To store various pleasant little things and souvenirs, to pack a small present or craft, you can use an element that you can create with your own hands in a few minutes - this is a paper box. It can also be made from thick cardboard to place jewelry or store pencils. Methods of application are limited only by your own imagination.

But the technology makes it possible to quickly and easily assemble a large or small square box for a bedside table, a drawer or box as a space organizer in a closet, or a mini version - a box for small items.

A paper box is perfect for storing various pleasant little things and souvenirs.

Origami is an original technique that allows you to create a real masterpiece from an ordinary sheet of white or colored paper that can become a full-fledged interior decoration. It’s easy to fold a box for storage or packaging with your own hands.

To get started, make sure you have:

• 2 sheets of paper or cardboard (1 should be a little larger, since the lid is made from it);
• a simple pencil;
• scissors;
• ruler.

For decoration - satin ribbon or flowers (they can also be made using the origami technique).

The work process looks like this:

1. You need to draw two lines diagonally (a pencil is used for this purpose; you should not press it hard);
2. If the sheets are rectangular in shape, then before the main work and drawing lines you should form a square out of them by cutting off (or carefully tearing off the lower horizontal strip;
3. The right corner located at the bottom should be folded towards the center of the resulting square;
4. The lower part will need to be folded in half again (the guideline is that the edge is located strictly along the diagonal line);
5. Slightly iron the lines along which the fold was made with your fingers (with light pressure), and then unfold the entire workpiece;
6. Repeat the procedure with all other corners (steps 3-5);
7. In the center, make cuts on both sides (with scissors) to the middle of the sheet (along diagonal lines;
8. The side corners need to be bent towards the center of the sheet so that they meet evenly;
9. After this, you will need to lift the sides of the future box;
10. The remaining walls are formed by folding the edges towards each other to completely enclose the square;
11. The cut edges are placed inside the box.

To make the bottom, you should do the same steps, at the end connect the two parts and decorate the finished craft with the chosen option.

DIY box with a lid without glue (video)

How to make a heart-shaped paper box yourself

For the holiday of love, you can give an original souvenir - a box made in the shape of a heart.

In order for it to be used as a decoration in the room, it is recommended to use cardboard or thick colored paper.

You will also need:

• Scissors;
• Stencil;
• Glue;
• Cardboard or thick colored paper (pink or red);
• Rectangular bases (paper) along the length of the future box (one should be wider than the other).

The process of creating a heart-shaped paper box:

1. Make blanks using stencils (trace them on cardboard and cut them out);
2. On each side (base), make notches using scissors (along the entire length, slightly retreating from the beginning and not reaching the end);
3. The edges of the base and the heart should then be glued together so that the base forms the wall of the box (form a circle so that the box has walls everywhere);
4. Perform the previous step again (to create the cover).

You can decorate the heart with fabric, ribbons, lace or beads. Such a box will be a pleasant surprise or a sign of attention towards a loved one. There is a wide variety of decorations for boxes - the choice is limited only by fantasy and imagination.

Simple DIY rectangular paper box

It is not difficult to create a rectangular box from paper (cardboard). There are different schemes, but each person can come up with their own version.

An easy-to-make craft will require the following tools and accessories:

• colored paper - 1-2 sheets (30x30 cm);
• small scissors (you can use nail scissors);
• glue (pencil or stationery);
• a simple pencil;
• diagrams, templates for work.

It’s easy to create a rectangular box from paper (cardboard).

The procedure for making a rectangular box:

1. It is necessary to attach the selected template to each corner of the paper and circle it;
2. Cut out the blanks and then fold the sides in half;
3. Fold each one in half again;
4. Then repeat this operation again;
5. Unbend the workpiece;
6. Bend the part that is on the left side inward;
7. Glue the side elements together (glue them to adjacent parts for strength);
8. Now you need to work on the lid, to do this you will need to repeat operations 1-7, but you will need to bend the side elements twice;
9. The protruding elements of the future box should be cut off;
10. The internal side elements need to be well glued.

After this, you can start decorating if the box is required for gift wrapping. The choice of options depends on the event or fantasy.

Paper box with a surprise: ideas for creativity

In order to put together a unique box, you can use not only ready-made templates, but come up with ideas that will turn out to be a real surprise for the one who receives such a souvenir.

A homemade paper box should be multi-layered:

• 1 layer – the actual box made of paper or cardboard;
• Layer 2 and all subsequent ones are decor.

It is also a very good idea to combine several types of paper and play with color contrast. You can also take as an idea for a surprise box:

• attaching ribbon or lace bows to the inside of the box;
• placing them directly on the lid;
• the use of beads or other jewelry that fits into the chosen theme of decorating the craft.

The homemade paper box must be multi-layered

You can decorate the box in a wide variety of styles:

• vintage;
• futuristic;
• retro;
• children's;
• space;
• holidays;
• trips.

Auxiliary decorative elements will help enhance the overall positive mood and complete a harmonious and bright composition.

When is the surprise box used?

You can make a similar craft for a variety of events and holidays.

Options:

• New Year (you can stick themed cards inside the craft, write congratulations on the walls or decorate it with Christmas tree decorations);
• men's holidays (February 23, personal dates - themed decorations, placing a composition on the theme of the holiday from paper or plastic figures, music recording);
• birthday – (paper or fresh flowers, ribbons, decorations made of fabric or lace placed inside, certificates or tickets, gift cards);
• wedding or engagement – ​​(hearts, photo collages of lovers, stylization in the form of wedding rings, plush toys according to the size of the box).

Children's options, celebrations and themed parties - here the surprise and decoration is limited only by the imagination of the one who makes the box.

Paper box from A4 sheet: how to make it yourself

In order to create such a craft, you will need:

• simple (black) pencil;
• scissors;
• ruler;
• paper (colored or white in the required format) – 2 sheets;
• glue.

You can also use various accessories for decoration, gift wrapping for gluing on the outside or applique.

This box is very easy to make.

Directly performing the work requires the following actions:

1. Fold a piece of paper, folding the corner toward the center to form a square;
2. Cut off the excess part from the sheet;
3. Fold the sheet in the other direction, then unfold (you should get two diagonal fold lines);
4. Then fold all 4 corners to the center of the sheet;
5. Fold the long parts of the workpiece alternately towards the center;
6. Unfold the workpiece, turn it 90 degrees;
7. Fold the remaining sides as well;
8. Make cuts on the top and bottom sides;
9. Unfold the top and bottom to form walls;
10. Fold the remaining parts, forming walls on each side of the future box;
11. Fold the remaining two parts - the base is ready for use.
12. Make a slightly smaller piece from the second sheet - this will be the lid of the box;
13. Repeat all steps from steps 1 to 11.

DIY origami box (video)

In this master class we will look at several ways to make DIY paper box. The first method is a little more complicated, and the second is very easy.

The first method is an origami box made of paper.

To make such a box we need scissors and two pieces of paper. The first one is 21.5x21.5 centimeters in size, this will be the lid of the box. The second sheet measures 21.2x21.2 centimeters, so this will be the bottom part. As you noticed, the sizes of the sheets are not very different, and if you don’t have a ruler on hand, I advise you to choose sheets so that one of them is slightly smaller. The folding method for the top and bottom is the same. That is why we will consider making only one part of origami with our own hands. To make the box stronger, we recommend using thicker paper, such as cardboard. Let's get started with our instructions.

1 . Draw 2 diagonal lines. The easiest way is to do it with a ruler and pencil.

2 . We bend one corner to the center of the square, as shown in the photo.

3 . Then we bend the same side in half. The edge should lie exactly along the diagonal line.

4 . After we have ironed the fold lines, we unfold everything back.

5 . We perform exactly the same procedure described in paragraphs 2-4 with the remaining corners.

6 . We cut 2 corners with scissors, as shown in the picture.

7 . We bend the side corners towards the center. So that they converge at the central point of the square.

8 . Raise the side walls of the box. Since we have made all the necessary folds, this step will not cause you any difficulties.

9 . Next we begin to form the walls. To do this, bend the edges towards each other as in the diagram.

10 . Now we put the edges that we trimmed inside the box with our own hands.

11 . Now the lid for the gift box is ready. All that remains is to make the bottom.

12 . The bottom is made in exactly the same way. We advise you to carefully select paper. Basically, paper of a single color is selected for the lower part. And for the top paper with various designs.

13 . Additionally, you can add solemnity to the gift box with your own hands by decorating it with a beautiful ribbon.

The second diagram of a paper box.

This box is much easier to make than the previous origami. To make it you do not need scissors and a ruler. All you need is to select a sheet of paper of standard size A4, A3, A2, depending on what kind of box you want to get as a result. For example, from an A4 sheet you get a box measuring 10x10.5 centimeters. We will also consider only making one box module with our own hands. Since both parts are assembled according to the same principle. Don't forget the bottom of the box should be a little smaller.

1 . Place the sheet in front of you, with the long side facing you.

2 . Make 2 fold lines, you should get 3 equal shapes.

3 . Fold the right rectangle in half as shown in the photo.

4 . Do the same with the left rectangle.

5 . We bend the corners on both sides from the top and bottom, as shown in the pictures.

6 . We turn the sheet over and do the same thing. On the one hand, the corners should be single-layer, on the other, two layers of paper.

7 . Having bent all 8 corners, we unfold the workpiece, with the corners facing inward.

8 . Let's proceed to the most important stage, we need to evenly open the box.

9 . Forming the ribs. You can do this yourself. Make sure that the sides are approximately the same size.

10 . In this simple and quick way we made one part of an origami box.

11 . In the same way we assemble the second part of the box. Don't forget that one of the origami parts should be a little smaller.

Now you are familiar with origami and know how to make a paper box with your own hands. These two origami methods are the most popular and simplest. Don't forget to leave reviews and impressions of the master class.

Today I’ll tell you how you can make a beautiful gift box with your own hands.
There are quite a few master classes on this topic on the Internet, but I don’t think I’ve ever seen my version, but it’s very convenient and the box is thick even from thin paper.

To work you will need:

3 sheets of cardstock measuring 30x30 cm each,
1.5 meters of tape of the desired color and width,
Double-sided tape,
Glue Moment Crystal or Joiner,
Scissors,
Paper cutting knife,
Creasing stick, if available - scoring board,
Ruler,
Pencil.

Working hours:

When your hand is “stuffed”, it takes about 30 minutes FROM and TO the box. But if you don’t have certain skills, making a box can take several hours.

Paper selection:

To make such a box, I recommend choosing cardstock with a density of 200 to 270 g/m2 - this is the optimal density at which it will be comfortable to work with paper. Thicker paper may break and be too rigid and clumsy, while paper that is too thin will not be able to provide the required density to the box.

Description of work:

1. Determine the size

Before starting work, you need to decide on the size of the box - it is important to know its length, width and height. After this, the paper size is calculated.
For the bottom of the box, the paper size should be as follows:
2 cm + box height + box height + length + height + height + 2 cm = length of a sheet of paper
2 cm + box height + box height + width + height + height + 2 cm = width of a sheet of paper

For the top of the box, the paper size should be as follows:
2 cm + (box height - 1 cm) + (box height - 1 cm) + (length + 0.5 cm) + (box height - 1 cm) + (box height - 1 cm) + 2 cm = length of a sheet of paper
2 cm + (box height - 1 cm) + (box height - 1 cm) + (width + 0.5 cm) + (box height - 1 cm) + (box height - 1 cm) + 2 cm = width of a sheet of paper

If the box is square, then measuring one side is enough.
For my box, I chose a size of 10x10 cm with a height of 4 cm. A sheet of cardstock measuring 30x30 cm would suit me.

2. Making the bottom part

We take a beautiful turquoise cardstock and line it according to the diagram and our calculations:

It turns out this is the preparation

This is what the workpiece will look like after the cuts. I make the cuts “by eye”, cutting out very small pieces, only so that later I can “plant” the sides correctly.

And this is a workpiece already with bigs (the reverse side is shown for clarity). Bigs can be made with a scoring stick. If you have a scoring board - just great, the folds will be perfect and the paper will not break.

The next step is to fold the sides. We bend according to the pattern, first inward 1 and 2, then bend outward 3.

You should end up with something like an accordion on each side:

The “extra” valve tails need to be bent as in the photo - inward.

The description is quite complex and may seem confusing, but it is better to try to make a blank using the diagrams and photos - you will immediately see where the cuts and folds should be.
As a result, you should get something like this:

Now we apply a little glue to the short sides, hide the valves inside and, as it were, “cover” the top with the glued part. We press the side panel tightly on both sides and wait a little for the glue to set.

The bottom part of the box should look like this.

There is just a little bit left - you need to cut and glue the bottom. We make the size of the bottom 3 mm smaller on each side than the size of the bottom of the box base. For example, if we calculated the base to be 10x10 cm, then we cut out the bottom measuring 9.7x9.7 cm.

Apply glue to the bottom of the box inside and carefully place the cut out bottom on top. Press with your fingers - the bottom of the box is ready!

3. Making the top part

We do the upper part similarly to the lower one, only the calculations will be slightly different.

For the top of my box the paper size should be like this:

Please note that the height of the top of the box has decreased by 1 cm, and the length and width have increased by 0.5 cm. Half a centimeter is the necessary margin for a comfortable fit of the lid, and the shortened height is for convenient opening of the box.

We make markings on a sheet of 30x30 cm:

After marking, we cut off all excess (marked in red in the photo):

We cut out the bottom, 3 mm smaller than the bottom of the base, in our case it is 10.2x10.2 cm. But we don’t glue it right away, we can only try it on for now.

Now you need to prepare the tapes. Cut 1 ribbon 30 cm long, 2 ribbons approximately 50-60 cm long each. The ribbons must be carefully ironed to ensure they look perfect.

We glue small pieces of double-sided tape to 4 sides of the inside of the lid to secure the tapes.

Carefully glue the edge of the tape first to the bottom of the lid, then to the side.

We wrap the tape around the outer part of the lid and also glue it on the other side inside:

In this case, it is important to monitor the direction of the tape so that there are no distortions, and you also need to ensure its uniform tension so that the tape does not dangle.

Now we glue two pieces of tape on the free sides of the lid. Glue only one end of each segment, leaving the other end free.

Carefully apply glue to the bottom and edges of the ribbons. I deliberately do not apply the glue too close to the sides, so that when gluing the bottom it does not crawl out.

Carefully glue the bottom.

The lid of the box is almost ready, all that remains is to tie a beautiful bow:

The excess length of the ribbon on the bow needs to be cut off, the edges can be processed with a lighter - an almost imperceptible scar will form and the ribbon will not crumble.

All! The box is ready and you can pack the gift!

Probably, many will agree that not only children, but also adults love to receive gifts, and if it is hidden in an original box, then this will leave an unforgettable surprise experience. And we are sure that the time spent creating it will pass quickly and unnoticed, because the result will definitely please you. Here you can find the most original and interesting ideas on how to make a paper box with your own hands with a lid. The step-by-step instructions will help you complete it without much difficulty in a matter of minutes.

Important! Before you start creating a gift box, we advise you to practice on simpler paper, because then you will be able to take into account all the errors and inaccuracies that may arise.

Choosing material

So, how to make a beautiful gift box with your own hands? To do this you need the following materials:

• Corrugated cardboard;
• Laces, ribbons, ribbons;
• Buttons, beads;
• Ready-made labels;
• Scissors, stationery knife;
• Double-sided tape, glue stick;
• Super glue or “Moment” universal glue (transparent gel) for attaching beads and other things;
• Pencil, ruler;
• Hole puncher;
• Compass.

Now there are many ideas for creating original gift boxes; we have selected the most interesting and affordable options for you.

Box with round base:

1. You need to cut out 4 circles: using a compass, we draw circles (you choose the diameter yourself) from thick packaging cardboard, or from porous cardboard. Two large mugs and two small ones.
2. From tinted cardboard or any other that you have, we cut out two strips so that they match the size of the circles, with a margin for overlap, one of them is wide, the second is narrow.
3. Glue together two large circles using Moment glue or double-sided tape. Afterwards, we glue the remaining two circles separately.
4. We need small circles for the base of the box. We apply transparent “Moment” glue to the sides of the circle, gluing a strip of cardboard; for reliability, you can also glue another strip on top of this.
5. We do the same with the lid for the box: we glue a narrow cardboard strip along the edges of the large circle.

Important! To make your box look more festive, you can create a beautiful bow from colored or printed ribbon. To do this, you need to cut the ribbon in half, glue its ends to the inside of the lid, and tie the remaining long ends into a bow on top.

Classic gift box

And for lovers of the classics there is this option: a small box for a small gift. We will need the following materials:

• Ruler;
• Scissors;
• Thick colored paper or cardboard (soft).

Let's look at the whole process step by step on how to make such a paper box with your own hands. For the blanks you need two squares - large and small. The difference in size is 1 cm, for example 15:15 and 14:14. Let's format them:

1. We select the lines of the squares diagonally, then bend the corners to the center.
2. Next, the corners bent towards the center need to be folded to the opposite fold line, and then to the nearest fold line. A square should form in the center, which will subsequently become our future bottom.
3. After this, on both sides of the formed diagonals, along the first deflections, we cut to the designated square in the center.
4. The edges that we cut are folded along the curves, so we get the walls of the box.
5. We bend the sharp ends of the walls inward, towards the center of the square.
6. Using the remaining uncurled paper tongues, we grab the curved ends, thereby wrapping them inward.

We have a box-lid.

We perform the same manipulations with the second square, and due to the fact that this square differed in size by one centimeter, the box comes out smaller and will fit freely under the previously made lid.

To secure the gift inside, place a napkin or light crumpled paper on the bottom. As you may have noticed, making a gift box with your own hands is quite simple. The colored braid with which we will tie our box will help to add originality and an interesting accent.

Box with a secret

And now we invite you to make small gift boxes with a surprise. The so-called fake box: when the lid is removed, it swings open. You can see how to make a lid in the second option described above.

So, let's start making a gift box with a secret.

Materials for work

For this we need:

• Scissors, glue, thick paper;
• Old cards, beads, ribbon;
• Decorations, decorative ribbons.

Important! If you decide to make the bottom 18x18 cm, then for the lid you need 1 cm more, that is, 19x19 cm.

Step-by-step master class:

• The box itself is made in this way: we divide the sheet into nine equal squares; we don’t need the corner ones, they need to be cut out. We bend the remaining squares inward, forming a box.
• We decorate the inside as your imagination desires (with pleasant wishes or poems), glue beads, rhinestones, buttons, drawings from postcards, a small bouquet.

Important! Don’t go overboard with the decor so that the gift remains the main focus of your surprise.

• Now you can put the gift in the middle, put the walls of the box together and cover it with a lid, you can also tie it with ribbon.

Felt box

Felt is a miracle material from which you can create not only handbags, jewelry, toys, but also beautiful gift packaging.

Materials

To create it we will need:

• Colored felt - its density varies, depending on the thickness of the sheet, choose the most convenient and flexible one so that it is convenient to sew;
• Threads with a needle;
• Ruler;
• Glue (super or hot glue),
• Scissors;

Master class step by step:

1. Draw the canvas with a pencil to leave fewer marks and not stain the fabric, into 9 squares. You can also use rectangles, cut out the corners.
2. Decorate the outside with colored appliques; if desired, you can embroider simple patterns, decorate with beads or seed beads.
3. Carefully bend the walls and sew them together. Seams with contrasting threads will give a more interesting and unusual look. In general, there are no restrictions, so you can experiment freely.

Important! Felt boxes can later also serve as a box for various small items or decorations. It is also possible to use them during competitions for children and all kinds of holidays.

Beautiful box in the shape of a flower

If you need a minimum of costs and time spent, then there is an option for you: a simple box without glue:

1. We print it out or you can redraw the template on colored paper.
2. We cut out the workpiece, create folds along the lines, and use a ruler.
3. If your paper is white, then turn the workpiece over to the front side and tint it over the entire surface or just the edges using a sponge and a stamping pad (you can also use pastels or watercolors).
4. We hide our present in the middle, and we can collect the “petals” from above.

Box with a heart

For special occasions, we can make such a delicate and romantic paper box with our own hands.

Materials

For this you need to take:

Making a box out of paper - master class step by step:

1. Print and cut out the template, follow the indicated lines with a blunt knife or scissors to make neat grooves in the right places.
2. Transfer the heart template to the lid part and cut it out with a stationery knife.
3. We make folds along the lines and fold the box, then fix it with glue.
4. From the wrong side, carefully close the window with film.
5. We decorate the lid with flowers made of paper or fabric, stripes with beads.
6. We do the bottom the same way.
7. At the end of the work we supplement the composition with ribbon.

Cardboard gift packaging

To make cardboard gift packaging we need:

• Sheet of cardboard;
• Scissors or compass;
• Scheme;
• Double-sided tape or glue.

Let's get started:

1. We cut out a rectangular box template from a single sheet, as shown in the diagram.
2. We draw along the fold lines with scissors or the tip of a compass to fold the sides of the box evenly.
3. Afterwards we glue it with pieces of double-sided tape as shown in the picture.
4. We decorate with color pictures or inscriptions - it depends on the event for which you are preparing.

Cardboard carrots

It sounds intriguing - it will be a wonderful and unexpected surprise where you can hide a small gift, for example, decoration, sweets, small toys.

Important! If you are thinking about what to put in such packaging, here are some ideas:

• A friend or sister can pack nail polish and lipstick in this way.
• You can put a bracelet, earrings or a chain in a “carrot” for your spouse or girlfriend.
• Gifts such as cufflinks, tie clips or money clips are suitable for a father or brother.

Materials for work:

• Orange thick paper;
• Green dense threads;
• Scissors;
• Transparent moment;
• Green fabric (felt will do);
• Box template;
• Hole puncher.

Progress

So, the stages of creating a carrot box:

1. Print the template on orange thick paper.
2. We cut out the blank. We fold our product along the dotted lines.
3. We assemble and glue the workpiece. Use a hole punch to create a hole in the upper parts of the workpiece.
4. We cut out leaves from green fabric, tying green strings to them. Five of these leaves will be enough.
5. We tie the leaves to the holes that we previously cut with a hole punch.

Important! On green paper or a ready-made cardboard tag, you can create an additional leaf on which you can leave a congratulatory inscription.

Video material

To make such a simple paper box, you don't need any glue or scissors. Just a piece of paper and your skill. The paper can be either thin or thick, square or rectangular. If you want to make a large box, take a large sheet of A3, A2 or A1. If the paper is too thin, fold it in half or even 4 times.

How to make a simple paper box using the origami technique:

1. A sheet of paper must be visually divided into 3 parts. It is desirable that all 3 parts are the same. Bend the paper as shown in the figure.

2. Bend the side parts in half, left and right.
We obtain such a part as shown in Fig. 4.

5. Bend the corners. Please note that on one side the corner should be made of double paper, on the other side it should be made of single paper.
You should get 8 bent corners. 4 on one side and 4 corners on the other side. The process is shown in detail in Figures 5, 6, 7, 8, 9.

10. Straighten the resulting part symmetrically relative to the center.

12. We look into the resulting pocket and straighten it into a box shape. This is the most important stage in the work.

13. We make folds with our hands in all corners of the box to give rigidity to the structure.

14. This is what a finished simple origami box looks like. A4 box size: 10 cm x 10.5 cm.

Depending on the original paper size, the boxes may be larger or smaller. They can also be narrow or wide. The narrower and longer the sheet of paper, the narrower the box will be. Now you know how to make a paper box with your own hands in just 5 minutes.

Having learned how to make boxes, you can move on to boxes made of thick paper and even thin cardboard. The finished box can be painted with gouache or covered with multi-colored paper. From the boxes you can make boxes for children’s “jewels”, cribs for small dolls, original vases for cookies, store buttons, or change from pockets..

If you are busy sewing, cutting paper, and you need a temporary trash can, you can very quickly, whip up, create a trash container from a sheet of paper.

The boxes can be used as disposable tableware at a picnic, in the car, they can be made from literally anything you can get your hands on, even newspaper or napkins.