The dismantling of the water tower is required if the structure is no longer subject to repair. Also, the reason for the demolition is the construction of a more powerful structure in the same place.

Lack of proper care can lead to the destruction of structures. According to the type of water tower and materials for its construction (reinforced concrete, steel, brick, etc.), they choose the appropriate dismantling technology and determine the order of work.

You can use one of the following options:

• complete dismantling of the entire hull, if no damage is caused to nearby buildings;
• method of dismantling the main tank by cutting and transporting structures to the place of further use. The remaining elements of the structure are disassembled in parts;
• partial demolition in the presence of a tower body made of concrete, brick, stone, etc. It is dismantled first. Then the building itself is demolished, cutting it into separate fragments.

The dismantling of the water tower must be carried out on time. The dilapidated state of such structures often leads to accidents and other tragic consequences.

Prices for the dismantling of water towers

The cost of dismantling depends on the need to call automated special equipment, the accident rate of the structure and the general working conditions. You can find out the approximate prices for the demolition of water towers from us. The final cost is calculated after inspection of the object.

To carry out dismantling, you must have title documents that indicate that you are related to the object being dismantled. For cars, this is for example DKP, PTS. If the object is owned by a company, a representative of the customer company with supporting documents will be required.

The timing of the work depends mainly on two factors: the volume of the order and the complexity. For example, 10-ton machines in a working factory can be more difficult to dismantle than a 100-ton tower crane, but located in the open air outside the building. If it is necessary to carry out dismantling work in a short time, we are able to assemble up to 25 cutters at 1 site, due to which we can dismantle, cut and remove up to 300 tons of metal per day. To estimate the timing and cost of the metal, you can send a photo of your facility or equipment to our manager.

In general, the whole process can be divided into 3 parts. 1. Preparation: at this stage, large equipment is moved from the room or basement to the open area. If we are talking about a tower crane or an excavator, then to simplify the work, such equipment is overwhelmed. Hangars, garages and other premises are cleared of cladding and all rubbish in them. 2. Cutting: Secondly, the metal is cut using oxygen. It is important that by this time the dismantled metal is in an open area to prevent fire. 3. Loading. After the scrap metal is cut into small pieces, it is loaded into the equipment - either by a scrap truck grab, or by loaders to Gazelle or Valdai, depending on the volume of scrap.

We estimate the weight of the metal dismantled at your facility. This means that all non-metallic impurities and parts will be deducted from the weight. For example, for a tower crane, the weight of a concrete counterweight is not taken into account, and for trucks and special equipment, interior lining, glass, rubber, and so on. Weighing takes place using high-precision truck scales at our base. Then there is a settlement with the customer in cash on the same day or by bank transfer within 3-5 banking days.

We call dismantling free because you don't have to pay us anything. Provided that the volume of metal at the dismantled object will be 2 tons or more, the metal that you hand over to us as scrap metal will completely cover our costs for transport, cutting services, dismantling and loading of dismantling waste. Even more, for the dismantled metal, WE SHOULD pay YOU based on its weight, up to 16,200 rubles per 1 ton. The cost of our work is included in the price of the delivered metal, which makes our services completely free for you.