Is it possible to make a good hookah yourself from improvised materials? Many hookah lovers are interested in this issue, especially in those moments when you really want to smoke, but there is no hookah at hand. There are several ways to make a hookah at home from scrap materials, which we will discuss below.

A little history

Hookah- a smoking device known to many. The smoke that is inhaled is cooled and filtered in the shaft (tube) of the device. The liquid inside the vessel retains approximately 40% of the various substances in the smoke.
History says that the first hookah was made in India and was used for pain relief during illnesses. Instead of tobacco, it was filled with hashish mixed with spices and medicinal herbs.

Method 1. Hookah from a plastic bottle

Let's remember what components the hookah is made of. Usually this:

• bowl;
• mine;
• flask;
• hose with mouthpiece .

A flask is a container, usually made of glass, containing water that helps cool the smoke. A do-it-yourself hookah flask can be made from any container. Of course, we immediately remember an ordinary bottle.

How to make a hookah with your own hands from an ordinary plastic bottle? You will need to take:

1. 2 liter bottle;
2. foil;
3. two plastic covers of different sizes;
4. apple;
5. handset;
6. toothpicks;
7. hookah tobacco;
8. coal.

First of all, you should make holes in the caps for the tube. After the lids are pressed together at the tops, the tube is threaded so that it ends up inside the bottle.
A do-it-yourself hookah bowl is made from an apple. To do this, the top of the fruit is cut off and the core is removed. Afterwards, a recess is made at the base of the “bowl” the same size as the diameter of the small lid. You need to make small holes at the bottom with something thin and sharp. This will allow the smoke to flow well, but will not allow the tobacco to fall through.
At the very end, a hole is made into which the hose will be inserted and the hookah at home is ready! All that remains is to pour water into the bottle, pour in tobacco, put foil on top, and add hot coal.

Method 2. Hookah from vegetables and fruits

It is not always necessary to look for plastic bottles, because you can build a hookah from fruits or vegetables. Below we will tell you how to make a hookah with your own hands at home.
In this case, you can use a glass instead of a bottle, and apples, oranges, watermelon or zucchini will act as a bowl. The principle of making this homemade hookah is the same as in the previous version. The only difference with this option is the aroma of fruit, which will complement the smoke.
Before smoking, it is recommended to cool the glass so that the smoke also cools faster.
Interesting fact: In Israel and Turkey, hookah is called nargyleh and nargile. Translated, this word means coconut. It was from this nut that the vessel of the device was made in ancient times.

Method 3. Wooden hookah

This is a great option for those who like to do things with their own hands and are good with tools. A hookah made of wood and clay is no longer just a disposable device, but a real work of art. But making it is still not as easy as the previous options.
A home-made wooden hookah can be an excellent gift or decorate your interior. At first glance, it seems that wood is the optimal material for such a device, because it will often be exposed to moisture and high temperatures. Nevertheless, it is this material that can give the taste of smoke special notes, which depend on the chosen type of wood.

Method 4. Watermelon hookah

Such a hookah at home turns out to be disposable, but it is quite easy to make. For the bowl, take any round fruit, for example an apple or grapefruit. The top of the fruit is cut off and the core is removed so that the wall thickness is approximately half a centimeter.
As a shaft for a hookah with your own hands, you can use an aluminum tube or a tube made of food-grade stainless steel. Other metals can change the taste of tobacco. If it is difficult to find such a tube, then you can take a thick marker or pencil and wrap food foil on it.
To make a flask we take a watermelon. The upper part of the watermelon is cut to fit a shaft of the required diameter, and the pulp of the berry is removed. Subsequently, it can be used instead of water, after thoroughly grinding it.
It is better to purchase a hose for such a homemade hookah at home in a specialized store. But a flexible shower hose or a thin plastic corrugated pipe is also suitable for this.

Method 5. Hookah from a glass jar

To make such a glass hookah with your own hands, you will need a 3-liter glass jar, an aquarium hose, a bowl, a rubber stopper, a tube, super glue, and a lid for the jar.
So, let’s start assembling a hookah from a jar with our own hands. First of all, we make two holes in the lid - the first for the hose, the second for the smoke to escape. We insert the tube and rubber stopper, while securing the stopper and lid with glue. The length of the tube should be equal to the height of the jar, but at the same time slightly short of reaching the bottom. The jar can be closed with a lid.
We secure the hose well in the hole made. Place the bowl on top. All that remains is to pour the liquid, add tobacco and your hookah at home is ready!

Other hookah elements and accessories

One of the elements of this smoking device is a diffuser, which you can make yourself quite quickly. It helps to divide the flow of smoke entering the shaft, smooth out the draft, and break larger liquid bubbles into soft ones so that the hookah does not gurgle. This device also helps improve filtration and cooling of smoke, making the smoking process easier.

Making a hookah diffuser with your own hands is not so difficult. To make it you can take:

• Kinder chocolate packaging - surprise. A hole for the shaft is cut out on one side of the package, and many small holes are made on the other side using a large needle.
• A film jar is perfect, with which you need to do the same as in the previous version.
• You can also use foil. A sheet measuring about 15x20 cm is folded in half.
• Small holes are also made in the center. After this, the foil is wound around the finger to make something like a confidant, and then the resulting structure is put on the shaft.
• A rubber hose with a diameter of 3-4 cm is perhaps the simplest and fastest option.
• Holes are made at the bottom of the hoses, and the resulting diffuser is put on the shaft.
• You can also use a thimble. We drill holes in it, put it on, fasten it well and everything is ready.
• You may also need a brush to care for your hookah. It helps to get rid of contaminants inside the bowl, flask, and hose of the device. If for some reason you urgently need this thing, but don’t have it at hand, then you can make a hookah brush with your own hands. To do this, you need to take a fishing line, the length of which is twice as long as the shaft, and wrap a rag around the fishing line. Then we insert the fishing line into the tube and clean it until we have washed out the maximum amount of dirt.

Tobacco

If you decide to make your own hookah, you may also need a tobacco recipe that you can make yourself.
To prepare you will need molasses, tobacco from cigarettes or pipes (preferably pipe), glycerin and essential oils that you like. Molasses can be replaced with honey or jam.
Because purchased tobacco is too strong, some of the strength will have to be removed. To do this, you need to pour the required amount of tobacco with just boiled water, pass it through a sieve, squeeze it out and dry it in the oven, setting the temperature to minimum. Mix dry tobacco with a small amount of purchased tobacco, pour in 2 tubes of glycerin, 5-10 drops of essential oil. Add molasses until the mixture resembles thick jam. The finished mixture should be placed in a jar and left for a week.

Homemade hookah bag

Whether it’s a hookah made at home or bought in a specialty store, it’s a fragile thing. If you plan to carry the device with you to friends or on vacation, you should consider a bag for this device.

To sew a bag at home you will need:

• sewing machine with a thick needle;
• scissors;
• meter;
• a piece of chalk and a pencil;
• paper;
• textile;
• braid.

First of all, you need to make a pattern for a hookah bag. On the Internet you can find many options for such patterns. First, the pattern is drawn on paper and then transferred to the fabric. After the pattern is ready. All elements are connected, the bag is decorated with locks, chains, etc.
As you can see, making a hookah from improvised materials at home is not very difficult. Having such a device at home, you can always relax and enjoy your vacation. You don’t even need to go to a hookah bar for this. By making a hookah with your own hands, you can surprise your friends, and you yourself will enjoy it.

HOW TO MAKE A HOOKAH YOURSELF

HOW TO MAKE A HOOKAH WITH YOUR OWN HANDS FROM AVAILABLE MEANS

Many hookah lovers have at least once thought about making their own hookah. For some, this is an attempt to save money, others want to try something new or just like to experiment. In any case, the idea finds a response, so you can even find a video on how to make a hookah with your own hands and get acquainted with the experiences of other people. The simplest version of a hookah can be made even from an ordinary plastic bottle, but it doesn’t look very good, and it’s only suitable for one use, so it’s better to consider more serious options.

WHAT DO YOU NEED TO MAKE A HOOKAH?

To make a hookah, you will need some items, although the set of available tools may vary, variations are quite possible in this process.

• First, make a hookah flask with your own hands. Some kind of container will do, the main thing is that it is stable, has a tight lid and does not leak. As for the size, you can take any, from a glass to a five-liter bottle. Also, some craftsmen make flasks from large fruits, for example, watermelons.
• The shaft is made from a small-diameter metal tube or you can take a plastic one - these are often left over after repairs. The tube is inserted into the hole of the flask and sealed - with foil, a rubber ring or even regular chewing gum.
• A DIY hookah bowl can be made from different materials. Some people make it from wood or clay if possible, but anything can be used for it, even a tea strainer. And the bowls are made from fresh fruits.
• The hose can be made from pieces of a dropper or plastic corrugation; if you don’t have any of these, then cocktail tubes will do, although they are short, you can also smoke with them.

Making a hookah from a bottle with your own hands is not that difficult if you understand how this device works and have some smoking experience, as well as the necessary materials at hand. This can be an interesting experience, good entertainment for a company, or salvation if you suddenly really want to smoke, but there is no opportunity to go to a hookah bar yet. In terms of such creativity, you can go further and make hookah tobacco with your own hands, and you can smoke it with ordinary store hookahs. This process can also be quite interesting for those who want to experiment.

How to make a hookah with minimal cost and time. We will need a plastic bottle (a 2L bottle will do), a tin can, tubes (from an aerator, or from a dropper), a rubber stopper, a piece of pipe, a knife, and foil. This is exactly the set of tools you will need to make a hookah at home with your own hands.

1. First, let's take a plastic bottle and make two holes in it as shown in the figure; the tubes will go there, they should fit in there freely and not be pinched.

2. We make a similar hole on the side, it is best to make it on the other side or as shown in the figure.

3. Make holes in the jar as shown in the picture (be careful with the knife!). Secure it firmly enough to the table or floor and under no circumstances do this with the can held between your knees. Poke with a knife, then turn the knife a little. There should be enough holes so that the tobacco burns well and the smoke goes down.

4. Insert a piece of pipe into the bottle, the picture shows a curved pipe, but this is not necessary.

5. Take a tin can and make a hole wide enough into which the tube can fit without any obstacles.

6. The same operations must be done with the rubber stopper, which will serve as a seal.

7. Place the tube in the bottle. Make sure the bottom of the work is not flush with the bottom of the bottle.

8. Pour water into the bottle and secure the rubber stopper on top. Press it down until it locks onto the neck and tube.

9. Insert the hoses into the holes you cut earlier.

10. Attach the jar to the tube, just make sure that it is securely attached there. Take the tobacco and place it on the jar. There is no need to fill the container too tightly; there should be enough air in it so that the tobacco burns evenly.

11. Take regular food foil, fold it in half and secure it at the top of the jar, make a few holes.

12. Insert some kind of plug into the hole on the other side; a ballpoint pen works well. Put on the coal and enjoy hookah smoking.

Many nightclubs and entertainment venues have hookah rooms with a cozy atmosphere. If you decide to recreate such a corner at home, it will be useful for you to learn how to make a hookah so that you get thick smoke and a pleasant taste without bitterness. Our instructions provide information for beginners in the hookah business.

First, let’s find out what the design of the hookah is; this knowledge will be useful for further manipulations. It consists of a flask, a shaft, a hookah bowl (chilim) and hoses (or a single hose). In addition, for this venture you need to stock up on consumables, and these are foil, hookah charcoal and tobacco. To care for the structure you will need a special brush and citric acid. Now let's talk directly about preparing a hookah. The whole ritual begins with filling the flask with liquid. You can use ordinary water, juices, milk. However, in the latter case, you will have to pay great attention to cleaning the hookah, otherwise you will have a rotten smell when smoking. When you pour water, make sure that there is enough space in the chilim for steam to form. The end of the rod is immersed in water by about 2-4 centimeters. This is very important, since excessive immersion of the pipe will prevent you from lighting the hookah. This also risks allowing liquid to get into the hose. If it is not placed deep enough, the smoke will be hot when it reaches the throat. To make the steam more aromatic, it is customary to add a little wine, juice or fruit essence to the water. Remember that it is not recommended to add strong drinks (scotch, absinthe, cognac), as the result is difficult to predict. At the next stage, it is recommended to check the tightness of the structure. Most of them are sold with a gasket connecting the flask and the shaft, which is made of plastic or rubber. They are characterized by high tightness. But if this is a problem, it is recommended to use electrical tape. Although this is not entirely aesthetically pleasing. After this, you can place the saucer on the hookah. It is necessary to place coals and protect the floor covering from falling ash. It is also convenient to place tongs on it. A bowl is placed on it. Insert the hose into the special port, with the less beautiful end. If the tightness is insufficient, it is recommended to use appropriate gaskets. If your hookah has more than one hose, but you usually only use one, then close the second hole with a rubber stopper.

The most important step is filling the bowl with tobacco. Toss the leaves well until they are coated with the syrup and molasses. Layout features depend on your preferences. The classic version is this: carefully sort out the tobacco, select and tear leaves that are too large, fluff the remaining tobacco and place it loosely in a bowl, there should be a lot of air in the mixture. It is highly undesirable to compress it, just as it is not advisable to fill the entire bowl with tobacco. On the contrary, it should not stick to the foil; for this it is recommended to leave about 2 millimeters to the foil. It’s good if you pierce the laid mass with a needle so that air can better flow to the smoldering tobacco. This will make it easier for you to pull the hookah.

Now you can cover the tobacco with aluminum foil. Its size should be 5 centimeters larger than the diameter of the bowl. You can place it on either side, it doesn’t matter. After placing the foil, wrap it around the bowl to create tension, but do not press it, it should not compress the tobacco. Thick foil is, of course, good, it will be easier to regulate the heat, but remember that it cannot be rolled up, one layer will be enough. Fold the thin foil several times. However, there should not be too many layers, 1-3 is just right. At this stage we make holes in the foil. To do this, we will use an ordinary needle or pin. But toothpicks are thicker, put them aside. For a classic Egyptian bowl, this hole pattern is best suited: a circle around the edge of the bowl and a spiral inside. If your bowl is funnel-shaped, make three concentric rings. Remember that many holes do not produce a lot of smoke. To do this, you need to achieve a balance between tobacco, coals and holes. It's time to light the coals. For this purpose, use matches, a fireplace or hookah lighter that produces a large fire. An ordinary pocket one will not work, as you can burn your fingers. It is convenient to hold the coals with special tongs. Then we proceed as follows: light the fire, bring it to the coal, hold it there for several minutes, wait until the coal burns (at the same time it sparks and gives off acrid smoke), when the coal becomes gray on top and red inside, we place it on the tobacco bowl. Make sure the coal is red. If it is black, do not try to inflate it on the spot, nothing good will happen, at best an unpleasant odor is guaranteed, and at worst carbon monoxide poisoning. It is not recommended to light charcoal over the bowl, otherwise particles from it will get into the tobacco and change its taste. If you use natural coal, say, pressed coconut, then keep in mind that it is usually lit on a gas burner. In the case of a ceramic or glass stove, cracks may form. Wait for the bowl to heat up. You can then move the coals to the edge to prevent the tobacco from burning and producing acrid smoke. To light a hookah, you will have to take 5-10 breaths. But it is impossible to smoke with one puff. You need to pull slowly, not jerkily, the tobacco should not bounce. But it is recommended to take strong breaths. When pleasant steam comes out and the puffs become full of smoke, the hookah is ready for use. It is customary to smoke a hookah with a clay bowl for 30-40 minutes. When smoking alone, it can last for an hour. If the hookah is made from fruit, then about 50 minutes.

Often, when smoking, some unpleasant moments arise:

• Sore throat and bitter taste. This happens due to leaky joints, especially the place where the hose is connected. It is also recommended to check the coals in case they touch the tobacco.
• If you have to make a lot of effort when inhaling, then you should pay attention to the water level. Remember that the tube must be immersed a maximum of 5 cm.

Caring for a hookah is not very difficult. The tobacco is discarded immediately after the bowl has cooled. It is recommended to change the water when changing the type of tobacco. However, at least once every 10 smokes. In this case, you need to rinse the flask thoroughly. It’s good to use a brush for this kind of thing. The upper part of the structure is washed every 10-15 smokes. After the bowl has cooled, the tobacco is discarded. Remember that detergents are not suitable for caring for a hookah. But it is better to wash hoses rarely, but leather products are not washed at all. After washing, dry the structure to avoid oxidation.

That's almost all. Store the hookah after disassembling it. But if you want it to show off assembled on your shelf, at least remove the hoses. This is due to the fact that their frame is made of a metal spring, which can rust. If you need to move your hookah, hold it!