Chlorination is the most reliable method of water disinfection in large and small pools, which is used in more than 90% of cases. For these purposes, special chlorine-containing preparations are sold, but at home, store-bought products can be replaced with ordinary whiteness.

Despite the statements of skeptics, often representing the interests of commercial companies, it is possible to pour whiteness into the pool, but in order for the product not to harm health and purify water well, it is important to make calculations correctly, observe proportions and technology.

Theory. Chlorine and its compounds inhibit the enzyme systems of microbes, activating redox processes, which for a long time (in comparison with other methods of pool disinfection) purifies water from pathogenic microorganisms.

Advantages of chlorination:

• cheapness and availability;
• destroys most microbes;
• works long enough;
• chlorine can be used to clean not only water, but also other surfaces of the pool (bottom, walls, stairs), which reduces the risk of infection.

Disadvantages of using chlorine-containing substances:

• chlorine does not destroy spore-forming bacteria;
• gradually microorganisms get used to any preparation of this group, as a result, a sharp and significant increase in the concentration of the active substance (chlorine shock) is required for water purification;
• During disinfection, toxic chlorination products are formed, which must be filtered out.

Only active chlorine has disinfecting properties - part of the total chlorine contained in the water, which has not reacted with organic substances: bacteria, algae, skin particles, urine, sweat, etc.

After contact with organics, chlorine is called "bound" or "chloramine". This toxic, harmful substance is responsible for the pungent odor of pool bleach and irritates the eyes and skin. According to sanitary standards, water can contain no more than a third of combined chlorine. Water filtration and replacement is used to remove chloramines.

The disinfecting ability of chlorine-containing products directly depends on the pH level of the water. Normal values ​​are 7.2-7.6 pH. Higher levels not only reduce efficiency, but also produce an unpleasant chlorine odor near the surface of the pool due to the release of volatile compounds.

Another possible problem is the brown color of the water after chlorination due to the high iron content. Brown water is not suitable for bathing, and after replacement, you will have to use another method of disinfection, such as cleaning with hydrogen peroxide.

The level of active chlorine in the pool should not exceed 0.6 g/m³. The optimal values ​​​​are 0.3-0.6 g / m³. This indicator can be measured with special devices - testers. It is impossible to add bleach "by eye", otherwise the cleaning efficiency will be extremely low. Measurements should be made at least once a day, adjusting the indicators by introducing a new dose of the substance. At a concentration of chloramines above 0.2 g / m³, the water becomes unsuitable for bathing.

How to pour whiteness into the pool

Whiteness is a bleach designed to remove stains and disinfect surfaces. At home, the product can be used to purify water in the pool.

Attention! Only chlorine bleach is suitable, so read the label carefully before purchasing.

Technology:

1. Adjust pH to 7.2-7.6.

2. Heat water to 24-32°C.

3. Determine how many cubic meters of water are in your pool. This information is contained in passport data or calculated using formulas. To determine the volume of a square (rectangular) pool, multiply the length by the width and depth, for a round one, use the formula for the volume of a cylinder - multiply the radius squared by the height and Pi (3.1415926).

4. Find out the percentage of chlorine in the purchased whiteness (indicated on the label). Usually 2-6%, maximum - 10%.

5. Determine how many grams of chlorine is in one bottle. For example, 0.5 liters of 4% whiteness contains 20 grams of pure chlorine (500 * 0.04 = 20).

6. Calculate the right amount of whiteness for the pool using the following formula: selected concentration of active chlorine (0.3-0.6 g/m³) * pool volume (m³) / chlorine content in one bottle of whiteness.

For example, to obtain the maximum allowable concentration for a pool of 5 m³, 15% of the contents of a bottle of 0.5 liters of 4% whiteness are required (0.6 * 5 / 20 = 0.15).

If the volume of the pool is indicated in liters, then you need to take into account that 1 m³ is equal to 1000 liters of water.

7. Add the calculated amount of bleach evenly around the entire perimeter of the pool.

8. After 4-5 hours, check the concentration of active chlorine. Add more white if needed.

9. Check the chlorine content at least once a day, do not allow the indicators to go beyond the minimum values. Use filters actively.

10. If the concentration of chloramines (combined chlorine) exceeds 0.2 g/m³, change the water. The greater the load on the pool and the weaker the filtration system, the faster the water will become unusable.

Evgeny Sedov

When hands grow from the right place, life is more fun :)

Choosing a pool water disinfectant that is safe with the desired effect is not easy, because you will need to buy a drug that would give an impeccable result. The modern household chemicals market offers a large selection of these products, so knowing the nuances of choice is useful for every owner of a reservoir in a country house or suburban area.

What to do so that the water in the pool does not turn green

When summer comes, so that the water in the pool does not bloom, you have to use special preparations that eliminate turbidity. Due to the fact that the walls heat up very quickly, bacteria develop in the reservoir, which can cause discomfort from swimming and even lead to serious consequences and infection. Emergency measures can change the green color of the filling, and preventive measures can be used to maintain cleanliness when you need to change the water more often.

Both procedures are characterized by the use of special chemical-type products that destroy bacteria, preventing algae from blooming further. The most popular and effective drugs are those whose components are chlorine or its derivatives. Biological preparations or antiseptics based on hydrogen peroxide can become an alternative to disinfection.

How to purify pool water

You can choose an effective remedy for blooming water in the pool by the type of problem. If you need to get rid of algae quickly, choose drugs that act urgently. After getting rid of muddy water, you need to maintain the ideal condition of the reservoir with the help of preventive measures. Preparations alone will not be enough - you will have to keep clean, carry out thorough maintenance, clean pipes and parts so that mechanical impurities do not clog them, preventing bacteria from multiplying under favorable conditions for them.

Which anti-blooming pool cleaner to choose

A good result is given by a pool cleaner so that the water does not bloom, the format of which involves the use of tablets or liquid. These are the most popular preparations chosen by owners of home water bodies. Both classic chlorine-containing products and newfangled modern preparations are used for disinfection, which clean no worse, but do not give a strong odor and are safer for humans and animals. After any use of disinfectants, it is necessary to withstand 12 hours, after which you can swim again.

Swimming pool water purification tablets

Choosing the right and effective pool water disinfection tablets is easy. Here are the most popular ones:

• Longafor - tablets weighing 200 g, slowly dissolve, contain chlorine, which prevents bacteria from multiplying.
• Chlorgranulat - for an emergency measure, a dose of 100 g per 10 cubes is used, and for prevention - 80 g for the same amount.
• 5 in 1 - have the function of super filtration.
• Crystal Pool - brought in 2-3 pieces daily to maintain cleanliness.

Pool liquid against water bloom

An alternative to tablets is a liquid pool cleaner that works immediately, while solid preparations must dissolve in order to work. The main drugs used are:

• Froggy is an algicide that kills bacteria, algae, and fungus. Sold in 5 liters.
• Liquid active oxygen is based on hydrogen peroxide, which is a well-known antiseptic. Sold in 20 liters.
• Hydroperite - contains all the same hydrogen peroxide, but this tool is more concentrated, so you need to use it carefully, observing safety precautions.
• AquaDoctor - a German remedy, represented by a thick liquid, can be added to any reservoir.

Other pool disinfectants

In addition to tablets and specialized liquids, other means are used for the country pool so that the water does not bloom. These drugs include:

• The MAK-4 Intex system is a special float, inside of which tablets are placed. They gradually dissolve, getting rid of bacteria and fungi, preventing the growth of algae. Does not harm a person, so it can be used even for children.
• Copper sulfate - diluted according to the instructions, destroys mold, fungi and algae. You can clean it with potassium permanganate and sea salt - inexpensive means for changing the shade of water.
• Whiteness - This chlorine cleaner is popular as the easiest to use, but has the disadvantage of a strong odor. Chlorine preparations with bromine are no less effective, but they can cause allergies.
• Perhydrol or the Tair method for water clarification - combines chlorine and active oxygen, is used at a dosage of 700 ml per 1 cu.
• Installation of filters that will circulate constantly, purifying water from various types of contaminants. You can treat the reservoir with ozone, UV irradiation, ionization.

Prices for pool products so that the water does not bloom

It is possible to purchase working products against water bloom in the pool in specialized departments, household chemical stores, but it is better to buy in an online store where you can order a variety of chemicals at a bargain price. Their cost will be at the following level in rubles:

• filters, ozonizers, stabilizers - from 1500;
• algicides - from 700 per 1 liter;
• liquid oxygen - from 6000 for 20 l;
• based on bromine - from 1800 per 1 liter;
• vitriol, whiteness, potassium permanganate - from 500 per 1 kg.

Video: chemistry for water purification in the pool

Cold clear water is an excellent escape from the summer heat. You can swim in natural waters or in the pool. However, in the second case, problems are possible, one of which is that the water in the pool turns green. Consider with you what needs to be done so that the pool does not turn green.

At the same time, a slippery coating appears on the walls and bottom of the artificial reservoir, the surfaces are covered with yellow-green spots. You can't swim in this pool. Even worse, if you already have time to swim and feel the mucus on your body from the spoiled water. A similar problem can arise at any time.

Water can turn green for a variety of reasons. The main reasons for the reproduction of algae:

• Algae viability. Their spores are volatile, so these organisms multiply rapidly.
• Warm water heated by the sun. This is an ideal condition for algae and pathogenic bacteria.
• Still water. If the liquid is not sufficiently filtered, algae develop more actively. This can even end up clogging an inoperative filter.

Chemical imbalance. To destroy algae, chlorine-based preparations and algicides are used. The inefficiency of these funds is a reason to check the balance of water. Chlorine should not be more than 2 mg. The optimal indicator ranges from 0.3 to 0.6 mg. You also need to monitor the level of Ph - the norm varies from 7.0 to 7.4. Violation of the alkaline-acid balance leads to the flowering of water and the appearance of a disgusting smell.

Cloudy pool water can be corrected with specialized water chemistry.

Because of the algae, the water becomes cloudy, turns brown, and smells unpleasant. However, if the liquid remains clear but turns brown or green, the problem is due to excess iron. You need to adjust the PH level and get rid of the iron with the help of coagulants.

Water quality: requirements

Caring for an artificial reservoir is simple, but you need to know a number of rules:

Use special chemicals. If there are no water purification and filtration systems in the water area, it will become an ideal environment for various microorganisms, including pathogens of serious diseases. Moreover, their reproduction will occur quite quickly. The only solution in this situation is the use of special chemistry.

Watch the color of the water. The main requirement is transparency, and the shade of the tile does not affect the color of the water. Good water quality is ensured by pool water treatment systems. You will also be helped by a special service that controls the operation of the relevant systems. Specialists are obliged to maintain the bowl in a condition that meets hygienic requirements.

Keep the water clear

Notice the smell. It shouldn't exist! Uninterrupted filtration eliminates unpleasant odors. You can't do without such a service. It is better to use the services of companies with some experience.

Bathers' feelings are very important. Burning eyes and dry skin? So, you need to bring the water in line with the necessary parameters.

There are certain sanitary and epidemiological standards of what drinking water should be. They are applied to the water in the pool. At the same time, the maintenance of an artificial reservoir does not become cheaper or more expensive. In no case should you put up with greening or clouding of the water in the pool.

Do not ignore even a slight change in the transparency of the water!

As soon as you see a green tint, remember: this is not the norm, but a serious problem! It is undesirable to ignore it. Clean water is the key to the safety of bathers!

The last resort is to take a sample of the water in the pool and laboratory analysis. But this must be done with the help of good specialists who understand the features of your water area. This will help you and your family avoid a lot of trouble. However, here you need to remember about the corresponding price of services.

Particular attention should be paid to those parts of the pool where you often visit. If you are annoyed by the strongest chlorine smell, this is a sign of the accumulation of dead bacteria and a small amount of active chlorine. It turns out that microorganisms are still dangerous for you and others.

Chemical requirements for pool water

The right decision when installing an artificial reservoir would be to purchase special measuring instruments. They will determine the properties of water in the water area. Such devices will allow you to control the general condition of the water and the acid-base balance.

These testers often come with tablets to create a chemical reaction. As soon as the water has acquired a certain shade, it is compared with the indicators of the color scale of the tester.

It is advisable to use special testers to determine the composition of water
Compare the performance of the tester with the water in your pool

The normal alkaline-acid balance for outdoor pools is 7.0 - 7.6. If it decreases, the water is highly acidic. As a result, irritation appears on the skin of bathers, and the walls of the reservoir begin to deteriorate.

An increase in indicators allows us to classify water as an alkaline type. This is a favorable condition for flowering and reproduction of microbes. However, the situation can be easily corrected by purchasing specific reagents that normalize the composition of water.

Prevention methods

Cleaning the pool from algae is a long and time-consuming task. Therefore, it is better to take some preventive measures than to get rid of the flowering that has already occurred. However, the color of the algae is not always greenish, so you need to pay attention to the signs of imminent flowering:

• Slipperiness of the walls of an artificial reservoir.
• The appearance of foam on the water.
• The appearance of a specific smell.

Settled dirt at the bottom of the pool

If you notice one or more of these "symptoms", it's time to take drastic measures. However, not all means have the desired effect.

You can use bedspreads and awnings, but they do not protect the pool from flowering. Such coatings are good so that large debris does not get into the water area. However, spores are not held by tents due to the small size of the former.

Chlorine preparations are necessary, but they must be combined with other substances. Otherwise, a dense shell appears on the algae, protecting them from the action of chlorine.

However, certain rules allow you to avoid flowering:

• Active filtration of pool awnings.
• The filter should be washed back periodically.
• Timely replacement of cartridges when clogged.
• If the pool operates in difficult conditions, round-the-clock operation of the filter is allowed.
• The use of chlorine preparations in combination with algicides (agents that destroy algae);
• Avoid over-stabilization of water. For a similar purpose, stabilized chlorine must be alternated with non-stabilized (developed using calcium hypochlorite).

What to do if the water has already bloomed?

The methods of struggle are determined by the stage at which the owners decided to deal with the trouble. Water is simply drained from children's inflatable containers, the walls are cleaned. Then for some time the product is kept in the sun, after which it can be filled again.

Real "adult" pools are harder to clean. Then the cleaning of the container is done without a new filling. Usually you need to disinfect the tank and recirculate.

Disinfection is carried out by adding algaecides to the container. As a result, algae stop growing. However, in this case, pathogenic bacteria do not die. They are destroyed with the help of preparations containing chlorine. It is sold in various forms - liquid, powder, tablets or granules.

The main condition is to observe the dosage, depending on the volume of the water area. If bathers experience discomfort, reduce the dose or change the drug. Bathing should give a person pleasure, not trouble.

Tablets are considered the most effective way. They are thrown into the water - foaming occurs. The foam is removed by filtration. Specialized bottom vacuum cleaners are also used.

Recently, a method of adding perhydrol (hydrogen peroxide) to water has been widespread. It is not worth using hydrogen peroxide from pharmacies, since the percentage of its concentration is extremely small. Use rehydrol in plastic cans. It can be found in pool specialty stores or some hardware stores.

Rehydrol concentration for the pool:

• 30-40% rehydrol - 0.7 l. peroxide per 1 ton of water;
• > 40% rehydrol - 0.5 l. peroxides per 1 ton of water.

The “lifetime” of hydrogen peroxide depends on the quality of the water. On average it is 2-3 weeks.

The process of cleaning the pool requires the contractor to comply with certain measures:

• For a while, you should put on old worn out clothes: drops of chlorine can spoil the color of the fabric - white spots will appear on it.
• A water sample is available even in stores that sell swimming pools - the service is provided monthly and even with computer diagnostics. Then you can solve problems in the early stages.
• A special net is needed to remove leaves and debris. The procedure is performed every day. Thus, the owners save themselves from the need to periodically carry out more complex work.
• Chlorine is kept at a dose of 1 - 3 million. As a result, algae stop developing.
• Do not add unfamiliar substances to the container! Only well-known cleaners should be used. Otherwise, new problems will arise!
• Mixing water with chemicals requires extreme care. Chemicals are added to water, but not vice versa.
• Mixing of chemicals is not allowed under any circumstances! Otherwise, an unpredictable chemical reaction can be achieved.
• Contact with chlorine means you need to be extremely careful. Otherwise, the “experimenter” will have a sore throat, cough and irritation of the mucous membrane of the eyes, as well as skin and lungs.

In contact with

Folk ways to deal with flowering water in the pool

Gradually, pools are becoming commonplace in summer cottages. Open options for swimming facilities are especially popular. In the pool, it is not always possible to maintain the ideal purity of the water, so it may begin to bloom.

The flowering of water is accompanied by a green color and the appearance of an unpleasant swamp smell. Water turns green for several reasons:

Causes of water bloom

In order to understand how to get rid of flowering, you need to know the reasons for its occurrence:

1. Seaweed. These are spores of unicellular and multicellular microorganisms, which spread with amazing speed over vast distances and multiply without limit. Their ability to survive is programmed by millions of years of evolution. The water in the outdoor pool is warm, and this is the ideal environment for them. In addition, not every filter has a spore delay mechanism.

If you use chlorinated tap water to fill the tank, then the process of reproduction of microorganisms proceeds more slowly. If you use well water, then there are already algae spores and the water may turn green immediately after the reservoir is filled. In indoor pools, the risk of their occurrence is much lower, but still present.

1. Intensity and quality of filtration. Algae breed in tanks of stagnant water. Therefore, if the filters are weak or clogged, then the risk of flowering is much higher. Where filter devices are rarely cleaned and changed, microorganisms multiply directly in them.
2. Chemical additives. Water chlorination is used to control flowering. If the concentration of chlorine is less than normal, then the water will bloom. In order for the water not to turn green, it is necessary to monitor the acid-base balance. The normal value for country pools is pH 7-7.4. If it is less, then the effectiveness of chlorine is reduced.
3. cyanuric acid. It is present in many chlorine disinfectants. The acid works in two ways. First, as an additive to chlorine preparations, it stabilizes their action and prevents the destruction of chlorine from ultraviolet rays. Secondly, when its concentration reaches a certain level, cyanuric acid neutralizes the effect of chlorine. Then you can clean the green tank only by a complete replacement of water.
4. Iron. The presence of green water in the pool may indicate not only algae. If it turns a little brown, but does not exude an unpleasant odor, then the problem is an excess of iron. It is necessary to change the pH level, and remove the iron with the help of coagulants.

Ways to deal with algae

Conventionally, cleaning methods can be divided into technical and folk.

Technical ways

1. Filter installation. Ineffective method of combating water bloom. Most filters do not capture plant spores. Those that can do it are expensive and require constant cleaning and replacement of modules. In outdoor pools, even the most expensive filter elements will not give a hundred percent result, because algae spores come from the street.
2. Ultraviolet. It will help get rid of impurities. If the water has already bloomed, then ultraviolet rays will not be able to penetrate the green suspension. Plus, they do not destroy green deposits on the walls of the pool.
3. Water ionization. A low voltage current is passed through the liquid. It releases copper ions, which negatively affect the development of algae.

Folk ways

Cleaning is carried out without the use of specialized and expensive equipment. What to do so that the water in the pool does not turn green using folk remedies?

1. Water change. The only possible effective way to quickly and efficiently clean the inflatable pool. Old water is replaced. To do this, use a small electric pump or a regular bucket.

Important! What to do to avoid constant water changes. You must use tap water that does not contain spores. They can only get in from the street. There are already algae spores in well or tap water.

1. mechanical cleaning. The easiest and most affordable folk way. Algae sticks to the walls of the tank. They can be removed mechanically. It is necessary to drain the water from the pool bowl. Then, using a cleaning agent and a brush, wash off all deposits. In rubber pools, this must be done with caution. Many cleaning products can damage the walls. After processing the walls, the bowl is dried for several hours.
2. Copper vitriol. An effective and proven method of maintaining acceptable water clarity. This chemical element performs several functions:

• Kills all algae.
• Kills the fungus and its spores.
• Helps to remove small growths from the walls of the pool.

Important! Copper sulfate is a dangerous element that, if not used carefully or in the wrong dosage, can cause serious chemical burns on the skin. That's why you need to carefully read the dosage on the package.

To remove algae, copper sulfate is diluted with a small amount of liquid. The solution thus made is poured into the pool. The concentration of copper powder should not exceed 0.9 g. per 1000 liters of liquid. You can improve the effect if you mix table salt with copper sulfate 3: 1. To prevent water blooming, copper sulfate is mixed with peat, poured into cloth bags and lowered into water.

Important! It must be remembered that copper sulfate does not destroy pathogenic bacteria and microorganisms. For these purposes, it is better to use chlorine or bromine.

A solution of copper and table salt will greatly reduce the turbidity of the water and help remove algae from both the liquid and the walls of the pool.

1. Blackout. There is a direct relationship between the amount of algae and the intensity of sunlight. The more hours a day the pool is heated by the rays of the sun, the more often the water will bloom, and the algae will multiply more intensively. Therefore, outdoor pools are recommended to be darkened. To do this, trees are planted on one side. It is possible to build a water structure already taking into account the blackout.

Important! To prevent the water from blooming, it is necessary to reduce exposure to direct sunlight to 3-4 hours per knock. If you darken the pool completely, then the water will not have time to warm up. This may affect the comfort of people bathing in it.

To remove algae and reduce the intensity of water bloom in small pools, it is enough to use folk methods. In the case of large waterworks, cleaning options must be combined. In any case, the more closely you monitor the quality of the water in the pool, the better it is to swim in it.

One season a year, all people feel the influence of the scorching sun. Sometimes it's so hot in the summer that you want to take a bath, fill it with ice and spend several hours in it. But, there is another way to spend summer days in comfort. It's about the pool. Residents of private houses who have spared no expense for the pool are very happy with their investment. However, from time to time each of them is faced with an unpleasant phenomenon - green water in the pool. It is clear that none of the family members wants to swim in such an environment. Therefore, on the forums you can often see the question: the water in the pool turns green, what should I do?

And really, what to do when the pool is green? In fact, this is a common occurrence, which is quite easy to deal with. This article will discuss several ways that will help not only deal with blooming water, but also make sure that water does not bloom in the future.

Why does the water in the pool begin to bloom

Before dealing with the consequences, it is important to focus on the source of why the water blooms. After all, nothing in this world is done just like that. It all comes down to the fact that the water in the pool is there for quite a long time. As a result, the water in it may become cloudy. Here are the reasons for green water:

So, we have considered the most common reasons that contribute to water pollution in a frame or stationary pool. Having learned only them, everyone begins to understand how to solve this problem. Since there are many root causes, there are also many solutions. Let's take a look at these tips to enjoy swimming in a clean and safe pool.

Ways to deal with green water in the pool

Generally speaking, all methods can be conditionally divided into several categories. They differ in many factors, but are effective in their cases. Some remove the original source, like special means and tablets from microorganisms, while others prevent their appearance, and still others will help overcome the consequences of their life. Here are the ways:

• mechanical;
• filter installation;
• chemical.

How does each of them work? All options need to be considered.

Note! Sometimes it is not enough to use one of the above methods. It is important to combine them in order to achieve maximum effect. Then the waste products of bacteria will be removed, they themselves and the color of the water in the pool.

Water purification mechanically

Here you can not do without the hands of the owner of the pool. It depends on him how clean the pool will be. Everyone knows that algae stick to the walls and bottom of the structure. If the water in the pool turns green, then you first need to clean it. To do this, two methods are used:

1. Removal of dirt with a scraper, brush and detergents.
2. Purchase of a vacuum cleaner for the pool.

The first option is simple, cheap, but requires effort on the part of the owner. All work is to clean the walls and bottom of the pool from algae. But, first of all, he must drain all the liquid from the tank. Only then can you start a full cleaning. You will have to take the time and be patient in order to remove all the algae. The work is not difficult, but monotonous.

Advice! With PVC pools you need to be careful. It is important to ensure that the brush or product does not damage the surface. Otherwise, you will also have to deal with the repair of the tank.

As for vacuum cleaners, everything is much simpler here, but more expensive. It is enough to purchase a device for cleaning the pool, like a conventional vacuum cleaner, which will do its job with high quality. It is noteworthy that on sale you can find three options for products:

• manual vacuum cleaner;
• semi-automatic;
• Robot Vacuum Cleaner.

Accordingly, the first option is the cheapest and easiest. The advantage of all vacuum cleaners is that you do not need to empty the tank. The manual option will remove contaminants and purify the water inside. As for semi-automatic vacuum cleaners, they work without human intervention, remove dirt and filter water. You just need to turn the unit on and off. Robotic vacuum cleaners are the most expensive. They are launched into the water, after which they independently clean the walls and bottom of the pool, filtering the water. You can see this in the next video.

Now that the pool is completely clean, it is important to prevent the appearance of these microorganisms so that the water does not turn green again. How to do it? Install filter.

Installing a filter in the pool

No tank can function properly without a quality filter. The owner must understand this. And if it was not previously installed in its place, then it is important to take care of buying such a unit. Indeed, thanks to him, you will not have to observe green water in the pool. Due to the work, no microorganisms will form inside. In addition, all dirt, epidermis, secretions, etc. will be removed. Then swimming in the pool will be not only pleasant, but also safe.

It remains only to choose the type of filter, consider its characteristics and cost. After all, as mentioned above, with insufficient filter power, it will not be possible to get rid of green water in the pool. Before buying, they look at the amount of liquid that the unit processes per hour. And the larger the pool, the more powerful the filter will be required. Here are some types of pool filters:

It remains only to allocate funds and purchase a suitable unit.

Note! There is a so-called method of water ionization. It lies in the fact that a small voltage current is passed through the water, which contributes to the release of copper ions. And they will negatively affect the growth of algae.

The use of water treatment chemicals

Perhaps this is one of the simplest, fastest and most effective ways that are available to the user. A lot of means are provided for armament, which remove microorganisms and the consequences of their vital activity in the pool. Can be used:

1. Bleach.
2. Products containing bromine.
3. Hydrogen peroxide (not ordinary, but perhydrol - concentrated peroxide).
4. Copper vitriol.
5. Algicide.

Instructions for use can be found on the packaging itself. Usually the product is diluted with water and added to the pool. Chlorine, for example, removes all microorganisms and purifies water. Perhydrol does the same, and the water after its use becomes transparent. Only peroxide does not affect human skin so much, and this is a big plus.

Separately, I want to talk about algicides. These are chemicals that are specifically designed to combat green water. They remove any type of algae. Unlike bleach, it is harmless to humans and is an environmentally friendly product. Able to remove mucus from the bottom and walls, eliminate fungus, algae and other microorganisms. We suggest considering 4 algicide products that you can buy in the store:

Note! It is not necessary to use algicides regularly. With their help, you can eliminate all microorganisms and continue to use other methods to prevent green water.

Summing up

Faced with such a phenomenon as green water in the pool, it is not necessary to sound the alarm. As you can see from this article, there are many ways to solve the problem. And thanks to the variety and different price categories, you can choose the right option for everyone. Combine methods, clean pools and do everything to prevent this from happening in the future.