All photos from the article

Many have seen tables with tabletops made of sawn wood, but few know that such an unusual option can be made on their own. We will consider how the work is carried out, what components are used and what nuances should be taken into account in order to get the best result in the end. Of course, the process will require a certain amount of time, but in the end you will get a unique product that you are unlikely to find from anyone else.

What is needed to carry out the work

To carry out the work, you need to stock up on everything you need:

Advice!
No need to buy a grinder specifically for making a table, the easiest and most reasonable thing is to rent it for 1-2 days, such services are provided in most cities, just find the nearest company.

Process description

The technology of countertops made of wood cuts is significantly different from the usual options, so we will consider it in great detail, it is important to properly prepare and clearly follow all the recommendations, this is the only way to guarantee a positive result.

Preparation

Within the framework of this stage, the following list of activities is carried out:

• Cutting the material into thin saw cuts, it is very important to do everything as accurately and accurately as possible, the smaller the thickness of the fragments, the better they will be saturated with a protective compound and the less epoxy you will use. Best of all, if the saw cuts are about 1 centimeter thick, if you do not have cutting equipment, or you do not know how to work so accurately, invite a specialist with a chainsaw - he will quickly do everything necessary.

Basically, these will be coffee tables, original, different from what we are used to. In the selection there will even be wood along with bark, look!

I must say that the design of furniture has changed recently. It would seem that something new can be invented here? But no, maybe. The pieces of furniture are the same, but they look different.

The trend can be called "back to nature". How is it shown? Increasingly, untreated wood is used, natural bark, tree roots, cracked saw cuts are used. We are tired of artificiality, the coldness of glass and concrete of megacities, we want naturalness, naturalness, wildlife, warmth of wood.

Root coffee tables

In my house there is no such thing as a coffee table, for me it is an absolutely unnecessary attribute. It stands in the middle, next to the sofa, it makes it difficult to pass, it is inconvenient to eat behind it because of the small height, except to put a book or put a glass or a glass. Takes up space, accumulates dust on its surface.

But in many homes, it is an integral part of home furniture. So I'll tell you about them. The roots of trees often have a unique bizarre shape, tables are made from them. For example, here are.

Of course, it should be noted that the roots are more difficult to process due to their complex structure, curvature, but the result is worth it.

If in the tables we are used to everything should be smooth and tidy, then everything is exactly the opposite. The more ornate the roots, the more interesting the tree cut and the pattern of annual rings, the better.

There are some more examples of tables from their woody roots in another post. I was especially struck by one, a huge one, which served for cups and tea for breakfast at the hotel. It was something amazing, a solid interweaving of roots.

Even from such a round conglomerate of roots or solid wood, a table can turn out; a round glass tabletop is installed on it - a work of art is ready.

Tables from saw cuts with bark and cracks

A very unusual option with a glass top. The base is saw cuts of small diameter. It is noteworthy that a lot of things will fit inside the table under glass to decorate the appearance.

A fragment of the last photo is larger, how the saw cuts are laid:

Table made of saw cut logs at the base (fragment)

I also liked the tables of different sizes and diameters from wide cuts. As you can see, cracks are not a hindrance, they only give a special charm. Moreover, perhaps a rough wooden surface will not be used, round glass lies on top. On the cuts of the saw cuts, the bark is left untouched, this is a design element, this is a special charm.

Please note that in the photo below, the bark is used not only in tables, but also in the decor of other furniture. Wood cuts are now widely used for wall decoration - in kind or in wallpaper.

The gray glass top matches the sofa, a close tone is obtained from the fusion of gray and the color of natural wood on the saw cut.

A crack only decorates, and is not a flaw. The tabletop just rests on a saw cut, on a few round silicone things.

The bark is left intact on the cuts, this is a design element, this has its own special charm. In order not to cling to it, the diameter of the glass is made much larger, which, however, does not spoil the picture at all, but makes it more attractive.

Legs metal, cross.

Again bark, as well as cracks. Here they are not ignored, on the contrary, they are emphasized. They seem to be tightened so that the tree no longer cracks. :)

The top is perfectly smooth, polished, lacquered.

Such a table (it can hardly be called a dining table) struck me more than others. I haven't come across this yet. A tree trunk raised up, cut almost in half lengthwise. Bark, cracks - everything is available, only there are no roots.

Original table from half a trunk with bark

Original, impressive - yes. But to use this ... I personally would not. The entire structure takes up too much space, the usable area is not so large. But who has a large area, can afford it.

A couple more tables, not quite related to the topic, but nevertheless worthy of attention. It is difficult to say how and from what the first one is made. The texture and color attract attention. Glass rectangular plate on top. It seems that someone planned to make a table, but there were no suitable materials at hand, everything that was, what was found, went to the table.

The latter looks unusual due to the catchy decor - blocks of wood with a plant and metal details.

Slabs made of wood are wide longitudinal cuts of an integral section of the trunk. Massive slabs of elm, oak, poplar and other types of wood are used to make original furniture or as independent interior elements. Exposing the entire section allows you to most fully reveal the grandeur and nobility of the tree.

In the array, all the beauty of the natural texture is exposed: the nature of the strand, color transitions, the presence of knots and small defects. When processing slabs, the natural cut lines are preserved: the slab has a free geometry that follows the natural contours of a tree trunk.

Isn't there a substitution of concepts behind the fashionable term?

Indeed, one might think that the catchy foreign word “slab” is used as an unreasonable substitute for such well-established concepts as a solid board, solid wood, saw cut, wood plate and other terms that are more familiar to our ears. But it's not. The concept of slab does not have a full-fledged analogue in the Russian-language lexicon of woodworkers.

Key features of the wooden slab:

• plate thickness varies from 50 to 150 mm;
• a longitudinal cut is made from the lower part of the tree, which is characterized by a greater width and increased strength.
• a real slab is, by definition, a solid array, excluding gluing and the presence of other types of connections.
• the edges in the slab are left unprocessed or artificially emphasize their natural relief;
• in the slab, the emphasis is on the original lines of the tree: saw cuts are especially valued in places where the trunk branches or bends; the strict geometry of the array with processed edges is more of a variation on the slab theme.

A slab can be called not only longitudinal cuts of a tree, but also transverse cuts of the trunk. Small end cuts of logs that have undergone proper processing are used to make designer tables, bases for lamps and other creative things.

How are wooden slabs used?

The popularity of slabs is inextricably linked with the triumph of such a design trend as Live edge. In this style, which can literally be translated as "Living Edge" or "Natural Edge", furniture and other interior attributes are created. In Live edge, the emphasis is on the authenticity of wood and minimal interference with its natural forms: they preserve the natural geometry of the cuts, leave areas of the bark, emphasize the knotty, cracks, and graininess of the texture.

Massive tables, kitchen countertops, bar counters, cabinets and small coffee or coffee tables are created from a slab of wood. Thinner cuts are used for the production of chairs, stools, long benches (in this case, valuable species such as teak, etc. are especially in demand). Slabs made of oak, elm, larch and other tree species are used to create window sills, shelving, headboards.

A separate direction in the manufacture of designer furniture is the combination of slabs with figuratively cut glass or an epoxy resin layer. Typically, such solutions are used to create tables and countertops. The effect of the "flowing river" can be enhanced by adding phosphorescent additives to the epoxy resin.

The polyphony of ideas of wooden furniture from slabs can be found in the photo in our gallery.

DIY wooden slabs

Solid wood furniture is a very expensive pleasure, so the question of how to make a slab yourself is of interest to many who have access to deadwood. In our latitudes, oak, elm, larch, poplar, less often birch, aspen, and even pine are most often used for these purposes.

We wrote about the intricacies of choosing a tree, its transportation, dissolving the log into slabs and proper drying.

Dissolving a massive trunk (with a diameter of 1 m or more) on boards without the involvement of specialized equipment is an almost impossible task. This procedure is carried out directly in the forest on a prefabricated band sawmill using loading equipment.

It is more realistic to prepare a wooden slab with your own hands by choosing oversized logs for cutting. For these purposes, usually, mini sawmills are used - devices based on a chainsaw for the longitudinal dissolution of logs.

Drying and stabilizing the slab

An obligatory preparatory stage for such material is drying. It can occur in natural conditions or with the use of vacuum or infrared exposure in special chambers. The duration of this process depends on many factors: the type of wood, the thickness of the slab, its length and width, the moisture content of the wood.

During the drying process, drying stresses arise in the wood structure, which in turn provoke cracks, splitting and deformation of the workpiece. In the case of slabs, the probability of warping is much higher, because due to the large thickness, the outer and inner layers dry unevenly, which increases the drying stress. To minimize such risks, the surface of the slab is treated with special stabilizers that protect the wood from cracking and warping during the drying process. For additional stress relief, shallow transverse cuts are made from the back of the slab. But, again, the need for this is determined by the size of the slab itself and the type of wood.

How to process a wood slab for countertops and other products?

As a finishing coating for slabs, I use the widest range of finishing materials. The choice of the optimal coating depends primarily on the specifics of the operation of the product. Surfaces subject to intense wear, such as countertops, desks, etc., are coated with polyurethane, work surface oil, epoxy.

If you want to fully preserve the beauty of the texture and tactilely feel all the advantages of wood, it is better to refuse the finish that creates a wear-resistant film on the surface of the products. In this case, preference is given to a high percentage of solids or.

Have you ever wondered why wood has been an integral part of the interior of any apartment or house for many centuries? Because of what, among the abundance of competing materials, it still often wins and further decorates the facade of a building or the floor in your living room? The answer is simple - this is one of the few materials that only nature has created, and nothing can compare with its beauty!

From a solid tree trunk, you can make many useful and beautiful things. One of these is a do-it-yourself table made from saw cut wood.

Most likely, a completely fair question immediately came to you: How to make a table from a saw cut? This certainly requires special skills and equipment! Do not rush to conclusions. Below I will provide step-by-step information that may convince you of the opposite.

Design Choice

The design of the entire table can be divided into two components: the choice of table top and legs.

When choosing a countertop design, it is important to consider some features of your room and imagination:

• If you want a round or oval shape, then you must have enough space, because. it has an impressive size. Ideal for a large living room or hall, as well as in harmony in the gazebo;
• A small tabletop is a beautiful addition to a small living room;
• The rectangle shape is suitable for all occasions.

When choosing legs, rely solely on your taste. You can make a table with one, two, three or traditionally four legs.

How do you want to see the final version? This is a purely personal question and depends on your taste and preferences. If you want something unusual, but nothing comes to mind, you can look at photos of tables from saw cut wood and make everything according to the model.

Ideal material

Due to their inexperience, many people think that a saw cut for a countertop can be found in any nearby forest, but this is not so. You need a perfectly finished surface, without crackles and with a beautiful pattern, because. it is he who will decorate the entire structure

All material is best ordered in a specialized online store, where you can first find out all the necessary information.

So, for the right choice of material, follow some simple recommendations:

• The saw cut wood must be resistant to moisture and must be dry;
• Pay attention to the absence of knots, because during processing they can break off, thereby violating the surface;
• The tabletop should turn out to be durable and lightweight, so choose the right thickness, focusing on the size of the table;
• When buying materials, remember that the lower the price tag, the worse the quality. So that all the work does not go down the drain, it is better to overpay.

Necessary materials

Before starting work, we need to stock up not only with enthusiasm. To create a table from a solid saw cut of a tree, you must:

• Grinding machine with a knife of different grain sizes, gloves, a chisel and a metal brush. All this will be needed for the preliminary processing of the material;
• Saw cut and bars that will be needed for the legs;
• Circular saw - for cutting thinner saw cuts;
• Furniture screws and glue (carpentry) will help create the basis for the future masterpiece;
• Epoxy resin will fill in all cuts and bumps;
• Lacquer - to give a spectacular shade, as well as as an additional wood treatment.

Preparation

After you have prepared all the tools and material, you need to make a blank, i.e. carefully and as accurately as possible cut the whole saw cut into thinner ones. Their optimal cutting (thickness 1 centimeter) will allow very high quality treatment with a protective agent.

To give additional aesthetic beauty, the legs should also be processed, and if desired, even put a drawing on them!

Stages of work

To achieve your goal, stick to the following plan, it will allow you to create a quality table the first time.

Using a chisel, we eliminate irregularities, remove the bark with a metal brush, and eliminate roughness with a grinder and sandpaper of different grain sizes. This is very important to do in good faith, because this work directly affects the quality of the finished product.

Using furniture screws and a screwdriver, we create the supporting part. We connect the prepared elements with glue.

We are waiting for the complete hardening of the glue with resin. After that, we grind the entire surface, to give it a more expressive saw cut pattern.

And finally, the last step is varnishing. This will give our creation a unique shade and serve as processing. The varnish is selected according to your taste, natural oils are also used.

Outcome

So we have created another miracle that will delight you and all your guests. Don't be afraid to improvise to achieve a unique design. How to make a saw table? It's not difficult, is it?!

Photo of tables from saw cut wood