask questions in the comments.