On the modern market of thermal insulation materials, the most affordable and effective is. With low cost and increasing demand for thermal insulation, this material is taking the leading position in insulation for the finishing of buildings and structures.

The latest technologies for saving energy, heat, light and other benefits of civilization are becoming increasingly popular in almost all areas of human activity. To a greater extent, this can be attributed to the construction industry.

The use of simple, affordable and safe technologies in the construction of buildings reduces construction time, the cost of housing and increases energy efficiency.

Material advantages

These latest developments include penoizol, which has excellent insulating characteristics, the ability to completely occupy empty space, and ease of use.

Penoizol has good fluidity, which allows it to fill all voids, providing sound and heat insulation, does not burn and does not emit harmful substances.

Thanks to these qualities, the material can be used not only during the construction process, but also in already constructed buildings. Penoizol, when used, does not grow in volume and does not destroy walls.

After pouring, the material hardens and becomes solid, which facilitates the construction of temporary and light premises, which can later be moved to another location, this includes, for example, small warehouses and retail kiosks.

Composition and application

The main component of penoizol is a polymer - urea resin.

To make penoizol, use:

• polymer urea resin;
• hardener;
• foaming agent;
• water specially prepared for the process.

Ready-made penoizol is very similar to a soufflé. Coming into contact with air, it hardens, filling voids in building structures, thereby creating the effect of heat and sound insulation of the room.

The production of penoizol can be started using existing ready-made equipment or assembled with your own hands according to drawings. Ease of use allows you to work with penoizol all year round, without being dependent on climatic conditions. This material can be used to insulate roofs, floors, walls, foundations and partitions.

The manufacturing process itself is not very difficult, so you can prepare the insulating material at home. Having modest experience in construction, the necessary knowledge and high-quality installation, producing is a real challenge.

Equipment for the production of penoizol consists of:

• pump for supplying solution;
• foam pump;
• foam generator;
• compressor;
• power supply.

The production of penoizol for sale to third parties or buyers can be established indoors, but an effective option (saving on transport services) would be to produce it directly at the construction site, using a foam generator.

The modern market is represented by different manufacturers. A wide selection of Russian and Ukrainian equipment (Pena-2000 DMU, ​​Pena-2000 10/UM, Pena-2000R) is presented to the attention of the entrepreneur who decided to start producing penoizol.

Foam insulation installation Pena 2000 DMU You must immediately decide why you are purchasing the installation. If you plan to insulate your home and several objects for your relatives and friends, then it is not necessary to purchase expensive equipment, but try to fit within a small budget.

Alternatively, you can make a gas-liquid or pneumatic-hydraulic installation yourself.

Self-installation of the installation

Foam concentrate drawing. (Click to enlarge) On the websites of manufacturers involved in the manufacture of equipment for the production of penoizol, you can purchase installation drawings and learn the production technology.

By purchasing such a package of documents, you can assemble this device yourself, especially since spare parts are always available.

A budget option would be a self-assembled structure consisting of:

• gas-liquid installation;
• set of taps;
• supply hose;
• compressor for producing compressed air;
• plastic barrels up to 300 l.

The process of obtaining insulation is based on the principle of foaming solutions with a catalyst and mixing it with urea resin. Using a pump, the components enter the installation, where they foam under the influence of compressed air.

Diagram of a foam insulation installation. (Click to enlarge) One of the main system components in a gas-liquid installation is the pump, so it is better to purchase a quality pump.

These pumps also have problems with the electric motor. The declared power may not be enough to supply the finished product to fill voids.

Take into account: When choosing pumps for installation, it is necessary to take into account errors in dosage, errors in engine speed instability depending on voltage and load.

It is more profitable to use plunger pumps or vortex pumps. Here it is no longer possible to make a mistake with the dosage, but if solid particles enter, the entire work process may be disrupted, from a failure in the dosage to a breakdown of the unit.

Keep in mind: When choosing a plunger or vortex pump, you must definitely consult about the material from which the internal parts are made. It is desirable that it be nickel plated, stainless steel, ceramic or plastic.

It is also advisable to purchase a high-quality plunger pump for supplying foam. Foam is formed using a high expansion foam generator at low pressure. The output is foam with a beautiful fine-cell structure.

The most effective method today is double foaming. At the outlet, Penoizol appears as a dry mass, which makes it possible for it not to leak out of the cavity being filled.

The compressor on the equipment must be installed with a certain capacity. Be sure to pay attention to the resin consumption; it should be no more than 25 kg in order to obtain a quality product.

Ready-made penoizol In an installation for the production of penoizol, it is necessary to create an optimal ratio of all components to distribute the insulation throughout the entire filling volume.

The final product should be white and, when pressed, should return to its original shape.

As an insulating material with low cost and high insulating properties, penoizol is beneficial for your own production. Having assembled the equipment according to the drawings, you can open your own small business and start earning money.

Watch the video, which shows in detail the stages of work on equipment for penoizol, made by yourself:

Today, the construction market offers a large number of materials that are used as insulation. Penoizol is popular among them. It is also used for sound insulation. Manufacturers of penoizol receive quite a large profit, but in order to start a business, it is necessary to purchase special equipment for penoizol.

Is it profitable to produce insulation?

Penoizol comes in two types: liquid (produced at the construction site) and ready-made (produced according to predetermined dimensions). Penoizol contains four components: tap water, foaming agent, curing catalyst and urea-formaldehyde resin. To make penoizol, you will need special components.

Penoizol is produced using a gas installation (all the necessary components are mixed in it), a compressor, molds for penoizol and additional equipment (ventilation, lighting and other devices).

The production of penoizol requires little material resources. Even a novice businessman can purchase new equipment. The cost of equipment is affected by the level of equipment performance.

Advantages of penoizol production:

• Opportunity to become an individual entrepreneur with an organizational form of ownership.
• You can pay taxes using a simplified scheme.
• To open a production workshop, you will need to rent a room of 60 sq.m.
• Buyers will be construction companies, shops and private consumers.
• To start a business you will need only three workers.

To start a business producing this material, you must be registered as an individual entrepreneur. A new enterprise must be registered with the tax service. This business is beneficial because it will be possible to pay taxes according to a simplified scheme - only 15 percent of all profits.

Manufacturers involved in the production of penoizol often post drawings on their websites, according to which you can install equipment for the production of insulation. Having a package of documents in hand, everyone can assemble the equipment with their own hands, without resorting to outsiders for help. You can also assemble a budget version of the design, which includes: a gas-liquid installation, a set of taps, a supply hose, a compressor, and plastic barrels.

Penoizol is obtained by foaming solutions with the addition of a catalyst and urea resin.

The components are installed in the installation using a special pump. The installation contains compressed air, which foams all components. A very important component in production is the pump. That is why when purchasing, experts advise paying special attention to its quality.

Tips for choosing the right equipment:

• When choosing a pump, it is necessary to take into account dosage errors. You should also take into account the possibility of instability of motor speed.
• The use of a plunger or vortex pump is considered profitable and effective. However, it is worth noting that the ingress of foreign objects and particles can negate the entire manufacturing process.
• When choosing a pump, you should pay attention to the materials from which the pump parts are made.
• The best pump that supplies foam is a plunger pump.

The most effective way to produce penoizol is double foaming. At the final stage of production, the manufacturer receives a dry mass that does not flow out of the cavity that is filled. When choosing a compressor, it is important to pay attention to its power.

DIY materials

Penoizol is a brand of insulation that is made from foamed and then hardened resin (urea). The production of penoizol is fast, cheap and effective. If high-quality components and their correct ratio were used to manufacture the material, then private and residential buildings can be finished using the resulting insulation.

To insulate your home yourself, you will need a foam insulation installation and some additional equipment.

Making penoizol yourself is simple, accessible, economical and quick. Affordable and safe technologies significantly reduce construction time and the cost of insulation. Penoizol is distinguished by its ability to penetrate deep into voids, filling them. It is easy to apply and provides excellent thermal and sound insulation.

Materials required for the manufacture of penoizol:

• Urea resin (polymer);
• Hardener;
• Foaming agent;
• Water (it is specially prepared).

Penoizol is usually produced using existing equipment. But if you don’t have it, you can assemble it yourself. For production at home, you will need a pump that will supply the solution, a pump that supplies foam, a generator, a compressor, and a power source. It is best to produce penoizol on a construction site using a foam generator.

Equipment for the production of penoizol

Penoizol insulation today uses two technologies. The first involves the production of mats, sheets or crumbs in stationary conditions. Filled penoizol is made directly on the site where the insulation will be carried out.

Conventionally, all equipment for the production of penoizol is divided into two types: for the workshop and for construction.

In order to be able to work with equipment on a construction site, it is important to pay attention to the requirements for its main characteristics. Installation should be easy and stable. The filling radius of the equipment should be large, this will make it mobile and make the manufacturing process more efficient.

Equipment options:

• GZHU (gas-liquid installation). The device is simple and easy to use, and also has a low cost.
• Second generation systems. They have a wide range of action.
• Installation "Standard". It features an original dosing system.
• "Foam-2000"

You can make an installation for the production of penoizol yourself, but this requires an exact diagram according to which its assembly will be carried out. Sometimes penoizol has to be produced directly on the construction site. You can make high-quality material yourself if you have purchased or assembled powerful and high-quality equipment for this purpose. A homemade device will work no worse than a purchased one if you assemble it according to all the rules. Raw materials for penoizol can be purchased in specialized stores.

How to make polyurethane foam (video)

Today, the place of polystyrene foam, expanded polystyrene and other materials is taken by penoizol. The material is made from inexpensive materials, which during processing are transformed into an effective means for insulating rooms. Penoizol or PEN resembles polyurethane foam in that it easily fills empty space. Penoizol production is a great way to make money. To do this, you always need to develop a business plan and invest money in the necessary equipment. Manufacturing is a great start to a business, comparable in ease to opening a car wash/

Equipment for penoizol

Equipment for penoizol

Installations for the production of penoizol

The market for equipment for the production of urea foam plastic is full of offers of installations of various types and price levels. Everyone positions their equipment as professional.

Let's first define how we understand the word “professional”. Most manufacturers claim that they make equipment for professionals, i.e. people involved in the thermal insulation business for more than one year.

We make equipment with which a beginner can do the job. Moreover, it’s better to do it professionally and get penoizol than from a professional. This is the fundamental difference in approaches.

Believe me, anyone who has been producing penoizol for many years will not buy someone else’s equipment. He had already made it himself. And he likes it so much that he is ready to sell it, forgetting that no one else can work on this equipment except him. And if suddenly a professional buys this equipment, he will remake it in such a way that the manufacturer will not recognize his product. Customize the equipment to suit your method and style of work. This is true. A real professional will be able to obtain normal material using a water mixer. This is art and the highest professionalism. There are few such people, but they do exist.

You, I think, came up with the idea of ​​penoizol not in order to become “artists” in the high sense of the word, but to make money. Therefore, those who are just starting to produce foam plastic absolutely do not need equipment with wide adjustment capabilities (productivity, proportions). These features only confuse the beginner. I'll show you with an example.

Obtaining material of different densities.

There are installations whose manufacturers claim that they can produce penoizol of any density.

FOR WHAT?

Experience shows that it is cost-effective to produce penoizol with a density of 12 kg/m3 and below. Those who make money in this business work with precisely these material densities. The “Flow” setting will allow you to obtain such material without any adjustments. I pressed two buttons and got it without bothering myself with complex calculations. We did these calculations for you.

All the additional features that our competitors include in their installations for the production of foam plastic are needed only by experimenters, and are almost NEVER used in real work. They confuse beginners and turn off professionals. So decide what you want: make money or experiment?

Yes, I forgot. Additional taps and potentiometers on these installations are also needed for ADVERTISING. Moreover, there is no higher quality penoizol produced on Potok series plants.

The installation for the production of penoizol "Potok-12" operates on an alternating current network with a voltage of 220 V and is equipped with a built-in compressor.

Imagine a situation when you arrive at a customer’s site (at a dacha, for example) and ask where you can connect a three-phase compressor. And he shows you in the direction of the substation, about three hundred meters away. How many private houses and summer cottages are supplied with 380V? How many clients will you lose because you use equipment that cannot operate on 220 V?

Is there a way out? There are two of them.

Buy a 10 kW gas generator. And all problems will be solved, complete autonomy. Yes, you will need a Gazelle to carry a gas generator and a compressor. But then it will be very convenient. Don’t forget to add the price of a large compressor, generator and Gazelle to the price of a cheap installation for 19 thousand rubles.

Compactness.

In order to carry out work on site, you need a passenger car for transportation. The installation takes up no more than a third of the Zhiguli trunk volume and there is still room for components.

Try saying no.

Our original patented mixing and foaming system.

It is this that allows you to use a low-power compressor at 220V. Why do you think our competitors don’t take advantage of such an obvious advertising advantage? The trouble is that their installations are not capable of producing foam with a small amount of air. Therefore, a compressor with a capacity of 500 l/min is required. at 380V. Do the math yourself. Let's multiply 500 liters by 60 minutes. We get 30 m/cu.m. air per hour. This is with a declared productivity of 5-10 cubic meters. As a result, in the material produced using such foam generators, due to excess air, cavities and large bubbles of different sizes are formed, with walls of different thicknesses, which worsens the thermal insulation properties of the foam insulation.

The difference between the material obtained on our Potok series installations is a uniform structure, tiny bubbles with walls of the same thickness, the absence of cavities and cavities and, as a result, the highest thermal insulation qualities. (See properties of penoizol)

The construction industry has always attracted budding entrepreneurs. It’s not surprising - many areas here do not require special skills or large expenses. If you decide to start your own business in this direction, be sure to consider the idea of ​​producing and selling penoizol. The main advantage of this area is the demand for this material among consumers in the construction market. In addition, in order to buy equipment for the production of penoizol and prepare a small workshop for work, large infusions of investment are not required.

Our business assessment:

Starting investments – from 100,000 rubles.

Market saturation is low.

The difficulty of starting a business is 5/10.

Penoizol is a heat-insulating material belonging to the group of foam plastics. But this material differs for the better from its “progenitor” in terms of quality characteristics. This explains its popularity among builders. Penoizol is characterized by increased fire resistance, non-toxicity, ease of installation, and resistance to bacteria and microorganisms. The low price makes it accessible to private owners and construction companies.
There are few enterprises in Russia that supply penoizol to the market. Basically, these are large manufacturing companies producing thermal insulation materials. But it is quite possible for small businesses to “survive” in the market, since buyers in the regions are interested in increasing the number of offers. The low cost of equipment also makes this direction attractive. And for those who are tight on finances, you can plan to make penoizol yourself - expenses are reduced to a minimum.

The main disadvantage of the penoizol production business is seasonality. Peak sales are observed only in certain months of the year - from April to October. During this period, both private builders and large organizations begin to work actively.

What does an entrepreneur need to think about when drawing up a business plan for launching an enterprise that produces penoizol?

Options for organizing a business for the production of penoizol

One of the main advantages of the penoizol manufacturing business is the opportunity to choose one of the possible ways of business development. Each of them is characterized by its own advantages.

Penoizol can be produced in liquid and solid form:

• Pouring into hollow profiles. The work involves organizing a construction team and carrying out the process directly at the customer’s construction site. The services of specialists may be required for thermal insulation of constructed objects, installed pipelines and industrial refrigerators. The costs of organizing a visiting team are minimal.
• Plates. Obtaining sheet material is considered much more profitable, since the profit from sales is higher. This direction does not involve large expenses, since you can organize the production of penoizol at home. Even within the walls of your garage, you will be able to produce a small amount of material - no special permits from government agencies are required here, large areas for placing machines are not needed.

When the penoizol production workshop reaches the break-even point, you can think about expanding the business - start working in two directions at once. Having purchased additional equipment, the entrepreneur can cover all market segments. This will affect the increase in income received.

We study the technology of producing penoizol

The technology for producing penoizol involves the use of a small list of components. All raw materials are widely available on the market and are inexpensive. You will need:

• water,
• catalyst for hardening the mixture,
• foaming agent,
• urea-formaldehyde resin.

The exact amount of raw materials will depend on the specific recipe. An entrepreneur can either “come up with” the ratio of components on his own, or turn to specialists.

It would be great if an entrepreneur manages to develop a heat insulator with properties better than other materials on the market. This will increase the cost of the final product and serve as a competitive advantage

The installation for the production of penoizol carries out the following technological steps:

• The foaming agent, catalyst and water at room temperature are mixed.
• The resin for the production of penoizol is poured into another container - it will be supplied to the working solution under pressure.
• All components are mixed under the action of compressed air, and a soufflé-like mass is formed at the outlet of the apparatus.
• The semi-finished product is poured into collapsible molds.
• The mixture hardens within 30-40 minutes.
• According to the established dimensions, penoizol sheets are cut into separate slabs.
• The finished material can be coated with a protective composition based on liquid glass. This coating will give the final product additional strength and fire resistance.
• Penoizol is packaged and stored before shipment to customers.

To ensure a smooth process of manufacturing the heat insulator, the workshop will require the presence of 2-3 workers.

A simple technology for manufacturing a heat insulator allows you to buy equipment for the production of foam insulation with your own hands - even a non-professional who is far from the industrial construction industry can handle the job. When organizing a home business, be prepared for the fact that many operations will have to be performed manually. Launching a full-fledged workshop is much better in this regard - automated machines make the process easier and faster.

How to equip a work shop?

Mini production of penoizol as a business will require the purchase of technical equipment. The standard line for the production of sheet material includes the following set of equipment:

• compressor,
• gas-liquid installation,
• collapsible forms,
• containers for components,
• packing table.

There is no need to purchase a drying chamber, since the mixture hardens under normal conditions.

To produce penoizol directly on a construction site, you will need almost the same set of machines - with the exception of packaging tables and molds. A mobile gas-liquid plant and compact containers for mixing raw materials perform all the necessary technological steps. In terms of costs, the technical equipment of an “on-site” business will require less finance.

The price of equipment for the production of penoizol is low. It costs 100,000 rubles to fully equip a workshop. Even powerful equipment will cost no more than 300,000 rubles. It is possible to organize activities for the production of heat insulators on construction sites without spending even 70,000 rubles.

Where to set up a workshop for the production of penoizol?

Since the components used during the drying process emit harmful substances into the air, the entrepreneur will have to first prepare the work site for production.

In a workshop with an area of ​​no more than 100 m2, you can place all the equipment and organize warehouses for storing raw materials and finished products. You can rent a workshop of this size, depending on the specific region, for 20,000-70,000 rubles/month.

When preparing the found premises for the launch of production, the entrepreneur must comply with the following requirements:

• Availability of electricity, water, heating, sewerage in the workshop.
• Availability of a properly functioning ventilation system.

When starting a business for the production of thermal insulation on construction sites, you will not need to look for production space. The only thing that needs to be provided is a small room for storing equipment and inventory. A garage can also be used for this.

Financial plan for a business for the production of penoizol

To buy a plant for the production of penoizol, ensure a supply of raw materials and prepare the workshop for operation, you will need at least 500,000 rubles. A home business can be organized with slightly less capital investment - from 200,000 rubles. And work on construction sites will require costs in the amount of 100,000 rubles.

If you are going to organize your own fleet of vehicles to deliver finished products to customers, add the purchase of transport to the costs. These are significant costs, so at first you can offer consumers a pick-up service for purchased penoizol.

The installation price will begin to pay off as soon as you establish stable sales of your products. Wholesalers are the most profitable. But if at first it is not possible to conclude contracts for the supply of material with large construction companies, retail sales can be organized. Offer material to private traders at attractive prices - in markets, through advertisements, using your own online store.

The final profit from the business will depend on the volume of production of penoizol and the set price for the material. “Medium” lines produce up to 20 m2 of heat insulation per shift. There is also more powerful equipment, but it is not profitable for novice entrepreneurs to purchase such equipment until sales channels have been established - the machines will remain idle. The cost of penoizol on the wholesale market is from 800 rubles/m2. And if you sell all the manufactured material, you can earn up to 500,000 rubles from its sales. Net profit, minus variable costs, will be at least 200,000 rubles.

The indicated figures are an optimistic calculation. If the products remain in storage, the entrepreneur will not receive high income - therefore, it is important to devote all efforts to organizing sales of products. As practice shows, it takes less than a year to pay off a project.

Installation PENA-3000/10UM

PENA-3000/10UM is equipment for business+ class penoizol. An ideal solution for small businesses and construction organizations. It can be used both for pouring thermofoam on site and for producing sheets. Penoizol productivity is up to 29 cubic meters/hour. The installation is carried out at 220 V (possibly 380 V).

PENA-3000/10UM allows you to obtain a material of excellent structure, elastic, non-flowing, odorless, fine- and closed-cell, with low water absorption.

Advantages of the PENA-3000/10UM installation for pouring penoizol:

• Both pumps pump according to “volume”, exact dosage and ratio of components are guaranteed from the beginning to the end of filling, regardless of the viscosity and temperature of the components, regardless of the height of lifting of the components through the hoses;
• The radius of filling horizontally is increased to 50 m, vertically - to 30 m;
• The pump along the “resin” line is self-priming. Therefore, it is enough to throw the suction pipeline with a removable filter at the end into the container barrel from above and get to work. In other words, there is no need for a separate resin working container;
• A compressor with a capacity of 200 l/min is sufficient for operation, i.e. The supply voltage for both the installation and the compressor is 220 V, i.e. PENA-3000/10UM can be widely used in the private sector;
• The pump along the “foam” line has 3 working channels, of which only one is used, and the other two are reserve. In other words, the service life of the pump is practically unlimited;
• There is no need to configure the foam insulation installation. Regardless of the density, viscosity, temperature of the components, the flow of the pumps has already been adjusted by us in the best ratio and will remain so under any conditions;
• Installation management is simplified as much as possible. The “human factor” is almost completely eliminated;
• Equipment for penoizol Pena-3000 is equipped with a modified foaming system, which allows you to get more and better foam from the same amount of foam solution. It is possible to adjust the density of the foam mass and the productivity of penoizol directly from the control panel of the installation during operation.

The advantages listed above are interesting, first of all, to those who do not want to experiment. In this case, PENA-3000/10UM is very convenient. It was initially built on a 1:1 “resin”: “solution” ratio, which allows you to obtain good material. However, in some cases, the conditions for using penoizol require changing the proportion, increasing either the consumption of resin or solution. PENA-3000/10UM has such an opportunity. The solution pump capacity is set rigidly and remains constant. But the resin pump’s performance can “smoothly” change due to the fact that the motor of this pump is controlled through a frequency electronic regulator. This is very important and convenient when it is necessary to obtain a “resin”: “solution” ratio, for example, 1 to 0.8 or, conversely, 1 to 1.2, etc.

The pump performance is changed directly from the control panel by rotating the handle of the frequency converter. Clockwise - resin consumption increases, counterclockwise - decreases.

Installation PENA-2000DMU

PENA-2000DMU is the simplest equipment for the production of business-class penoizol; it is easy to manage and operate. This is the most widespread model, which is facilitated by an affordable price and good performance characteristics: length of the hoses from installation to the pouring site; installation performance; the ability to control air for foaming and mixing; light weight and convenient design. The installation can be flushed through both channels (separately or together); it is also possible to flush only the filling hose. 3 working containers for resin are required; under a solution of foaming agent and acid; under clean water (for rinsing).

The current price of equipment for the production of penoizol is indicated in the PRICE LIST. You can buy the unit and watch it in action during training at the NST plant.

If you have chosen the PENA-2000DMU unit, we suggest that you consider purchasing any RX-27 type unit and a PIZ-ZHR/09 mounted unit.

PIZ-ZhR/09 is a mounted unit that can be mounted on any RX-27 liquid rubber spraying installation (read more about equipment for liquid rubber spraying). After this, the equipment for seamless waterproofing is transformed into an installation for pouring foam insulation. Thus, there is the possibility of dual use of the equipment - for liquid rubber and for penoizol. The foaming and control system is borrowed from the PENA-2000DMU model, but the resin pump (the one used for pumping bitumen mastic) is the same as on the PENA-2000/10. Thus, by purchasing the PIZ-ZHR/09 block, you receive a hybrid of the PENA-DMU and PENA-2000/10UM models.

Yes, it will be more expensive than installing PENA-2000DMU, but at the same time, firstly, you will receive more advanced equipment for penoizol (due to improved modification of the resin pump), and secondly, you will have the opportunity to carry out work on applying seamless polymer-bitumen membrane based on liquid rubber.
Having two types of equipment instead of one is better!

You will have the opportunity to expand your business, increase profits, and enter new markets. If you are building your own house, then you can carry out not only thermal insulation, but also waterproofing yourself, so there is no need to pay third-party contractors. There is an opportunity for significant savings, and you can also be confident in the quality of the work.

This is what a mobile plant for pouring urea foam foam Penoizol looks like (in the photo - a division of MPK Progress LLC, Tyumen - a partner of the NST company, provides services for pouring penoizol).

Pouring penoizol at a construction site in the Tyumen region

To operate the installation, you must select the right compressor, because Not any 220 V compressor is suitable. At least 200 liters of air at the outlet are required if it is possible to maintain a constant pressure of up to 8 atm. For example, Abac Pole Position 310 can be used as a source of compressed air.

You can use other compressors with similar parameters. It should be taken into account that performance is often indicated “at the input”. But the real “output” is 60...70%.

If possible, choose a compressor with a large receiver. Those. if you find a compressor that also produces 300 l/min output, but its receiver is 50 l, then you should prefer this model.